01-26-2006
I dont see anything strange in that output:
Quote:
iostat -En
c0t6d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1711 Revision: 1005 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c1t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1RPX4
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c1t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1S42R
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
Also, my root mirror is complaining. It's posted in the original post. Anyhow, how can I be sure that 1) its a disk failure 2) which disk I need to replace.
10 More Discussions You Might Find Interesting
1. Solaris
hi all,
can someone pls pass on your suggestion?
Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'.... (3 Replies)
Discussion started by: srirammad007
3 Replies
2. Solaris
My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help.
I checked the log in /var/adm/message:
I also checked with the command iostat -nE. It returns:
Metastat returns the followings:
What should i do now?... (10 Replies)
Discussion started by: nickychung
10 Replies
3. Filesystems, Disks and Memory
I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result:
d6 is dying with iostat -nE returns Harderror 3, Transports error 9
Can some offer me some help? Thank you very much. (6 Replies)
Discussion started by: nickychung
6 Replies
4. Solaris
Hi people,
I have on problem when execute the command METASTAT...
d60: Soft Partition
Device: d10
State: Errored
Size: 12582912 blocks (6.0 GB)
Someone help me?
Thank you very much (4 Replies)
Discussion started by: denisgomes
4 Replies
5. Solaris
Hi All,
Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute!
I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks.
Now everything is working fine and we've had no downtime or... (4 Replies)
Discussion started by: TheSteed
4 Replies
6. Solaris
Hi friends,
I'm newbie to SVM.
Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :(
the steps i've taken is as below:-
1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
2.metadb -a -c 3 -f c1t0d0s7... (3 Replies)
Discussion started by: kronenose
3 Replies
7. Solaris
Greetings
How can i restore metastat db after a solaris upgrade (9 to 10)?
will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file?
root@netad# metastat
d35: Mirror
Submirror 0: d38
State: Okay
Submirror 1: d39
State: Okay
Pass:... (2 Replies)
Discussion started by: kashif_islam
2 Replies
8. Shell Programming and Scripting
Hi,
after issuing metastat command I am getting output as follows
Actually these soft partitions are more than 100.
I want output as Device Name & Size.
for eg d4004 2.0 GB (4 Replies)
Discussion started by: tuxian
4 Replies
9. Solaris
Dear,
Required an script such that :
If metastat |grep Needs , results in some output then this command to be executed for the same :
opcmsg object=metastat a=OS msg_grp=OpC severity=critical msg_text="Need maintenance for the system $line"
With regards,
Mjoshi (3 Replies)
Discussion started by: mjoshi87
3 Replies
10. Solaris
Hi,
We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level... (6 Replies)
Discussion started by: prvnrk
6 Replies
LEARN ABOUT DEBIAN
msvmocas
MSVMOCAS(1) General Commands Manual MSVMOCAS(1)
NAME
msvmocas - train a multi-class linear SVM classifier
SYNOPSIS
msvmocas [options] example_file model_file
DESCRIPTION
msvmocas is a program that trains a multi-class linear SVM classifier using the Optimized Cutting Plane Algorithm for Support Vector
Machines (OCAS) and produces a model file.
example_file is a file with training examples in SVM^light format, and model_file is the file in which to store the learned linear rule
f(x)=W'*x. model_file contains M columns and D lines, where M is the number of classes and D the number of dimensions, corresponding to the
elements of the matrix W [D x M].
OPTIONS
A summary of options is included below.
General options:
-h Show summary of options.
-v (0|1)
Set the verbosity level (default: 1)
Learning options:
-c float
Regularization constant C. (default: 1)
-n integer
Use only the first integer examples for training. By default, integer equals the number of examples in example_file.
Optimization options:
-m (0|1)
Solver to be used:
0 ... standard cutting plane (equivalent to BMRM, SVM^perf)
1 ... OCAS (default)
-s integer
Cache size for cutting planes. (default: 2000)
Stopping conditions:
-a float
Absolute tolerance TolAbs: halt if QP-QD <= TolAbs. (default: 0)
-r float
Relative tolerance TolAbs: halt if QP-QD <= abs(QP)*TolRel. (default: 0.01)
-q float
Desired objective value QPValue: halt is QP <= QPValue. (default: 0)
-t float
Halts if the solver time (loading time is not counted) exceeds the time given in seconds. (default: infinity)
EXAMPLES
Train the multi-class SVM classifier from example file example4_train.light, with the regularization constant C=10, verbosity switched off,
and save model to msvmocas.model:
msvmocas -c 10 -v 0 example4_train.light msvmocas.model
Compute the testing error of the classifier stored in msvmocas.model with linclass(1) using testing examples from example4_test.light and
save the predicted labels to example4_test.pred:
linclass -e -o example4_test.pred example4_test.light msvmocas.model
SEE ALSO
svmocas(1), linclass(1).
AUTHORS
msvmocas was written by Vojtech Franc <xfrancv@cmp.felk.cvut.cz> and Soeren Sonnenburg <Soeren.Sonnenburg@tu-berlin.de>.
This manual page was written by Christian Kastner <debian@kvr.at>, for the Debian project (and may be used by others).
June 16, 2010 MSVMOCAS(1)