eucset(1)						      General Commands Manual							 eucset(1)

NAME

       eucset - Sets and gets EUC code widths for the terminal

SYNOPSIS

       eucset [cswidth]

       eucset -p

OPTIONS

       Displays the current settings of the EUC character widths for the terminal

DESCRIPTION

       The  eucset  command sets or gets the encoding and display widths of the Extended UNIX Code (EUC) characters processed by the current input
       terminal. EUC is an encoding method for code sets composed of single or multiple bytes. It permits applications and the	terminal  hardware
       to use the 7-bit US ASCII code and up to three single- or multibyte code sets simultaneously.

       If  you	use  the  eucset  command  to  set EUC character widths, but do not specify the cswidth argument, 7-bit U.S. ASCII is applied as a
       default code set. You must use the command to specify any other EUC code sets, whether they are single-byte or multibyte.

   EUC Code Set Classes
       EUC divides code sets into four classes. Each code set class has two characteristics: the number of bytes for encoding  the  characters	in
       the  class, and the number of display columns to display the characters in the class.  All characters within a class possess the same char-
       acteristics.

       Class 0 consists of all 7-bit, single-byte ASCII characters.  The most-significant bit of each of these characters is 0 (zero).	Characters
       in  class  0  require  one byte for encoding, and occupy one display column.  These values are fixed for class 0 (zero). The 7-bit US ASCII
       code is the primary EUC code set, which is available to users without direct specification.

       A class 1 code set is a supplementary EUC code set. Class 1 characters have an initial byte whose most-significant bit is 1.  If  character
       classes 2 or 3 are to be used, this initial byte must not be the SS2 or SS3 character, as these designate character classes 2 and 3.  Char-
       acters in class 1 may require more than 1 byte for encoding, and may require more than 1 display column.  The eucset command must  be  used
       to set the characteristics for code set class 1.

       Class  2  and  3  code  sets are supplementary EUC code sets. Characters in these classes have an initial byte of SS2 or SS3, respectively.
       They require more than 1 byte for encoding, and may require more than 1 display column.	The eucset command must be used to set the charac-
       teristics for code set classes 2 and 3.

       The cswidth argument in the eucset command line is a character string that describes the character widths for code set classes 1 through 3.
       The string is of the following format: X1[:Y1], X2[:Y2], X3[:Y3]

       The value X1 is the number of bytes required to encode a character in code set class 1.	Y1 is the number of display columns needed to dis-
       play  characters  in  this class.  X2 is the number of bytes required to encode a character in code set class 2, not counting the SS2 byte,
       and Y2 is the number of display columns for code set class 2 characters.  X3 is the number of bytes needed to encode characters in code set
       class 3, not counting the SS3 byte, and Y3 is the number of display columns required for these characters. The values for the column widths
       can be omitted if they are equal to the number of encoding bytes. If the encoding value of any of the EUC code sets is  set  to	0  (zero),
       this indicates that the code set does not exist.

       If no cswidth argument is supplied, the eucset command uses the value of the CSWIDTH environment variable. If this variable is not present,
       the default string 1:1,0:0,0:0 is substituted. This default string designates that the environment uses a single-byte EUC code set that has
       characters  in the EUC code set class 1 format. If the environment uses a multibyte EUC code set in the code set class 1 format, single- or
       multibyte EUC code sets in the code set class 2 or 3 format, or both, the default setting cannot be used.

DIAGNOSTICS

       Your standard input is not an interactive terminal.  The maximum character width of 8 was exceeded.

EXAMPLES

       To display the encoding and display widths for the EUC code set classes 1-3 in your environment, enter: eucset -p  To  change  the  current
       settings of the encoding and display widths for the EUC characters in code set classes 1 and 2 to 2 bytes each, enter: eucset 2:2,2:2,0:0

	      or eucset 2,2,0

SEE ALSO

       Interfaces:  eucioctl(7)

																	 eucset(1)