10 More Discussions You Might Find Interesting
1. Solaris
Hello All,
I am attempting to boot and install Solaris 11 via live USB on a HP DL580 Gen9 Server.
Unfortunately, when I do this it boots into System Maintenance Mode.
The attachment (Pic1) shows what I am seeing via the console.
The BIOS is in UEFI boot. Does not work on legacy mode as I... (15 Replies)
Discussion started by: Kerbi
15 Replies
2. UNIX for Dummies Questions & Answers
I have 2 computers, from now on i shall call these computers A and B.
Made a live linux distro (bodhi) on A which has 1GB internal memory , because windows is unstable on B, which has 512MB internal memory.
I mean with memory the internal memory of the computer, not the memory of the usb... (0 Replies)
Discussion started by: anno
0 Replies
3. BSD
Hello, all. My english is not good.
I have a problem installing FreeBsd.
I have not CD-Roms, so i use program FlashBoot for convert iso-image to USB Device.
After, I was beginning to install FreeBsd (Sorry my english)
When it's time to choose an installation media, i select 9 USB:... (3 Replies)
Discussion started by: snet
3 Replies
4. Linux
Hello
Recently I found this (for me) really usefull tool kexec which can load a new Kernel while running one.
I tested it some times with the same kernel I was running, "rebooting" the system without powering it off at any time :D
But I need kexec basically just for live usbs. I want to start... (17 Replies)
Discussion started by: al0x
17 Replies
5. Red Hat
im using Dell Inspiron with windows 7 as operating system.....in my hard drive there is some 34 gb unpartitioned space and now i want to install fedora 13 into it, after installation it should be dual boot.
problem here is...
i have the fedora 13 image file ie fedora13-i386-DVD.iso file.
... (13 Replies)
Discussion started by: karthik437
13 Replies
6. Linux
Hi all
I have a usb external drive with two partitions sdb1 ntfs and sdb2 ext3 with label Linux
I copied a knoppix live distro in the second partition, then I installed grub on the drive. Now in the directory /media/sdb2/boot/grub i have the file device.map with the following content:
(hd0) ... (4 Replies)
Discussion started by: guast
4 Replies
7. BSD
When mounting a USB stick or pen drive on a FreeBSD machine I always issue the following command:
mount -t msdosfs /dev/da0s1 /mnt
Something I have always wondered is what the option msdosfs stands for and more importantly, why it is necessary. (7 Replies)
Discussion started by: figaro
7 Replies
8. UNIX for Dummies Questions & Answers
I have a number of questions regarding using usb sticks on xfce and freebsd.
1- Does the thunar volume manager (xfce plugin) actually provide a means to automount usb sticks? I have set all possible options in the volume manager, but have not had any automount yet.
2- Is there any utility on... (0 Replies)
Discussion started by: figaro
0 Replies
9. BSD
I inserted a 8GB usb stick in a number of machine with FreeBSD 7.1, but the medium was not detected:
$ dmesg | grep MB
usable memory = 4263022592 (4065 MB)
avail memory = 4082540544 (3893 MB)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ad0: 238475MB <WDC WD2500BEVT-00ZCT0... (6 Replies)
Discussion started by: figaro
6 Replies
10. UNIX for Dummies Questions & Answers
Hello,i have laserjet 1000 usb printer on fbsd 4.7
when i connect it to usb, usbdev tells me it is working, on port ulpt0 (whatever). When i send some data to port it doesn't tell me any error, printcap is modifyed according manual,
and
lpr -Plj /etc/rc.conf gives me following error
/kernel:... (1 Reply)
Discussion started by: hachik
1 Replies
FPGA_LOAD(8) FPGA_LOAD(8)
NAME
fpga_load - Xorcom Astribank (xpp) firmware tool
SYNOPSIS
fpga_load [-g] [-r] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV
fpga_load [-g] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV -I firmware.hex [-b dump.bin] [-i]
fpga_load -h
DESCRIPTION
fpga_load loads the FPGA firmware to the Xorcom Astribank device. The syntax resembles that of fxload(8).
OPTIONS
-b dump.bin
Before writing firmware, bump the processed binary file to dump.bin.
-D DEVICE
Required. The device to read from/write to. On modern UDEV-based system this is usually /dev/bus/usb/bus_num/device_num, where
bus_num and device_num are the first two numbers in the output of lsusb(8). On older systems that use usbfs, it is usually
/proc/bus/usb/bus_num/device_num.
-r
Reset the Astribank and renumerate its USB connection to power on product ID.
-g
Dump all eeprom data to standard output.
-I fireware_file
The firmware file to write to the device.
-i
Show information about the firmware file (valid only with -I option). Example:
./FPGA_1151.hex: Version=3297 Checksum=58270
In particular, the calculated checksum should match the output of sum(1) on the binary firmware file generated by the -b option.
-v
Increase verbosity. May be used multiple times.
-h
Displays usage message.
SEE ALSO
fxload(8), lsusb(8)
AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
16 April 2006 FPGA_LOAD(8)