slarrk.f(3) [debian man page]
slarrk.f(3) LAPACK slarrk.f(3) NAME
slarrk.f - SYNOPSIS
Functions/Subroutines subroutine slarrk (N, IW, GL, GU, D, E2, PIVMIN, RELTOL, W, WERR, INFO) SLARRK Function/Subroutine Documentation subroutine slarrk (integerN, integerIW, realGL, realGU, real, dimension( * )D, real, dimension( * )E2, realPIVMIN, realRELTOL, realW, realWERR, integerINFO) SLARRK Purpose: SLARRK computes one eigenvalue of a symmetric tridiagonal matrix T to suitable accuracy. This is an auxiliary code to be called from SSTEMR. To avoid overflow, the matrix must be scaled so that its largest element is no greater than overflow**(1/2) * underflow**(1/4) in absolute value, and for greatest accuracy, it should not be much smaller than that. See W. Kahan "Accurate Eigenvalues of a Symmetric Tridiagonal Matrix", Report CS41, Computer Science Dept., Stanford University, July 21, 1966. Parameters: N N is INTEGER The order of the tridiagonal matrix T. N >= 0. IW IW is INTEGER The index of the eigenvalues to be returned. GL GL is REAL GU GU is REAL An upper and a lower bound on the eigenvalue. D D is REAL array, dimension (N) The n diagonal elements of the tridiagonal matrix T. E2 E2 is REAL array, dimension (N-1) The (n-1) squared off-diagonal elements of the tridiagonal matrix T. PIVMIN PIVMIN is REAL The minimum pivot allowed in the Sturm sequence for T. RELTOL RELTOL is REAL The minimum relative width of an interval. When an interval is narrower than RELTOL times the larger (in magnitude) endpoint, then it is considered to be sufficiently small, i.e., converged. Note: this should always be at least radix*machine epsilon. W W is REAL WERR WERR is REAL The error bound on the corresponding eigenvalue approximation in W. INFO INFO is INTEGER = 0: Eigenvalue converged = -1: Eigenvalue did NOT converge Internal Parameters: FUDGE REAL , default = 2 A "fudge factor" to widen the Gershgorin intervals. Author: Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. Date: November 2011 Definition at line 145 of file slarrk.f. Author Generated automatically by Doxygen for LAPACK from the source code. Version 3.4.1 Sun May 26 2013 slarrk.f(3)
Check Out this Related Man Page
slarrd.f(3) LAPACK slarrd.f(3) NAME
slarrd.f - SYNOPSIS
Functions/Subroutines subroutine slarrd (RANGE, ORDER, N, VL, VU, IL, IU, GERS, RELTOL, D, E, E2, PIVMIN, NSPLIT, ISPLIT, M, W, WERR, WL, WU, IBLOCK, INDEXW, WORK, IWORK, INFO) SLARRD Function/Subroutine Documentation subroutine slarrd (characterRANGE, characterORDER, integerN, realVL, realVU, integerIL, integerIU, real, dimension( * )GERS, realRELTOL, real, dimension( * )D, real, dimension( * )E, real, dimension( * )E2, realPIVMIN, integerNSPLIT, integer, dimension( * )ISPLIT, integerM, real, dimension( * )W, real, dimension( * )WERR, realWL, realWU, integer, dimension( * )IBLOCK, integer, dimension( * )INDEXW, real, dimension( * )WORK, integer, dimension( * )IWORK, integerINFO) SLARRD Purpose: SLARRD computes the eigenvalues of a symmetric tridiagonal matrix T to suitable accuracy. This is an auxiliary code to be called from SSTEMR. The user may ask for all eigenvalues, all eigenvalues in the half-open interval (VL, VU], or the IL-th through IU-th eigenvalues. To avoid overflow, the matrix must be scaled so that its largest element is no greater than overflow**(1/2) * underflow**(1/4) in absolute value, and for greatest accuracy, it should not be much smaller than that. See W. Kahan "Accurate Eigenvalues of a Symmetric Tridiagonal Matrix", Report CS41, Computer Science Dept., Stanford University, July 21, 1966. Parameters: RANGE RANGE is CHARACTER*1 = 'A': ("All") all eigenvalues will be found. = 'V': ("Value") all eigenvalues in the half-open interval (VL, VU] will be found. = 'I': ("Index") the IL-th through IU-th eigenvalues (of the entire matrix) will be found. ORDER ORDER is CHARACTER*1 = 'B': ("By Block") the eigenvalues will be grouped by split-off block (see IBLOCK, ISPLIT) and ordered from smallest to largest within the block. = 'E': ("Entire matrix") the eigenvalues for the entire matrix will be ordered from smallest to largest. N N is INTEGER The order of the tridiagonal matrix T. N >= 0. VL VL is REAL VU VU is REAL If RANGE='V', the lower and upper bounds of the interval to be searched for eigenvalues. Eigenvalues less than or equal to VL, or greater than VU, will not be returned. VL < VU. Not referenced if RANGE = 'A' or 'I'. IL IL is INTEGER IU IU is INTEGER If RANGE='I', the indices (in ascending order) of the smallest and largest eigenvalues to be returned. 1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0. Not referenced if RANGE = 'A' or 'V'. GERS GERS is REAL array, dimension (2*N) The N Gerschgorin intervals (the i-th Gerschgorin interval is (GERS(2*i-1), GERS(2*i)). RELTOL RELTOL is REAL The minimum relative width of an interval. When an interval is narrower than RELTOL times the larger (in magnitude) endpoint, then it is considered to be sufficiently small, i.e., converged. Note: this should always be at least radix*machine epsilon. D D is REAL array, dimension (N) The n diagonal elements of the tridiagonal matrix T. E E is REAL array, dimension (N-1) The (n-1) off-diagonal elements of the tridiagonal matrix T. E2 E2 is REAL array, dimension (N-1) The (n-1) squared off-diagonal elements of the tridiagonal matrix T. PIVMIN PIVMIN is REAL The minimum pivot allowed in the Sturm sequence for T. NSPLIT NSPLIT is INTEGER The number of diagonal blocks in the matrix T. 1 <= NSPLIT <= N. ISPLIT ISPLIT is INTEGER array, dimension (N) The splitting points, at which T breaks up into submatrices. The first submatrix consists of rows/columns 1 to ISPLIT(1), the second of rows/columns ISPLIT(1)+1 through ISPLIT(2), etc., and the NSPLIT-th consists of rows/columns ISPLIT(NSPLIT-1)+1 through ISPLIT(NSPLIT)=N. (Only the first NSPLIT elements will actually be used, but since the user cannot know a priori what value NSPLIT will have, N words must be reserved for ISPLIT.) M M is INTEGER The actual number of eigenvalues found. 0 <= M <= N. (See also the description of INFO=2,3.) W W is REAL array, dimension (N) On exit, the first M elements of W will contain the eigenvalue approximations. SLARRD computes an interval I_j = (a_j, b_j] that includes eigenvalue j. The eigenvalue approximation is given as the interval midpoint W(j)= ( a_j + b_j)/2. The corresponding error is bounded by WERR(j) = abs( a_j - b_j)/2 WERR WERR is REAL array, dimension (N) The error bound on the corresponding eigenvalue approximation in W. WL WL is REAL WU WU is REAL The interval (WL, WU] contains all the wanted eigenvalues. If RANGE='V', then WL=VL and WU=VU. If RANGE='A', then WL and WU are the global Gerschgorin bounds on the spectrum. If RANGE='I', then WL and WU are computed by SLAEBZ from the index range specified. IBLOCK IBLOCK is INTEGER array, dimension (N) At each row/column j where E(j) is zero or small, the matrix T is considered to split into a block diagonal matrix. On exit, if INFO = 0, IBLOCK(i) specifies to which block (from 1 to the number of blocks) the eigenvalue W(i) belongs. (SLARRD may use the remaining N-M elements as workspace.) INDEXW INDEXW is INTEGER array, dimension (N) The indices of the eigenvalues within each block (submatrix); for example, INDEXW(i)= j and IBLOCK(i)=k imply that the i-th eigenvalue W(i) is the j-th eigenvalue in block k. WORK WORK is REAL array, dimension (4*N) IWORK IWORK is INTEGER array, dimension (3*N) INFO INFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value > 0: some or all of the eigenvalues failed to converge or were not computed: =1 or 3: Bisection failed to converge for some eigenvalues; these eigenvalues are flagged by a negative block number. The effect is that the eigenvalues may not be as accurate as the absolute and relative tolerances. This is generally caused by unexpectedly inaccurate arithmetic. =2 or 3: RANGE='I' only: Not all of the eigenvalues IL:IU were found. Effect: M < IU+1-IL Cause: non-monotonic arithmetic, causing the Sturm sequence to be non-monotonic. Cure: recalculate, using RANGE='A', and pick out eigenvalues IL:IU. In some cases, increasing the PARAMETER "FUDGE" may make things work. = 4: RANGE='I', and the Gershgorin interval initially used was too small. No eigenvalues were computed. Probable cause: your machine has sloppy floating-point arithmetic. Cure: Increase the PARAMETER "FUDGE", recompile, and try again. Internal Parameters: FUDGE REAL, default = 2 A "fudge factor" to widen the Gershgorin intervals. Ideally, a value of 1 should work, but on machines with sloppy arithmetic, this needs to be larger. The default for publicly released versions should be large enough to handle the worst machine around. Note that this has no effect on accuracy of the solution. Contributors: W. Kahan, University of California, Berkeley, USA Beresford Parlett, University of California, Berkeley, USA Jim Demmel, University of California, Berkeley, USA Inderjit Dhillon, University of Texas, Austin, USA Osni Marques, LBNL/NERSC, USA Christof Voemel, University of California, Berkeley, USA Author: Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. Date: November 2011 Definition at line 319 of file slarrd.f. Author Generated automatically by Doxygen for LAPACK from the source code. Version 3.4.1 Sun May 26 2013 slarrd.f(3)