Hi,
We had a hardware problem with an IBM System p5 server, with AIX 5.2
We restore from a tape the last backup we had, but the server does not boot up as expected.
The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is... (12 Replies)
Good Day All,
There are numerous results when searching google on this issue, however, none seem to have a solution.
I have read until my eyes bleed and banged my head on the table more than once! :)
I am hoping to resolve this issue -- or at least have a decent workaround.
It is a real... (13 Replies)
i have wireless usb adapter rtl8187 from micromax company
my proplem is the signal is very weak and i cannot open website
can i increase the signal ?
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0... (5 Replies)
Hi All,
I have dula OS on my system. With Windows and Linux(FC9). On Windows wireless setting works fine with wireless enabled.
Have installed Linux recently. Wireless is enabled, but i am not sure how to configure or make settings.
My laptop is Compaq and OS is FC9.
Please can anybody help... (1 Reply)
$ errpt | more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
3074FEB7 0802050205 T H fscsi1 ADAPTER ERROR
B8113DD1 0802050205 T H fcs1 LINK ERROR
B8113DD1 0802050205 T H fcs1 LINK ERROR
3074FEB7 0802050205 T H fscsi0 ADAPTER ERROR
B8113DD1 ... (2 Replies)
$ errpt | more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
3074FEB7 0802050205 T H fscsi1 ADAPTER ERROR
B8113DD1 0802050205 T H fcs1 LINK ERROR
B8113DD1 0802050205 T H fcs1 LINK ERROR
3074FEB7 0802050205 T H fscsi0 ADAPTER ERROR
B8113DD1 ... (0 Replies)
IWN(4) BSD Kernel Interfaces Manual IWN(4)NAME
iwn -- Intel IEEE 802.11n wireless network driver
SYNOPSIS
To compile this driver into the kernel, include the following lines in your kernel configuration file:
device iwn
device pci
device wlan
device firmware
You also need to select a firmware for your device. Choose one from:
device iwn1000fw
device iwn100fw
device iwn105fw
device iwn135fw
device iwn2000fw
device iwn2030fw
device iwn4965fw
device iwn5000fw
device iwn5150fw
device iwn6000fw
device iwn6000g2afw
device iwn6000g2bfw
device iwn6050fw
Or you can use
device iwnfw
to include them all.
Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5):
if_iwn_load="YES"
iwn1000fw_load="YES"
iwn100fw_load="YES"
iwn105fw_load="YES"
iwn135fw_load="YES"
iwn2000fw_load="YES"
iwn2030fw_load="YES"
iwn4965fw_load="YES"
iwn5000fw_load="YES"
iwn5150fw_load="YES"
iwn6000fw_load="YES"
iwn6000g2afw_load="YES"
iwn6000g2bfw_load="YES"
iwn6050fw_load="YES"
DESCRIPTION
The iwn driver provides support for:
Intel Centrino Advanced-N 6200
Intel Centrino Advanced-N 6205
Intel Centrino Advanced-N 6230
Intel Centrino Advanced-N 6235
Intel Centrino Advanced-N + WiMAX 6250
Intel Centrino Ultimate-N 6300
Intel Centrino Wireless-N 100
Intel Centrino Wireless-N 105
Intel Centrino Wireless-N 130
Intel Centrino Wireless-N 135
Intel Centrino Wireless-N 1000
Intel Centrino Wireless-N 1030
Intel Centrino Wireless-N 2200
Intel Centrino Wireless-N 2230
Intel Centrino Wireless-N 4965
Intel Centrino Wireless-N 5100
Intel Centrino Wireless-N 6150
Intel Centrino Wireless-N 6200
Intel Centrino Wireless-N 6250
Intel Centrino Wireless-N 6250
Intel Centrino Wireless-N + WiMAX 6150
Intel Ultimate N WiFi Link 5300
Intel Wireless WiFi Link 4965
Intel WiFi Link 5100
Intel WiMAX/WiFi Link 5150
Intel WiMAX/WiFi Link 5350
iwn supports station and monitor mode operation. Only one virtual interface may be configured at any time. For more information on config-
uring this device, see ifconfig(8).
This driver requires the firmware built with the iwnfw module to work.
EXAMPLES
Join an existing BSS network (i.e., connect to an access point):
ifconfig wlan create wlandev iwn0 inet 192.168.0.20
netmask 0xffffff00
Join a specific BSS network with network name ``my_net'':
ifconfig wlan create wlandev iwn0 ssid my_net up
Join a specific BSS network with 64-bit WEP encryption:
ifconfig wlan create wlandev iwn0 ssid my_net
wepmode on wepkey 0x1234567890 weptxkey 1 up
Join a specific BSS network with 128-bit WEP encryption:
ifconfig wlan create wlandev iwn0 wlanmode adhoc ssid my_net
wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
DIAGNOSTICS
iwn%d: device timeout The driver will reset the hardware. This should not happen.
iwn%d: firmware error The onboard microcontroller crashed for some reason. The driver will reset the hardware. This should not happen.
iwn%d: timeout waiting for firmware initialization to complete The onboard microcontroller failed to initialize in time. This should not
happen.
iwn%d: could not load firmware image '%s' The driver failed to load the firmware image using the firmware(9) subsystem. Verify the iwnfw(4)
firmware module is present.
iwn%d: could not load boot firmware An attempt to upload the boot firmware image to the onboard microcontroller failed. This should not
happen.
iwn%d: could not load microcode An attempt to upload the microcode image to the onboard microcontroller failed. This should not happen.
iwn%d: could not load main firmware An attempt to upload the main firmware image to the onboard microcontroller failed. This should not
happen.
SEE ALSO iwnfw(4), pci(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4), ifconfig(8), wpa_supplicant(8)AUTHORS
The original iwn driver was written by Damien Bergamini <damien.bergamini@free.fr>.
BSD August 30, 2014 BSD
