aseqnet(1) General Commands Manual aseqnet(1)NAME
aseqnet - ALSA sequencer connectors over network
SYNOPSIS
aseqnet [remotehost]
DESCRIPTION
aseqnet is an ALSA sequencer client which sends and receives event packets over network. Suppose two hosts connected by network, hostA as
a server and hostB as a client. The ALSA sequencer system must be running on both hosts. For creating the server port, run the following
on hostA:
hostA% aseqnet
sequencer opened: 128:0
Then a user client 128 with port 0 was opened on hostA. (The client number may vary.) For creating the (network-)client port, run aseqnet
with the hostname of the server:
hostB% aseqnet hostA
sequencer opened: 132:0
Now all events sent to hostA:128:0 are transferred to hostB:132:0, and vice versa.
The ports created by aseqnet can be connected arbitrary to other sequencer ports via aconnect(1). For example, to connect hostB:132:0 to a
MIDI output device 65:0:
hostB% aconnect 132:0 65:0
Then events to hostA:128:0 will be delivered to hostB:65:0. The following command plays MIDI on hostB.
hostA% pmidi -p 128:0 foo.mid
The multiple clients may exist simultaneously. If hostC is connected as a client to hostA, events from from hostA are sent to all con-
nected network clients, i.e. hostB and hostC. However, only one connection is allowed from a client to a server.
To disconnect network, stop all clients before server by ctrl-C or sending signal to them. The server will automatically quit.
OPTIONS -p port
Specify the TCP port number or TCP service name.
-s addr
Subscribe to the given address for read automatically.
-d addr
Subscribe to the given address for write automatically.
-v Verbose mode.
SEE ALSO aconnect(1), pmidi(1)AUTHOR
Takashi Iwai <tiwai@suse.de>.
January 1, 2000 aseqnet(1)
Check Out this Related Man Page
aconnect(1) General Commands Manual aconnect(1)NAME
aconnect - ALSA sequencer connection manager
SYNOPSIS
aconnect [-d] [-options] sender receiver
aconnect -i|-o [-options]
aconnect -x
DESCRIPTION
aconnect is a utility to connect and disconnect two existing ports on ALSA sequencer system. The ports with the arbitrary subscription
permission, such as created by aseqview(1), can be connected to any (MIDI) device ports using aconnect. For example, to connect from port
64:0 to 65:0, run as follows:
% aconnect 64:0 65:0
The connection is one-way, and the whole data to the sender port (64:0) is redirected to the receiver port (65:0). When another port (e.g.
65:1) is attached to the same sender port, the data is sent to both receiver ports. For disconnection, use -d option.
% aconnect -d 64:0 65:0
The address can be given using the client's name.
% aconnect External:0 Emu8000:1
Then the port 0 of the client matching with the string "External" is connected to the port 1 of the client matching with the "Emu8000".
Another function of aconnect is to list the present ports on the given condition. The input ports, which may become sender ports, can be
listed with -i option.
% aconnect -i
client 0: 'System' [type=kernel]
0 'Timer '
1 'Announce '
client 64: 'External MIDI-0' [type=kernel]
0 'MIDI 0-0 '
Similarly, to see the output ports, use -o flag.
You can remove all existing exported connections using -x option. This function is useful for terminating the ALSA drivers, because the
modules with sequencer connections cannot be unloaded unless their connections are removed.
OPTIONS
CONNECTION MANAGEMENT
-d, --disconnect
Disconnect the given subscription.
-e, --exclusive
Connect ports with exclusive mode. Both sender and receiver ports can be no longer connected by any other ports.
-r, --real queue
Convert time-stamps of event packets to the current value of the given real-time queue. This is option is, however, not so useful,
since the receiver port must use (not necessarily own) the specified queue.
-t, --tick queue
Like -r option, but time-stamps are converted to the current value of the given tick queue.
LIST PORTS
-i, --input
List existing input (readable) ports. This option is exclusive to -o.
-o, --output
List existing output (writable) ports. This option is exclusive to -i.
-l, --list
List the current connection status. The connected and connecting ports from/to each port are listed together. The suffix flag [ex]
means the connection is exclusive. The suffix flag [real:#] and [tick:#] mean the connection includes real-time and tick conversion
on the listed queue, respectively.
REMOVE ALL CONNECTIONS
-x, --removeall
Remove all exported connections.
SEE ALSO aseqnet(1), aseqview(1)AUTHOR
Takashi Iwai <tiwai@suse.de>
August 31, 2000 aconnect(1)