9 More Discussions You Might Find Interesting
1. Solaris
Hi Guys,
I have situation here ...
server M4000 server lost connectivity to storagetek 2540
, storagetek 2540 unable to be ping.From DAS URL the storage is undetected.
Any idea why this is happening. Please share.
Thank you.
Raj (1 Reply)
Discussion started by: muralirajah
1 Replies
2. Solaris
Bought a Sun StorageTek 2540 SAN array a few years ago from a company that was going out of business. When we first set it up, we were able to get all the software (Common Array Manager) and firmware directly from Sun.
We just upgraded the drives, but the array is too large for the firmware. Now... (6 Replies)
Discussion started by: edison303
6 Replies
3. Hardware
Hi Guys and Gals,
Wionder if you could help me, got a problem with a controller on a storagetek 2540, dead when fully powered up but if you reboot, it is ok for a couple of seconds (and you can ping it). Then once the array is fully up, it goes faulty and is un-pingable.
Had anyone... (4 Replies)
Discussion started by: callmebob
4 Replies
4. Hardware
Hi all,
My Sun StorageTek 2540 have redundant batteries, but a battery was failed.
# /opt/SUNWstkcam/bin/sscs list -d MyStorage1 fru
Name FRU Alarm State Status Revision Unique Id
-------------------------- ----------- --------... (2 Replies)
Discussion started by: buyantugs
2 Replies
5. Solaris
Hi peeps,
Was wondering if anyone can help me, got a couple of storagetek 2540's that I need to configure. Trouble is I think they were brought as second user as all that came with them was cables.
Does anyone know how to configure them (i.e. create raid sets and map to Luns and present... (1 Reply)
Discussion started by: callmebob
1 Replies
6. Solaris
Hi,
I have a simple question on how to correctly disable the matrix?
Looking for the Common Array Manager and I do not see this option...
Thank for help (3 Replies)
Discussion started by: bieszczaders
3 Replies
7. Filesystems, Disks and Memory
Hi,
We have 12x1TB SATA disks in our array and I need to create 10TB volume. I defined new storage profile on array and when I tried to add volume, I faced with ~2TB limit for new volumes. I didn't find how to set another limit on my storage profile. Is there is a way to configure one large... (3 Replies)
Discussion started by: Sapfeer
3 Replies
8. Solaris
We're moving our production 3510FC to development, so we need to replace the production 3510FC. The 6140 is nice, but pricey.
Here's the question: Would two 2540's (RAID 10) be 'faster' than one 3510? (RAID 10) and faster than one 6140 (RAID 10)?
One StoregeTek 6140 (16x72GB 15k rpm fc-al... (12 Replies)
Discussion started by: buddhavelvet
12 Replies
9. Solaris
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
Discussion started by: soliberus
4 Replies
SNMPTRANSLATE(1) Net-SNMP SNMPTRANSLATE(1)
NAME
snmptranslate - translate MIB OID names between numeric and textual forms
SYNOPSIS
snmptranslate [OPTIONS] OID [OID]...
DESCRIPTION
snmptranslate is an application that translates one or more SNMP object identifier values from their symbolic (textual) forms into their
numerical forms (or vice versa).
OID is either a numeric or textual object identifier.
OPTIONS
-D[TOKEN[,...]]
Turn on debugging output for the given TOKEN(s). Try ALL for extremely verbose output.
-h Display a brief usage message and then exit.
-m MIBLIST
Specifies a colon separated list of MIB modules to load for this application. This overrides the environment variable MIBS.
The special keyword ALL is used to specify all modules in all directories when searching for MIB files. Every file whose name does
not begin with "." will be parsed as if it were a MIB file.
-M DIRLIST
Specifies a colon separated list of directories to search for MIBs. This overrides the environment variable MIBDIRS.
-T TRANSOPTS
Provides control over the translation of the OID values. The following TRANSOPTS are available:
-Td Print full details of the specified OID.
-Tp Print a graphical tree, rooted at the specified OID.
-Ta Dump the loaded MIB in a trivial form.
-Tl Dump a labeled form of all objects.
-To Dump a numeric form of all objects.
-Ts Dump a symbolic form of all objects.
-Tt Dump a tree form of the loaded MIBs (mostly useful for debugging).
-Tz Dump a numeric and labeled form of all objects (compatible with MIB2SCHEMA format).
-V Display version information for the application and then exit.
-w WIDTH
Specifies the width of -Tp and -Td output. The default is very large.
In addition to the above options, snmptranslate takes the OID input (-I), MIB parsing (-M) and OID output (-O) options described in the
INPUT OPTIONS, MIB PARSING OPTIONS and OUTPUT OPTIONS sections of the snmpcmd(1) manual page.
EXAMPLES
o snmptranslate -On -IR sysDescr
will translate "sysDescr" to a more qualified form:
system.sysDescr
o snmptranslate -Onf -IR sysDescr
will translate "sysDecr" to:
.iso.org.dod.internet.mgmt.mib-2.system.sysDescr
o snmptranslate -Td -OS system.sysDescr
will translate "sysDecr" into:
SNMPv2-MIB::sysDescr
sysDescr OBJECT-TYPE
-- FROM SNMPv2-MIB
-- TEXTUAL CONVENTION DisplayString
SYNTAX OCTET STRING (0..255)
DISPLAY-HINT "255a"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A textual description of the entity. This
value should include the full name and
version identification of the system's
hardware type, software operating-system,
and networking software."
::= { iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) system(1) 1 }
o snmptranslate -Tp -OS system
will print the following tree:
+--system(1)
|
+-- -R-- String sysDescr(1)
| Textual Convention: DisplayString
| Size: 0..255
+-- -R-- ObjID sysObjectID(2)
+-- -R-- TimeTicks sysUpTime(3)
+-- -RW- String sysContact(4)
| Textual Convention: DisplayString
| Size: 0..255
+-- -RW- String sysName(5)
| Textual Convention: DisplayString
| Size: 0..255
+-- -RW- String sysLocation(6)
| Textual Convention: DisplayString
| Size: 0..255
+-- -R-- Integer sysServices(7)
+-- -R-- TimeTicks sysORLastChange(8)
| Textual Convention: TimeStamp
|
+--sysORTable(9)
|
+--sysOREntry(1)
|
+-- ---- Integer sysORIndex(1)
+-- -R-- ObjID sysORID(2)
+-- -R-- String sysORDescr(3)
| Textual Convention: DisplayString
| Size: 0..255
+-- -R-- TimeTicks sysORUpTime(4)
Textual Convention: TimeStamp
o snmptranslate -Ta | head
will produce the following dump:
dump DEFINITIONS ::= BEGIN
org ::= { iso 3 }
dod ::= { org 6 }
internet ::= { dod 1 }
directory ::= { internet 1 }
mgmt ::= { internet 2 }
experimental ::= { internet 3 }
private ::= { internet 4 }
security ::= { internet 5 }
snmpV2 ::= { internet 6 }
o snmptranslate -Tl | head
will produce the following dump:
.iso(1).org(3)
.iso(1).org(3).dod(6)
.iso(1).org(3).dod(6).internet(1)
.iso(1).org(3).dod(6).internet(1).directory(1)
.iso(1).org(3).dod(6).internet(1).mgmt(2)
.iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1)
.iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1)
.iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).sysDescr(1)
.iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).sysObjectID(2)
.iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).sysUpTime(3)
o snmptranslate -To | head
will produce the following dump
.1.3
.1.3.6
.1.3.6.1
.1.3.6.1.1
.1.3.6.1.2
.1.3.6.1.2.1
.1.3.6.1.2.1.1
.1.3.6.1.2.1.1.1
.1.3.6.1.2.1.1.2
.1.3.6.1.2.1.1.3
o snmptranslate -Ts | head
will produce the following dump
.iso.org
.iso.org.dod
.iso.org.dod.internet
.iso.org.dod.internet.directory
.iso.org.dod.internet.mgmt
.iso.org.dod.internet.mgmt.mib-2
.iso.org.dod.internet.mgmt.mib-2.system
.iso.org.dod.internet.mgmt.mib-2.system.sysDescr
.iso.org.dod.internet.mgmt.mib-2.system.sysObjectID
.iso.org.dod.internet.mgmt.mib-2.system.sysUpTime
o snmptranslate -Tt | head
will produce the following dump
org(3) type=0
dod(6) type=0
internet(1) type=0
directory(1) type=0
mgmt(2) type=0
mib-2(1) type=0
system(1) type=0
sysDescr(1) type=2 tc=4 hint=255a
sysObjectID(2) type=1
sysUpTime(3) type=8
SEE ALSO
snmpcmd(1), variables(5), RFC 2578-2580.
V5.6.2.1 20 Jul 2010 SNMPTRANSLATE(1)