Login or Register to Ask a Question and Join Our Community


AIX

NPIV custom WWN

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems AIX NPIV custom WWN
# 1  
Old 09-21-2012
CPU & Memory NPIV custom WWN
Hi All Smilie
i would like to know if i can customize the WWN of the new VFC (NPIV).
Or, if i must move the LPAR on another server with another FCS, i have to change the zoning??

Thanks in advance.

Mario

---------- Post updated 09-21-12 at 02:51 AM ---------- Previous update was 09-20-12 at 06:06 AM ----------

I answer myself so i can share the info with everyone:

i write a post on my website: AIX – Change WWPN of NPIV adapters - La Bottega del Sistemista

The command to change the WWPN is:

chsyscfg -r prof -m 9117-MMA*XXXXXXX -i ‘name=Nomal1,lpar_id=6,”virtual_fc_adapters=”"35/client/3/VIOSERVER-20/13/c0507602150e0016,c0507602150e0017/1″”"‘

Thanks.

Zio
This User Gave Thanks to Zio Bill For This Post:
gts1999
# 2  
Old 09-23-2012
Just remember hat when you change the WWN of the Virtual Fibre Card that you need to change any SAN zoning you have for that LPAR, and more importantly make sure that the WWN isn't in use anywhere else on your SAN.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Red Hat

Need WWN

How do I identify the WWN of associated SAN through a logical volume that is mounted on a RHEL 6 system (2 Replies)
Discussion started by: nixhead
2 Replies

2. AIX

AIX san boot from EMC2 & NPIV

Hi all , we're implementing a new NPIV infrastructure with AIX san boot on EMC2 VMAX 5876 , for economic reason , they don't wont to install Powerpath multipath sw , but only ODM drivers from EMC2 , this behavior is supported and can work?! in the past we implemented NPIV on DS8000 family... (2 Replies)
Discussion started by: BabylonRocker76
2 Replies

3. AIX

VIOS FC Mapping/NPIV questions

Please forgive me here as I don't fully understand what I am talking about here so if I use the wrong terminology please overlook me. We have multiple AIX LPARs on the managed system with two VIO Servers. A Co-Worker and I are trying to set up a new LPAR client (The guy that knows this is out)... (14 Replies)
Discussion started by: juredd1
14 Replies

4. AIX

NPIV mapping problem

Hello all I hope someone can help me with this. I have a single LPAR which is supplied a rootvg and datavg disk set from a dual VIO server configuration. I see dual path disks for all the datavg disks but only see one path for the rootvg disks. The client LPAR has the following: fcs0 ... (3 Replies)
Discussion started by: johnf
3 Replies

5. AIX

Vscsi and npiv on same adapter

Hi, I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers? Thanks, Ronald (2 Replies)
Discussion started by: ronaldm60
2 Replies

6. AIX

AIX Sanboot from EMC Symmetrix with NPIV

Hi All.. On to a new implementation with AIX 7.1 san boot from EMC disks (Using NPIV). Anyone played with this recently? Wondering if we need PowerPath on the AIX clients or has native MPIO matured to replace it. Thoughts? Thanks Mr B (6 Replies)
Discussion started by: balaji_prk
6 Replies

7. AIX

NPIV with 8Gb PCI Express Dual Port FC Adapter

All I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable: $ lsnports name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies

8. AIX

Migrating hdisks from vscsi to NPIV with powerpath

Hi All, I'm preparing to migrate some servers from vscsi to pass-thru NPIV. I am planning to have the SAN team move the exact LUNs from vio1/vio2 to those two VWWN through NPIV. My question is on the partition itself.. right now, let's say I have hdisk0/1/2/3/4 that are part of datavg. They... (2 Replies)
Discussion started by: lapfrank
2 Replies

9. AIX

Anyone using NPIV?

Is anyone here using NPIV with AIX? If you are, what type of switch are you connected to? Also, please share some impressions of NPIV over traditional port-to-port LUN assignments. We are looking to move to NPIV and need some convincing argume... I mean information. (2 Replies)
Discussion started by: kah00na
2 Replies

10. Solaris

Wwn

hiho peeps, is there a possibility to see the WWNs of your SAN-HBAs, like in ifconfig the MAC-addresse.....??? greetings Pressy (1 Reply)
Discussion started by: pressy
1 Replies
Login or Register to Ask a Question