measuring traffic with iptables

8 More Discussions You Might Find Interesting

1. Debian

Linux outbound traffic filtering with: cgroups + tc + iptables

I spent a lot of time trying to implement outbound traffic filtering with: cgroups + tc + iptables on Debian Jessie. Unfortunately there is still something wrong. The biggest issue is: - cgroups install + config - net_cls subsystem implementation - packets marking with net_cls - appropriate...

2. IP Networking

Dividing traffic with u32 iptables filter

I would like to divide traffic between two squid servers. I have been thinking about using iptables u32 filter, to check last bit of ip address which is comming to gateway. Then I would like to direct even IP adresses to one squid host, and odd to the other. Is it reasonable ? Thank you for...

3. Ubuntu

Iptables forward traffic to forward chain!!!

Hi, I am new to linux stuff. I want to use linux iptables to configure rule so that all my incoming traffic with protocol "tcp" is forwarded to the "FORWARD CHAIN". The traffic i am dealing with has destination addresss of my machine but i want to block it from coming to input chain and somehow...

4. IP Networking

Traffic shaping with iptables

hello, I have a postfix & a local dns running on a single server. this server is connected to internet via a low bandwidth line(with fixed ip). we also have another high speed adsl (dynamic ip). i want to divert all dns request from the local dns & postfix from the server to the adsl...

5. Shell Programming and Scripting

Block incoming traffic FTP from internet using iptables

Hi everybody. I have the next scenary: eth0: WAN eth1: DMZ eth2: LAN I need to block all incoming trafic from the internet through my network LAN using iptables. I have squid but i need to do this using ipatbles. I have been listening about iptables -A FORDAWARD but I am stuck right...

6. Programming

Measuring memory used by a program?

I have a Java program. I want to measure the total memory used by the program, especially the peak memory. Is there a way to do it? I have tried utilities like time (which returns 0) and top (which is not very useful) as the program does not run for long. Can anyone suggest a way to do this?...

7. IP Networking

Iptables/TC: how to make masqueraded traffic go through an openVPN tun0?

Hi all! We have a setup of three computers; Machine A (eth0) -> Machine B (eth0, hso0, tun0) -> Machine C (eth0, tun0) hso0 is the packet interface of a 3G modem, it behaves like a normal network interface. Machine B and C are connected in a VPN using openVPN (TCP). Machine A is a...

8. Programming

Measuring System Call Time

Can anyone please help me in measuring the system call timings! How do I do it if I have to measure the timing of an operation, say getpid system call. What different functions can I use for that and what would be the difference using each of them? Thanx!

LEARN ABOUT DEBIAN

ql-set-cmd-timeout

ql-set-cmd-timeout(8)					       System Administration					     ql-set-cmd-timeout(8)

NAME

       ql-set-cmd-timeout - set the timeout on the devices connected to the QLogic FC HBA.

SYNOPSIS

       ql-set-cmd-timeout [OPTIONS]

DESCRIPTION

       QLogic Linux Set Device Timeout Utility

       This  utility allows you to set the timeout on the devices connected to the QLogic FC HBA.  This timeout value applies to the commands sent
       to the device. This can help when target devices take longer to execute a command, for example under heavy I/O. Setting	a  longer  timeout
       reduces the chance of the Linux SCSI mid-layer driver aborting the tasks after a timeout.

	      [DEFAULT]

	      Display timeout of devices connected to all HOSTs

	      [HOST]

	      Display timeout of devices connected to HOST

	      [HOST] [TARGET]

	      Display timeout of devices connected to a TARGET on HOST

	      [HOST] [TARGET] [TIMEOUT]

	      To set timeout on devices connected to a TARGET on HOST

       -h,  --help, ?
	      Prints this help message

       -i,  --interactive
	      Use this option to use the menu driven program

SEE ALSO

       ql-dynamic-tgt-lun-disc(8), ql-lun-state-online(8), ql-hba-snapshot(8)

Matthias Schmitz <;matthias@sigxcpu.org> 			    August 2008 					     ql-set-cmd-timeout(8)

IP Networking