10 More Discussions You Might Find Interesting
1. Solaris
Hi folks,
I was patching Sun server (SunOS suns121 5.10 Generic_144488-17 sun4v sparc SUNW,Sun-Fire-T200) with the lateset bundle. It was completed with no errors. Server was restarted with shutdown command
(/usr/sbin/shutdown -y -i6 -g0) after patching was complete. However, after that,... (3 Replies)
Discussion started by: zulu1
3 Replies
2. Solaris
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
... (6 Replies)
Discussion started by: insatiable1610
6 Replies
3. Solaris
I got a Power supply failure. I replaced the power supply and still got the error.
Any ideas on what I should try next? (1 Reply)
Discussion started by: 642fiddi
1 Replies
4. Hardware
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies
5. Solaris
This may be a stupid question, but I don't want to take any chances.
I have a Sun T2000 in production. I want to run the "resetsc" command on the ALOM controller to active an IP address change. Will resetting ALOM affect the running OS?
Thanks (2 Replies)
Discussion started by: soliberus
2 Replies
6. Solaris
Hi Guys,
I am unable to turn on the locator led light on a SUN T2000 machine
# uname -a
SunOS node1 5.10 Generic_137137-09 sun4v sparc SUNW,Sun-Fire-T200
when i try to turn it on I have following error.
# locator -n
'system' locator not found
Although the hardware specfication... (5 Replies)
Discussion started by: Asteroid
5 Replies
7. Solaris
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies
8. Solaris
Hi
I am fresher in Virtualisation in solaris 10.I need to know how to install and configure guest OS, I have a server Sun T2000 with solaris 10 OS BASE.
How to install logical domain, what are the prerequest for installing l domain
can some one guide me what are the basic requirement to... (2 Replies)
Discussion started by: solaris8in
2 Replies
9. Solaris
Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems.
/var file system (/dev/md/rdsk/d425) is being checked.
run fsck -F ufs /dev/md/rdsk/d425
... (8 Replies)
Discussion started by: webster5u
8 Replies
10. Solaris
Hi Guyz,
I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso.
When trying to boot at the ok> boot cdrom
i get the following error:
-----------------------------------------------------------------------
Boot device:... (2 Replies)
Discussion started by: Mwamba
2 Replies
LED(4) BSD Kernel Interfaces Manual LED(4)
NAME
led -- API for manipulating LED's, lamps and other annunciators
SYNOPSIS
#include <dev/led/led.h>
typedef void led_t(void *priv, int onoff);
struct cdev *
led_create_state(led_t *func, void *priv, char const *name, int state);
struct cdev *
led_create(led_t *func, void *priv, char const *name);
void
led_destroy(struct cdev *);
DESCRIPTION
The led driver provides generic support for handling LEDs, lamps and other annunciators.
The hardware driver must supply a function to turn the annunciator on and off and the device name of the annunciator relative to /dev/led/.
The priv argument is passed back to this on/off function and can be used however the hardware driver sees fit.
The lamp can be controlled by opening and writing ASCII strings to the /dev/led/bla device.
In the following, we will use this special notation to indicate the resulting output of the annunciator:
* The annunciator is on for 1/10th second.
_ The annunciator is off for 1/10th second.
State can be set directly, and since the change happens immediately, it is possible to flash the annunciator with very short periods and syn-
chronize it with program events. It should be noted that there is a non-trivial overhead, so this may not be usable for benchmarking or mea-
suring short intervals.
0 Turn the annunciator off immediately.
1 Turn the annunciator on immediately.
Flashing can be set with a given period. The pattern continues endlessly.
f _*
f1 _*
f2 __**
f3 ___***
...
f9 _________*********
Three high-level commands are available:
d%d Numbers. Each digit is blinked out at 1/10th second, zero as ten pulses. Between digits a one second pause and after the last
digit a two second pause after which the sequence is repeated.
s%s String. This gives full control over the annunciator. Letters 'A' ... 'J' turn the annunciator on for from 1/10th to one full
second. Letters 'a' ... 'j' turn the annunciator off for 1/10th to one full second. Letters 'u' and 'U' turn the annunciator
off and on respectively when the next UTC second starts. Unless terminated with a '.', the sequence is immediately repeated.
m%s Morse.
'.' becomes '_*'
'-' becomes '_***'
' ' becomes '__'
'
' becomes '____'
The sequence is repeated after a one second pause.
FILES
/dev/led/*
EXAMPLES
A 'd12' flashes the lamp
*__________*_*______________________________
A 'sAaAbBa' flashes
*_*__**_
/usr/games/morse -l "Soekris rocks" > /dev/led/error
SEE ALSO
morse(6)
HISTORY
The led driver first appeared in FreeBSD 5.2.
AUTHORS
This software was written by Poul-Henning Kamp <phk@FreeBSD.org>.
This manual page was written by Sergey A. Osokin <osa@FreeBSD.org> and Poul-Henning Kamp <phk@FreeBSD.org>.
BSD
April 24, 2007 BSD