Login or Register to Ask a Question and Join Our Community


AIX

San disk appearing double in old AIX

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems AIX San disk appearing double in old AIX
# 1  
Old 08-11-2014
AIX only introduced support for the DS3400, with either native AIX MPIO or the (now obsolete) RDAC driver in AIX 5.3 TL06 so I'm afraid you are out of luck unless you update something.

Checkout the SSIC site for your available options, including the firmware release of the DS that is supported:
IBM System Storage Interoperation Center (SSIC)

Please also note that the DS3400 is only capable of active / passive control so all the multipath chat above doesn't really apply to your storage subsystem, each adapter should only be able to see one storage controller and as you have a direct connection - one fcs or fscsi device can only see one controller - your connections are fine.

HTH
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

SAN vs. Local disk.

I am in the market looking to purchase a new E950 server and I am trying to decide between using local SSD drives or SSD based SAN. The application that will be running on this server is read-intensive so I am looking for the most optimal configuration to support this application. There are no... (2 Replies)
Discussion started by: ikx
2 Replies

2. AIX

SAN DISK raid level in AIX

Hello All, Our servers having emc clarion for the data disks. Is that possible to see those san disks raid level from AIX ? Am having AIX 6.1 and EMC clarion 5.5. Regards, Gowtham.G (3 Replies)
Discussion started by: gowthamakanthan
3 Replies

3. AIX

SAN Disk Appearing double in AIX

Hello Folks, I have directly connected my IBM Pseries AIX machine to SAN Storage I have a dual port Fibre Channel Adapter Connected both fiber ports to SAN Box IBM DS4500 Controller A & Controller B Using IBM DS storage manager client 10 -- created one logical disk and assigned to a... (18 Replies)
Discussion started by: filosophizer
18 Replies

4. Solaris

I/O Error on SAN Disk

Hi, I have a production solaris 10 SPARC system (portal). Yesterday legato/Networker gave an I/O Error on one of the files on its SAN mounted disk. I went to that particular file on the system, did an ls and it showed the file. However, ls -l did not work and it said IO error. ... (6 Replies)
Discussion started by: Mack1982
6 Replies

5. UNIX for Dummies Questions & Answers

SAN and Disk I/O ... do we care?

Hi all, My main function is as a DBA. Another person manages the server and the SAN. I just want to know if I should be worried about high disk I/O or is it irrelevant as the I/O "load balancing" will be "taken care" of by the SAN? For example, I have hdisk1-5 and I can see that there are... (2 Replies)
Discussion started by: newbie_01
2 Replies

6. Filesystems, Disks and Memory

SAN Disk w/o Cluster

Scenario: I've got 2 M5000's connected to a 9985 SAN storage array. I have configured the SAN disks with stmsboot, format and newfs. I can access the same SAN space from both systems. I have created files from both systems on the SAN space. Question: Why can't I see the file created... (3 Replies)
Discussion started by: bluescreen
3 Replies

7. Solaris

SAN disk failure

hi all, have a solaris 9 OS and a SAN disk which used to work fine is not getting picked up by my machine. can anyone point out things to check in order to troubleshoot this ?? thanks in advance. (3 Replies)
Discussion started by: cesarNZ
3 Replies

8. AIX

AIX 5.2/5.3 - rootvg on SAN disk - pros and cons

We are considering a DR strategy of booting AIX 5.3 and 5.3 logical partitions from EMC Symmetrix SAN disks, so that we can replicate via SRDF to a recovery site. Has anyone tried configuring AIX 5.x systems to boot from SAN disk? If so, can you provide any information on the pros and cons of... (6 Replies)
Discussion started by: jjgarrot
6 Replies

9. AIX

hard disk and san

Hello everyone I got several aix boxes with aix 5.3 I got a ibm san ds4500 My question is How can I do a match between my disks on aix and the san? I try to do a match with the LUN but for example. In my san I got several 1 LUN and on one of my aix box I got this If I type lscfg... (4 Replies)
Discussion started by: lo-lp-kl
4 Replies

10. AIX

AIX disk less with SAN

Hi All, I have mirrored SAN volume on my B80 rootvg. Can I just remove the mirror and "Remove a P V from a V G" and it will be a diskless AIX? Is that going to boot on SAN rootvg volume? Thanks in advance, itik (3 Replies)
Discussion started by: itik
3 Replies
Login or Register to Ask a Question

LEARN ABOUT HPUX

norewind_close_disabled

norewind_close_disabled(5)					File Formats Manual					norewind_close_disabled(5)

NAME

       norewind_close_disabled - determine whether access to tape device special files without the no-rewind-on-close option is allowed

VALUES

   Default
   Allowed values
DESCRIPTION

       Note: this tunable was named in releases prior to HP-UX 11i v3.

       This  tunable  notifies the tape driver whether it should allow access to device special files without the no-rewind-on-close option.  When
       this tunable is on, the tape driver will fail any open on a tape device special file that does not have the no-rewind-on-close option (that
       is, or with a status of

       The  tunable  allows  the  safe	sharing of tape devices in SAN tape backup solution configurations.  The disabling of device special files
       without no-rewind-on-close in a SAN tape backup solution configuration prevents the accidental sending of a rewind command  on  close  from
       HP-UX systems via standard tape commands like which would corrupt a backup in process.

   Who Is Expected to Change This Tunable?
       Anyone.

   Restrictions on Changing
       Changes to this tunable take effect immediately.

   When Should the Tunable Be Turned On?
       This tunable should be turned on if the system is going to be used in a SAN tape backup solution configuration.

   What Are the Side Effects of Turning the Tunable On?
       The  tape  driver  will	fail any open to a tape device special file that does not have the no-rewind-on-close option with a status of This
       behavior prevents the usage of any tape device special file without the no-rewind-on-close option.

   When Should the Tunable Be Turned Off?
       This tunable should be turned off if the system is not part of a SAN tape backup solution configuration or the  system  utilizes  will  not
       function unless it has access to device special files without the no-rewind-on-close option.

   What Are the Side Effects of Turning the Tunable Off?
       A rewind may be issued accidentally from this system on close, possibly corrupting a backup being issued from another system on the SAN.

   What Other Tunables Should Be Changed at the Same Time?
       None.

EXAMPLES

       Query the current value of the tunable:

       Set the value of the tunable to

       To save the value of the tunable across reboots:

WARNINGS

       All  HP-UX kernel tunable parameters are release specific.  This parameter may be removed or have its meaning changed in future releases of
       HP-UX.

       Installation of optional kernel software, from HP or other vendors, may cause changes to tunable  parameter  values.   After  installation,
       some  tunable  parameters may no longer be at the default or recommended values.  For information about the effects of installation on tun-
       able values, consult the documentation for the kernel software being installed.	For information about optional kernel  software  that  was
       factory installed on your system, see at

AUTHOR

       was developed by Hewlett-Packard.

SEE ALSO

       scsi_tape(7), scsimgr_estape(7).

							     Tunable Kernel Parameters					norewind_close_disabled(5)