suninstall(1M) System Administration Commands suninstall(1M)NAME
suninstall - install the Solaris operating system
SYNOPSIS
suninstall
DESCRIPTION install-solaris(1M) is now the preferred command for starting and restarting the Solaris Installation program. It should be used instead of
suninstall. suninstall is symbolically linked to install-solaris.
suninstall is a forms-based and graphical subsystem for installing the operating system.
suninstall exists only on the Solaris installation media (CD or DVD) and should only be invoked from there. Refer to the Solaris 10 Instal-
lation Guide: Basic Installations for more details.
suninstall allows installation of the operating system onto any standalone system. suninstall loads the software available on the installa-
tion media. Refer to the Solaris 10 Installation Guide: Basic Installations for disk space requirements.
USAGE
Refer to the Solaris 10 Installation Guide: Basic Installations for more information on the various menus and selections.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
SEE ALSO pkginfo(1), install(1M), install-solaris(1M), pkgadd(1M), attributes(5)
Solaris 10 Installation Guide: Basic Installations
NOTES
It is advisable to exit suninstall by means of the exit options in the suninstall menus.
SunOS 5.10 9 Sep 2004 suninstall(1M)
Check Out this Related Man Page
suninstall(1M) System Administration Commands suninstall(1M)NAME
suninstall - install the Solaris operating system
SYNOPSIS
suninstall
DESCRIPTION install-solaris(1M) is now the preferred command for starting and restarting the Solaris Installation program. It should be used instead of
suninstall. suninstall is symbolically linked to install-solaris.
suninstall is a forms-based and graphical subsystem for installing the operating system.
suninstall exists only on the Solaris installation media (CD or DVD) and should only be invoked from there. Refer to the Solaris 10 Instal-
lation Guide: Basic Installations for more details.
suninstall allows installation of the operating system onto any standalone system. suninstall loads the software available on the installa-
tion media. Refer to the Solaris 10 Installation Guide: Basic Installations for disk space requirements.
USAGE
Refer to the Solaris 10 Installation Guide: Basic Installations for more information on the various menus and selections.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
SEE ALSO pkginfo(1), install(1M), install-solaris(1M), pkgadd(1M), attributes(5)
Solaris 10 Installation Guide: Basic Installations
NOTES
It is advisable to exit suninstall by means of the exit options in the suninstall menus.
SunOS 5.10 9 Sep 2004 suninstall(1M)
I want to add auto startup and shutdown script to Solaris 10's legacy services as they run in Solaris 9 or in Linux.
To make this work, I created the crontrol script in /etc/init.d and then link it to /etc/rc0.d and /etc/rc2.d directories. rc0.d is for shutdown and rc2.d is for srat. After I... (15 Replies)
Hello
I wonder if someone could help me in reading a raw (non-Solaris) disk on a Solaris system...
I have an IDE HDD in my Sun Blade and would like to read it (using C). It appears on the system and with the format command shows up as c0t1d0.
I use the dd command to read the disk as such:... (19 Replies)
Hey guys,
I am somewhat new to Solaris - and very new when it comes to mounts.
My problem is that when I installed Solaris, I allocated way too little diskspace to my / mount (it first became obvious now, however, because of new needs).
bash-3.00# df -h
Filesystem size ... (25 Replies)
hi everyone,
can someone suggest how i can list the contents of a directory and display their corresponding last modify time in the format yyyymmddhhmm?
thanks in advance! (16 Replies)
Just installed Solaris X86 on a Intel laptop. The installation went well however, at the boot screen, I get 2 options:
Solaris 10/10/08 s10x_u6wos_07b X86
Solaris failsafe
If I select Solaris 10/10/08 s10x_u6wos_07b X86, the system goes to black screen then reboots. Trying to figure out... (15 Replies)
Hi,
I have Solaris zone configured with Solaris 9 and 10.
In Solaris 10(non global), I use the command “zonename” to get whether it is global or non-global server.
For Solaris 9, what command I can use to get whether it is global or non-global server.
Regards,
Kalai :confused: (25 Replies)
Hi everyone new to Solaris 10 and Linix and am having problems changing back the OBP from RSC ( Remote System Control).
I bought a SunFire 280R Server a month or two ago, installed Solaris 10 on to it. Have been trying to setup correct settings and came across a guide on Oracle website which... (20 Replies)
I'm investigating AIX/HP-UX/Solaris for use in a research environment. Although there is plenty of technical documentation online, some important questions can only be answered from long user experience. I'd like to hear whatever you can contribute if you can compare at least two of these.
To... (16 Replies)
Version: Solaris 10 (August 2011) on VM
I am kind of new to Solaris.From VM workstation i allocated 35 GB to this Solaris VM's Disk
The disk was named
c1t0d0
Few basic slices for root(8gb), swap(517mb) and /export/home(494mb) were created by the solaris Installer during the... (18 Replies)
I am installing a IBM package (ILMT) on Solaris-10 box, which is having few non global zones. It is not allowing me to remove old package and not allowing me to install new one.
root@pqdb_s50:/root# pkgrm ILMT-TAD4D-agent
## Waiting for up to <300> seconds for package administration commands to... (18 Replies)
Hello, I have problems with Automated Installer on Solaris 11. I tried provision Solaris 11 on my T5-1B server from Ops Center, but AI set wrong IP address for manifest SMF. My Ops Center server has two IP addresses 10.236.102.219 and 10.226.21.141. Second IP is in subnet for provisioning of... (25 Replies)
hi team,
I'm a new with Solaris system and i'm a french, so my english will not be very good but I'll try to explain my problem.
I have a Sun server SunFire X4170 with Solaris 10 as OS.
since last week I am not able to access on /vol1 anymore. And bellow are the warning messages which are... (20 Replies)
Hello,
I have a sun v880 that i got from ebay for cheap as a way to to learn Solaris and sun hardware in general.
The machine currently has OBP 4.7.0 2002/10/25 and i was wondering if there was a way to update the prom with out and active solaris install, as currently when i proceed with the... (29 Replies)
Hi, I need help changing PS1 in Solaris. I tried this:
MYPROMPT="> "
PS1=$LOGNAME@$HOSTNAME:${PWD}$MYPROMPT (NOT SURE WHY IT'S HIGHLIGHTED HERE)
export PS1
My problem is that $PWD is not working, when I get the prompt and I change directories, the prompt is not displaying the current... (17 Replies)
Hello Everyone,
I'm new to Solaris, less than a week to give an idea how green I am.:eek: Although new to UNIX, I've been running Linux (i.e. OpenSUSE, Ultimate Edition, Arch, and obviously Ubuntu) for many years, so, I decided to put Solaris 11 on my 12 core opteron. I had a bit of difficulty... (23 Replies)