Login or Register to Ask a Question and Join Our Community


Filesystems, Disks and Memory

Problem replace disk with RAID-5 volumes

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums Hardware Filesystems, Disks and Memory Problem replace disk with RAID-5 volumes
# 1  
Old 05-26-2008
Problem replace disk with RAID-5 volumes
Good morning,

I have a problem replacing a disk with raid-5 volumes.
An hardware error was occurred from a disk c9t3 so all slices were in maintenace. Every slice is part of a raid-5 volume. Any replica is present.
Following Volume manager manual for replacing a disk, I have:

- phisically repleaced the failed disk
- logically repleaced with command devfsadm -C
- updated VM database with command metadevadm -u <disk>

then when I tried to paritioning disk, from command "format" I saw this info:

selecting c9t3d0
[disk formatted]
/dev/dsk/c9t3d0s0 is part of SVM volume raid:d155. Please see metaclear(1M)

d155 is only one of the 6 slices that are part of raid-5 metadevices but is enoght to block labelling disk.

I don't want to destroy metadevice d155 so I would find a work around for solving this problem

Anyone could help me please?

Thanks a lot


Regards
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Patching on Raid 0 Disk

Dear All , We need to do patching on one Solaris Server , where we have raid 0 configured. What is the process to patch a Server if RAID 0 (Concat/Stripe) is there. Below is the sample output. # metadb flags first blk block count a m pc luo 16 ... (1 Reply)
Discussion started by: jegaraman
1 Replies

2. Solaris

How do I replace a "good" RAID 1+0 disk?

Hi, I have a Solaris Volume Manager (aka Disksuite) RAID 1+0 device consisting of 12 devices. One of these is failing (it has logged several mechanical positioning errors), and I have a replacement disk. Normally, when a disk fails, volume manager marks it as failed, and replacing it is... (1 Reply)
Discussion started by: Twirlip
1 Replies

3. UNIX for Advanced & Expert Users

Identify failed disk in Linux RAID

Good Evening, 2 years ago, I set up an Ubuntu file-server for a friend, who is a photograph amateur. Basically, the server offers a software RAID-5 that can be accessed remotely from a MAC. Unfortunately, I didn't labeled the hard drives (i.e. which physical drive corresponds to the /dev/sdX... (2 Replies)
Discussion started by: Loic Domaigne
2 Replies

4. Ubuntu

Ubunutu 8.04.4 RAID 1 mirror replace disk

Hi, I have an Ubuntu system which I have an faulted mirror. I trying to replace the disk, but I'm stuck on that it boots and only showing GRUB GRUB ## ## End Default Options ## title Ubuntu 8.04.4 LTS, kernel 2.6.24-26-server root (hd0,0) kernel ... (0 Replies)
Discussion started by: jld
0 Replies

5. Solaris

Sun X-series - Raid/Volumes

Hi, Does anyone know of another tool/software to view the underlying disk config (raid volume) in the BIOS from the Solaris OS ? Tried raidctl but does not show info.. Thanks in advance, Gary... ---------- Post updated at 11:48 AM ---------- Previous update was at 11:14 AM ---------- ... (2 Replies)
Discussion started by: gt71027
2 Replies

6. Solaris

Configuring RAID using single disk

Hi All, I have a SUN ENTERPRISE 3500 server with solaris 10 on it. I have already mirrored root partition.Now i need to mirror two more partitions with 25GB space. But i have only one disk having 70GB space.Total i have 7 disks but each one is of 18 GB only except one. Please find the output of... (2 Replies)
Discussion started by: Renjesh
2 Replies

7. OS X (Apple)

Mount a disk elsewhere /Volumes

When a new disk is connected to a Mac/OSX, it automatically mounts on /Volumes. Is it possible to manually mount it elsewhere? For example, on "/raid"? - m66 - (5 Replies)
Discussion started by: makrell66
5 Replies

8. AIX

how to allow Windows platform to access Unix based disk volumes

How to allow Windows platform to access Unix(AIX) based disk volumes? (2 Replies)
Discussion started by: rainbow_bean
2 Replies

9. Solaris

Upgrade disk in RAID 1

I need to upgrade 2 x 73 GB disk and replace with 2 x 146 GB disk in sun v240. These disks contain boot and swap files These are mirrored disks with RAID 1 I am trining to create the correct procedure. So far the procedure I have is as follows: # metastat State: Okay ... (5 Replies)
Discussion started by: photon
5 Replies

10. Filesystems, Disks and Memory

Creating a Mirror RAID With Existing Disk

Hi there, I'm not sure if this is possible, but here is what I'd like to do.. I have an existing 160GB drive in my Redhat 9.0 server that I would like to add an additional 160GB drive to and create a mirrored RAID of the first disk to the new disk. I would like to do this without having to... (2 Replies)
Discussion started by: sysera
2 Replies
Login or Register to Ask a Question

LEARN ABOUT HPUX

vxbootsetup

vxbootsetup(1M) 														   vxbootsetup(1M)

NAME

       vxbootsetup - set up system boot information on a Veritas Volume Manager disk

SYNOPSIS

       /etc/vx/bin/vxbootsetup [-g diskgroup] [medianame ... ]

DESCRIPTION

       The  vxbootsetup utility configures physical disks so that they can be used to boot the system. Before vxbootsetup is called to configure a
       disk, the required volumes, standvol, rootvol and swapvol (and optionally, dumpvol) must be created on the disk.  All of these volumes must
       be contiguous with only one subdisk.

       The -g option may be used to specify the boot disk group.

       If  no  medianame arguments are specified, all disks that contain usable mirrors of the root, swap, /usr and /var volumes are configured to
       be bootable.

       If medianame arguments are given, only the disks that are associated with the specified disk names are configured to be bootable.

       vxbootsetup requires that:

       o    The root volume must be named rootvol and must have a usage type of root.

       o    The swap volume must be named swapvol and must have a usage type of swap.

       o    The volumes containing /usr and /var (if any) must be named usr and var, respectively.

       See the chapter "Recovery from Boot Disk Failure" in the Veritas Volume Manager Troubleshooting Guide for detailed information on  how  the
       system boots and how VxVM impacts the system boot process.  The vxmirror, vxrootmir, and vxresize utilities call vxbootsetup automatically.
       If you use vxassist, or vxmake and vxplex to create mirrors of the root volume on a disk, you must run vxbootsetup explicitly to  make  the
       disk bootable.

ARGUMENTS

       medianame
	    Specifies the disk name (disk media name) of a VM disk that is to be configured as bootable.

SEE ALSO

       disksetup(1M),  edvtoc(1M),  vxassist(1M),  vxevac(1M),	vxinstall(1M),	vxintro(1M),  vxmake(1M),  vxmirror(1M), vxplex(1M), vxresize(1M),
       vxrootmir(1M)

       Veritas Volume Manager Troubleshooting Guide

VxVM 5.0.31.1							    24 Mar 2008 						   vxbootsetup(1M)