PACEMAKER(8) System Administration Utilities PACEMAKER(8)NAME
Pacemaker - Part of the Pacemaker cluster resource manager
SYNOPSIS
crm_node command [options]
DESCRIPTION
crm_node - Tool for displaying low-level node information
OPTIONS
-?, --help
This text
-$, --version
Version information
-V, --verbose
Increase debug output
-Q, --quiet
Essential output only
Stack:
-A, --openais
Only try connecting to an OpenAIS-based cluster
-H, --heartbeat
Only try connecting to a Heartbeat-based cluster
Commands:
-n, --name
Display the name used by the cluster for this node
-N, --name-for-id=value
Display the name used by the cluster for the node with the specified id
-e, --epoch
Display the epoch during which this node joined the cluster
-q, --quorum
Display a 1 if our partition has quorum, 0 if not
-l, --list
Display all known members (past and present) of this cluster (Not available for heartbeat clusters)
-p, --partition
Display the members of this partition
-i, --cluster-id
Display this node's cluster id
-R, --remove=value
(Advanced) Remove the (stopped) node with the specified name from Pacemaker's configuration and caches
In the case of Heartbeat, CMAN and Corosync 2.0, requires that the node has already been removed from the underlying cluster
Additional Options:
-f, --force
AUTHOR
Written by Andrew Beekhof
REPORTING BUGS
Report bugs to pacemaker@oss.clusterlabs.org
Pacemaker 1.1.10-29.el7 June 2014 PACEMAKER(8)
Check Out this Related Man Page
PACEMAKER(8) System Administration Utilities PACEMAKER(8)NAME
Pacemaker - Part of the Pacemaker cluster resource manager
SYNOPSIS
attrd_updater command -n attribute [options]
DESCRIPTION
attrd_updater - Tool for updating cluster node attributes
OPTIONS
-?, --help
This text
-$, --version
Version information
-V, --verbose
Increase debug output
-q, --quiet
Print only the value on stdout
-n, --name=value
The attribute's name
Commands:
-U, --update=value
Update the attribute's value in attrd. If this causes the value to change, it will also be updated in the cluster configuration
-Q, --query
Query the attribute's value from attrd
-D, --delete
Delete the attribute in attrd. If a value was previously set, it will also be removed from the cluster configuration
-R, --refresh
(Advanced) Force the attrd daemon to resend all current values to the CIB
Additional options:
-l, --lifetime=value
Lifetime of the node attribute. Allowed values: forever, reboot
-d, --delay=value
The time to wait (dampening) in seconds further changes occur
-s, --set=value
(Advanced) The attribute set in which to place the value
AUTHOR
Written by Andrew Beekhof
REPORTING BUGS
Report bugs to pacemaker@oss.clusterlabs.org
Pacemaker 1.1.10-29.el7 June 2014 PACEMAKER(8)
Hello,
Under ksh I have to run a script on one of the nodes of a Solaris 8 cluster which at some time must execute a command on the alternate node:
# rsh <name> "command"
I have to implement this script on all the clusters of my company (a lot of...).
Fortunately, the names of the two nodes... (11 Replies)
I have rcently setup a 4 node cluster running sun cluster 3.2
and I have installed 4 zones on each node. when installing the zones I had to install the zone on all nodes the on the last node do a zlogin -C <zonename>
this worked ok.
theni I tried to siwitch the zone to node a thei work... (14 Replies)
Hello all,
I have two twins Proliant DL580 G3 with RHEL4U4 clustered with Oracle RAC with two nics working in each one.
All nics have the same firmware, driver and type of physical cable connected (Cat 5E). All ports of the switch have the same configuration but only one of the nics of only... (9 Replies)
Hi Guys,
I have to design a multinode hacmp cluster and am not sure if the design I am thinking of makes any sense.
I have to make an environment that currently resides on 5 nodes more resilient but I have the constrain of only having 4 frames. In addition the business doesnt want to pay for... (7 Replies)
Hi,
Newbie to the cluster, Would like to some basic idea on the cluster framework.:confused:
Any pointer to a link which is useful.:p
How to explain on cluster's disk? :(
Scenario, node1, node2, Storage1 and Storage2.
1. If storage1 attached to node1, and node1 fault; node1 failed to... (10 Replies)
I am trying to set up a two host cluster. trouble is with the cluster transport configuration.
i'm using e1000g2 and g3 for the cluster transport. global0 and global1 are my two nodes, and I am running the scinstall from global1.
i think i should be expecting, is this:
The following... (19 Replies)
I've configured multiple clusters using PowerHA 5.5, but never using the 'Two-node cluster configuration assistant'. I removed all the clusters, clean setup, and gave the assistant a try. I've filled in all the necessary options:
Communication Path to Takeover Node
Application Server
... (11 Replies)
Hi All,
I got a big problem here.
While setting up a sun cluster, I accidentally tried out "bootadm update-archive" as I was unable to bring the cluster up.
After which, i tried a reconfiguration reboot.
Now The system is always booting into maintanence mode with error message... (8 Replies)
Hi All,
I am preparing a script which executes following things:
1) Logs into 8 cluster one by one.
2) After logging into each cluster,it prints the cluster name & then exit from that cluster.
3) Then it logs to next cluster & peform the same task.
Here is what i have written :
for... (8 Replies)
Hello Everyone,
Hope you all doing well. I have configured a powerHA with 2 RG. Whenever am moving a RG to the 2 node, the 2 node becoming unavailable. But its working fine in the console also cluster not having any issues. Once i ran the tcp/ip configuration via smitty , the node... (9 Replies)
when i am connecting to AIX machine from Windows XP through Xmanager am getting dots per inch problem and here we are connecting to AIX machine using X Server virtual frame buffer . Please set 90x90 dots per inch to X Server virtual frame buffer. (10 Replies)
I have troubles making clstat work. All the "usual suspects" have been covered but still no luck. The topology is a two-node active/passive with only one network-interface (it is a test-setup). The application running is SAP with DB/2 as database. We do not use SmartAssists or other gadgets.
... (8 Replies)
Hi all,
Few hours ago I did some changes in our Solaris cluster servers. Below are changes I did :
1. Installed latest Solaris 10 patchset from oracle.
2. Enabled BSM log module. Entered into single user mode and rebooted. After reboot changed to multi-user mode and rebooted again.
Now... (7 Replies)
Hi
I am having two node cluster. I was trying to change the to use scsi3 reservation for all disks having two paths. Please let me know where I went wrong or there any issue to implement the same.
On node1
bash-3.2# cldev status
=== Cluster DID Devices ===
Device Instance ... (8 Replies)