SVM metastat -- needs maintenance Post: 97140

Sponsored Content

Operating Systems Solaris SVM metastat -- needs maintenance Post 97140 by dangral on Thursday 26th of January 2006 02:50:19 PM

01-26-2006

Registered User

I dont see anything strange in that output:

Quote:

iostat -En
c0t6d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1711 Revision: 1005 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c1t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1RPX4
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c1t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1S42R
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0

Also, my root mirror is complaining. It's posted in the original post. Anyhow, how can I be sure that 1) its a disk failure 2) which disk I need to replace.

dangral

View Public Profile for dangral

Find all posts by dangral

10 More Discussions You Might Find Interesting

1. Solaris

Help on metastat

hi all, can someone pls pass on your suggestion? Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'....

2. Solaris

SVM - metastat - Last Erred

My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help. I checked the log in /var/adm/message: I also checked with the command iostat -nE. It returns: Metastat returns the followings: What should i do now?...

3. Filesystems, Disks and Memory

What should I do with this metastat result? metareplace everything?

I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result: d6 is dying with iostat -nE returns Harderror 3, Transports error 9 Can some offer me some help? Thank you very much.

4. Solaris

Softpartition State: Errored in Command MetaStat

Hi people, I have on problem when execute the command METASTAT... d60: Soft Partition Device: d10 State: Errored Size: 12582912 blocks (6.0 GB) Someone help me? Thank you very much

5. Solaris

Metastat shows "maintenance" and "last-erred"

Hi All, Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute! I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks. Now everything is working fine and we've had no downtime or...

6. Solaris

SVM Solaris 8 Problem. Metastat output looping

Hi friends, I'm newbie to SVM. Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :( the steps i've taken is as below:- 1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2 2.metadb -a -c 3 -f c1t0d0s7...

7. Solaris

restore metastat configuration after solaris upgrade

Greetings How can i restore metastat db after a solaris upgrade (9 to 10)? will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file? root@netad# metastat d35: Mirror Submirror 0: d38 State: Okay Submirror 1: d39 State: Okay Pass:...

8. Shell Programming and Scripting

Grep contents from metastat command

Hi, after issuing metastat command I am getting output as follows Actually these soft partitions are more than 100. I want output as Device Name & Size. for eg d4004 2.0 GB

9. Solaris

metastat |grep Needs

Dear, Required an script such that : If metastat |grep Needs , results in some output then this command to be executed for the same : opcmsg object=metastat a=OS msg_grp=OpC severity=critical msg_text="Need maintenance for the system $line" With regards, Mjoshi

10. Solaris

Metastat shows state needs maintenance

Hi, We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level...

LEARN ABOUT HPUX

create_sysfile

create_sysfile(1M)														create_sysfile(1M)

NAME

       create_sysfile - create a kernel system file

SYNOPSIS

       [outfile]

DESCRIPTION

       The command creates a kernel configuration description file (system file) which can be used as input to the commands kconfig(1M) or mk_ker-
       nel(1M).  The system file that is generated is of type version 1 (see system(4)) and is built according to the drivers required by the cur-
       rent system hardware.  This command is intended for use during the install process when the system does not have a system file.

       The  command uses the ioscan(1M) command to scan the system hardware and adds all drivers it can identify to run the existing hardware.	If
       outfile is specified, the resulting system file is sent to outfile.  If outfile is not specified, the output is placed in the file

RETURN VALUE

       Upon completion, returns with one of the following exit values:

	      0      Successful.

	      1      One or more errors were reported.

DIAGNOSTICS

       Errors are sent to stderr.  Most of the diagnostic messages from are self-explanatory.  Errors cause to halt immediately.

WARNINGS

       is obsolete and will be removed in a future version of HP-UX.

AUTHOR

       was developed by HP.

SEE ALSO

       ioscan(1M), kconfig(1M), mk_kernel(1M), system(4), kconfig(5).

																create_sysfile(1M)