01-26-2006
I dont see anything strange in that output:
Quote:
iostat -En
c0t6d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1711 Revision: 1005 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c1t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1RPX4
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c1t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1S42R
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
Also, my root mirror is complaining. It's posted in the original post. Anyhow, how can I be sure that 1) its a disk failure 2) which disk I need to replace.
10 More Discussions You Might Find Interesting
1. Solaris
hi all,
can someone pls pass on your suggestion?
Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'.... (3 Replies)
Discussion started by: srirammad007
3 Replies
2. Solaris
My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help.
I checked the log in /var/adm/message:
I also checked with the command iostat -nE. It returns:
Metastat returns the followings:
What should i do now?... (10 Replies)
Discussion started by: nickychung
10 Replies
3. Filesystems, Disks and Memory
I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result:
d6 is dying with iostat -nE returns Harderror 3, Transports error 9
Can some offer me some help? Thank you very much. (6 Replies)
Discussion started by: nickychung
6 Replies
4. Solaris
Hi people,
I have on problem when execute the command METASTAT...
d60: Soft Partition
Device: d10
State: Errored
Size: 12582912 blocks (6.0 GB)
Someone help me?
Thank you very much (4 Replies)
Discussion started by: denisgomes
4 Replies
5. Solaris
Hi All,
Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute!
I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks.
Now everything is working fine and we've had no downtime or... (4 Replies)
Discussion started by: TheSteed
4 Replies
6. Solaris
Hi friends,
I'm newbie to SVM.
Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :(
the steps i've taken is as below:-
1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
2.metadb -a -c 3 -f c1t0d0s7... (3 Replies)
Discussion started by: kronenose
3 Replies
7. Solaris
Greetings
How can i restore metastat db after a solaris upgrade (9 to 10)?
will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file?
root@netad# metastat
d35: Mirror
Submirror 0: d38
State: Okay
Submirror 1: d39
State: Okay
Pass:... (2 Replies)
Discussion started by: kashif_islam
2 Replies
8. Shell Programming and Scripting
Hi,
after issuing metastat command I am getting output as follows
Actually these soft partitions are more than 100.
I want output as Device Name & Size.
for eg d4004 2.0 GB (4 Replies)
Discussion started by: tuxian
4 Replies
9. Solaris
Dear,
Required an script such that :
If metastat |grep Needs , results in some output then this command to be executed for the same :
opcmsg object=metastat a=OS msg_grp=OpC severity=critical msg_text="Need maintenance for the system $line"
With regards,
Mjoshi (3 Replies)
Discussion started by: mjoshi87
3 Replies
10. Solaris
Hi,
We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level... (6 Replies)
Discussion started by: prvnrk
6 Replies
LEARN ABOUT HPUX
diskinfo
diskinfo(1M) diskinfo(1M)
NAME
diskinfo - describe characteristics of a disk device
SYNOPSIS
character_devicefile
DESCRIPTION
The command determines whether the character special file named by character_devicefile is associated with a SCSI or floppy disk drive. If
so, summarizes the disk's characteristics.
The command displays information about the following characteristics of disk drives:
Vendor name Manufacturer of the drive (SCSI only)
Product ID Product identification number or ASCII name
Type Floppy or SCSI classification for the device
Disk Size of disk specified in bytes
Sector Specified as bytes per sector
Both the size of disk and bytes per sector represent formatted media.
Options
The command recognizes the following options:
Return the size of the disk in 1024-byte sectors.
Display a verbose summary of all of the information
available from the device. For floppy drives, this option has no effect.
SCSI disk devices return the following:
Vendor and product ID
Device type
Size (in bytes and in logical blocks)
Bytes per sector
Revision level
SCSI conformance level data
DIAGNOSTICS
Most of the diagnostic messages from are self-explanatory. However, one diagnostic message deserves further clarification. If the command
fails to access the lunpath corresponding to a given special file, it displays the following diagnostics data, which contains device iden-
tification and capability information:
device type 127 (unknown); device is inaccessible
iso ecma ansi rmb dtq resv rdf
WARNINGS
As of release 10.20 of HP-UX, certain IDE devices, CD-ROMs in particular, will respond to inquiries as if they were SCSI devices. There-
fore, the text "SCSI describe" in the output of the command does not definitively mean that the disk is in fact a SCSI drive (especially in
the case of CD-ROMs). Use to check which type of INTERFACE node, SCSI or IDE, the device's hardware path lies beneath, in order to defini-
tively determine a drive's interface.
DEPENDENCIES
General
The command supports floppy and HP SCSI disk devices.
SCSI Devices
The SCSI specification provides for a wide variety of device-dependent formats. For non-HP devices, may be unable to interpret all of the
data returned by the device. Refer to the drive operating manual accompanying the unit for more information.
AUTHOR
was developed by HP.
SEE ALSO
ioscan(1M), lsdev(1M), disktab(4), disk(7).
diskinfo(1M)