pactester(1)pactester(1)NAME
pactester - Tool to test proxy auto-config (pac) files.
SYNOPSIS
pactester <-p pacfile> <-u url> [-h host] [-c client_ip] [-e]
pactester <-p pacfile> <-f urlslist> [-c client_ip] [-e]
DESCRIPTION
pactester is a tool to test proxy auto-config (pac) files. It returns the proxy config string for the given URL and the pac file. pactester
uses pacparser C library for most of its functionality.
OPTIONS -p pacfile
PAC file to test. Specify "-" to read from the standard input.
-u url URL to test the PAC file for.
-h host
Host part of the URL. If not specified, it's determined from the URL.
-c client_ip
Client's IP address (as returned by the function myIpAddress() in PAC files). If not specified, it defaults to the IP address of
the machine on which this tool is running.
-e Enable Microsoft PAC extensions (dnsResolveEx, myIpAddressEx, isResolvableEx).
-f urlslist
A file containing the list of URLs to be tested. This is good for testing a PAC file against a set of URLs.
EXAMPLES
To find out the proxy config string for the pac file "wpad.dat" and the URL "http://www.google.com":
$ pactester -p wpad.dat -u http://www.google.com
For a client with IP address 10.0.12.123:
$ pactester -p wpad.dat -c 10.0.12.123 -u http://www.google.com
For a pac file hosted at http://wpad/wpad.dat:
$ curl -s http://wpad/wpad.dat | pactester -p - -u http://google.com
BUGS
If you have come across a bug in pactester, please submit a bug report at http://code.google.com/p/pacparser/issues/list.
AUTHOR
Written by Manu Garg (http://www.manugarg.com).
RESOURCES
Homepage: http://code.google.com/p/pacparser.
pactester(1)
Check Out this Related Man Page
wpad(1M) System Administration Commands wpad(1M)NAME
wpad - WPA and WPA2 protocol daemon
SYNOPSIS
/usr/lib/inet/wpad [-i interface] [-k pre_shared_key_name]
DESCRIPTION
The wpad daemon provides common client functionality for the WiFi Protected Access (WPA) versions 1 and 2, as defined by IEEE802.11i stan-
dard. WPA was created by the WiFi Alliance, an industry trade group. WPA implements the majority of the IEEE 802.11i standard, and was
intended as an intermediate measure to take the place of Wired Equivalent Privacy (WEP) while 802.11i was prepared. WPA2 implements the
full standard.
wpad provides the following WPA/IEEE 802.11i features:
o WPA-PSK ("WPA-Personal")
o Key management for CCMP, TKIP, WEP104, WEP40
Stop and start the wpad daemon using dladm(1M). Use:
# dladm connect-wifi
...to start the wpad daemon. Use:
# dladm disconnect-wifi
...to stop the daemon.
OPTIONS
The following options are supported:
-i interface
Specify a WiFi Link interface to start the wpad daemon.
-k pre_shared_key_name
Specify the pre-shared key used for the WiFi Link.
EXAMPLES
Example 1 Starting the wpad Daemon on Specific WiFi Link
To create the WPA key psk, enter the following command:
# dladm create-secobj -c wpa psk
To use key psk to connect to ESSID wlan on link ath0, enter the following command:
# dladm connect-wifi -k psk -e wlan ath0
Example 2 Stopping the wpad Daemon on Specific WiFi Link
To stop the daemon on the link ath0, enter:
# dladm disconnect-wifi ath0
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWwpau, SUNWwpar |
+-----------------------------+-----------------------------+
|Interface Stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), dladm(1M), svcadm(1M), attributes(5), smf(5)NOTES
The wpad service is managed by the service management facility, smf(5), under the service identifier:
svc:/network/wpa:<link>
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
SunOS 5.11 11 Mar 2008 wpad(1M)