Login or Register to Ask a Question and Join Our Community


AIX

LPAR cannot added disk

 
Thread Tools Search this Thread
Operating Systems AIX LPAR cannot added disk
Prev   Next
# 1  
Old 11-23-2016
LPAR cannot added disk
Dear All,

I created a new partition through "Integrated Virtualization Manager" but there have an error when I added a new disk to the partition. The disk already created without any issue,

Below error is to add the disk to the partition

Code:
An error occured while modifying the assignments for storage device server1-hdisk0 on your partition.  Any changes made in tabs other than Storage and Optical Devices completed successfuly.  The errors that occured are listed below. 

A virtual SCSI adapter does not exist for partition 12.

I found all of the settings tab didn't found the item related to the SCSI setting.

And I found the existing partition created by vendor, there have a "Physical Location Code" on "Hardware inventory", but my new created disk don't have. is that the point I cannot add the disk to the partition.

Thanks all support.
 
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

AIX lpar bad disk I/O performance - 4k per IO limitation ?

Hi Guys, I have fresh new installed VIO 2.2.3.70 on a p710, 3 physical SAS disks, rootvg on hdisk0 and 3 VIO clients through vscsi, AIX7.1tl4 AIX6.1tl9 RHEL6.5ppc, each lpar has its rootvg installed on a LV on datavg (hdisk2) mapped to vhost0,1,2 There is no vg on hdisk1, I use it for my... (1 Reply)
Discussion started by: frenchy59
1 Replies

2. AIX

Adding disk to my lpar

hi all i have entered Aix environment 4 months had experienced in linux what i am facing is i am unable to do sort of RnD with aix like installation on my own, creating vgs managing networks, the VIOS, storage,lpars, So we have a setup here almost all are in live production environment with... (4 Replies)
Discussion started by: vax
4 Replies

3. Solaris

Cannot remove disk added to zpool

I added a disk to a zpool using "zpool add diskname" My intention was mirror a zpool disk that no mirror; that is a zpool with only one disk. I did not issue the right command. Now, the disk has been added successfully but I cannot remove nor detach it as Solaris 11 thinks it has data on it... (14 Replies)
Discussion started by: LittleLebowski
14 Replies

4. AIX

VIOS: Extend virtual disk assigned to running lpar?

Hello, VIOS 2.2.1.4 using IVM. I'm trying to extend a virtual disk assigned to a running lpar so that I can expand the lpar's datavg and grow some filesystems for the user. Storage admin expanded the lun and new size was reflected in VIO right away. I then needed the storage pool to... (2 Replies)
Discussion started by: j_aix
2 Replies

5. AIX

VIO and LPAR disk/fcs communications

:wall::wall::wall: 1. I have created an LPAR in the HMC. 2. I have allocated the storage from an Hitachi AMS2500 and assigned it to the host group. 3. I have zoned the LPAR and Storage on a Brocade 5100. (The zone sees the AMS) Next I activated the LPAR in the HMC, SMS mode for the mksysb... (3 Replies)
Discussion started by: Dallasguy7
3 Replies

6. Red Hat

Partitioning newly added disk to Redhat

Hi Everyone, I have added new Virtual disk to OS. The main point is I need to bring this whole Disk into LVM control, is it necessary to partition the disk using fdisk command and assign partition type as '8e', or can I directly add that disk into LVM, by running pvcreate command with out... (2 Replies)
Discussion started by: bobby320
2 Replies

7. AIX

p595 LPAR no longer sees SAN boot disk

Hello, we have a wierd and urgent problem, with a few of our p595 LPARs running AIX 5.3. The LPARs ran AIX 5.3 TL 7 and booted off EMC SAN disks, using EMC Powerpath. Every boot we run "pprootdev on" and "pprootdev fix". We can issue "bosboot -a" and we can reboot the machines. Now, on two... (2 Replies)
Discussion started by: rwesterik
2 Replies

8. AIX

VIO Backing Disk LPAR how to find which one ?

hello Folks, my vio: $ lsmap -all SVSA Physloc Client Partition ID --------------- -------------------------------------------- ------------------ vhost0 U9117.MMA.6534BE4-V2-C11 0x00000003 VTD ... (0 Replies)
Discussion started by: filosophizer
0 Replies

9. AIX

Problem mapping LUN disk from VIOS to the LPAR

Hello guys, It would be so nice of you if someone can provide me with these informations. 1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Discussion started by: solaix14
3 Replies

10. AIX

LPAR and vio disk mapping

We have a frame the uses 2 vios that assign disk storage to LPAR's. We have a LPAr with multiple disk and I want to know how do I tell which vio is serving the disk. For example the LPAr has hdisk 0, 1, 2, 3 all the same size. I want to know which vio is serving hdisk0, 1. (4 Replies)
Discussion started by: daveisme
4 Replies
Login or Register to Ask a Question

LEARN ABOUT NETBSD

mbrlabel

MBRLABEL(8)						    BSD System Manager's Manual 					       MBRLABEL(8)

NAME

     mbrlabel -- update disk label from MBR label(s)

SYNOPSIS

     mbrlabel [-fqrw] [-s sector] device

DESCRIPTION

     mbrlabel is used to update a NetBSD disk label from the Master Boot Record (MBR) label(s) found on disks that were previously used on
     DOS/Windows systems (or other MBR using systems).

     mbrlabel scans the MBR contained in the very first block of the disk (or the block specified through the -s flag), then walks through every
     extended partition found and generates additional partition entries for the disk from the MBRs found in those extended partitions.

     Each MBR partition which does not have an equivalent partition in the disk label (equivalent in having the same size and offset) is added to
     the first free partition slot in the disk label.  A free partition slot is defined as one with an fstype of 'unused' and a size of zero
     ('0').  If there are not enough free slots in the disk label, a warning will be issued.

     The raw partition (typically partition c, but d on i386 and some other platforms) is left alone during this process.

     By default, the proposed changed disk label will be displayed and no disk label update will occur.

     Available options:

     -f 	Force an update, even if there has been no change.

     -q 	Performs operations in a quiet fashion.

     -r 	In conjunction with -w, also update the on-disk label.

     -s sector	Specifies the logical sector number that has to be read from the disk in order to find the MBR.  Useful if the disk has remapping
		drivers on it and the MBR is located in a non-standard place.  Defaults to 0.

     -w 	Update the in-core label if it has been changed.  See also -r.

SEE ALSO

     disklabel(8), dkctl(8), fdisk(8), mbr(8)

HISTORY

     The mbrlabel command appeared in NetBSD 1.4.

BSD
								   April 5, 2010							       BSD