01-04-2006
Hi Friend
Quote:
I did not find the first site on the lists. The second site is a stratum 1. I would just use the second entry. If you use multiple servers, you need at least 3. Two servers does not work very well.
which site are you talking about ? I am able so get response from all the websites/links/ip adresses given here.
See below ===
Quote:
C:\Documents and Settings\csaha>ping billthecat.sdsc.edu
Pinging billthecat.sdsc.edu [132.249.20.60] with 32 bytes of data:
Reply from 132.249.20.60: bytes=32 time=315ms TTL=232
Reply from 132.249.20.60: bytes=32 time=306ms TTL=232
Reply from 132.249.20.60: bytes=32 time=332ms TTL=232
Reply from 132.249.20.60: bytes=32 time=319ms TTL=232
Ping statistics for 132.249.20.60:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 306ms, Maximum = 332ms, Average = 318ms
C:\Documents and Settings\csaha>ping clock.isc.org
Pinging clock.isc.org [204.152.184.72] with 32 bytes of data:
Reply from 204.152.184.72: bytes=32 time=312ms TTL=42
Reply from 204.152.184.72: bytes=32 time=304ms TTL=42
Reply from 204.152.184.72: bytes=32 time=304ms TTL=42
Reply from 204.152.184.72: bytes=32 time=301ms TTL=42
Ping statistics for 204.152.184.72:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 301ms, Maximum = 312ms, Average = 305ms
5 More Discussions You Might Find Interesting
1. HP-UX
Hello,
I'm looking for assitance on setting up network time protocol on my HP-ux boxes.
I have edit the .conf file accordingly. And /etc/services. But whenever I try and start the service nothing happens at all. No error message, nothing.
I have a SCO box as a time server and I wish... (0 Replies)
Discussion started by: satinet
0 Replies
2. AIX
How to check the ntpd version of AIX 5.3 ? (3 Replies)
Discussion started by: alanlkw
3 Replies
3. Shell Programming and Scripting
I need to replace the line daemon ntpd $OPTIONS in the following script with daemon ntpd $OPTIONS 2>&1 > /var/log/ntpd.log &
what will happen?
The idea of replacing is to capture the output on the console into ntpd.log file.
Will this work?
... (1 Reply)
Discussion started by: naive1977
1 Replies
4. Red Hat
as advised and documented, i'm trying to use the ntpd -gq instead of ntpdate. The result is that clock not set. as below. However ntpdate is working ok and had set the clock correctly
this is the ntp.conf file:
# cat /etc/ntp.conf
logfile /var/log/ntp.log
driftfile /var/lib/ntp/drift... (6 Replies)
Discussion started by: ahmad.zuhd
6 Replies
5. Debian
on every boot, ntpd takes long time to start (after moving from dhcp to static ip). is there a way to speed it up? (1 Reply)
Discussion started by: orange47
1 Replies
LEARN ABOUT DEBIAN
chrony
CHRONY(1) User's Manual CHRONY(1)
NAME
chrony - programs for keeping computer clocks accurate
SYNOPSIS
chronyc [OPTIONS]
chronyd [OPTIONS]
DESCRIPTION
chrony is a pair of programs for keeping computer clocks accurate. chronyd is a background (daemon) program and chronyc is a command-line
interface to it. Time reference sources for chronyd can be RFC1305 NTP servers, human (via keyboard and chronyc), or the computer's real-
time clock at boot time (Linux only). chronyd can determine the rate at which the computer gains or loses time and compensate for it while
no external reference is present. Its use of NTP servers can be switched on and off (through chronyc) to support computers with dial-
up/intermittent access to the Internet, and it can also act as an RFC1305-compatible NTP server.
USAGE
chronyc is a command-line interface program which can be used to monitor chronyd's performance and to change various operating parameters
whilst it is running.
chronyd's main function is to obtain measurements of the true (UTC) time from one of several sources, and correct the system clock accord-
ingly. It also works out the rate at which the system clock gains or loses time and uses this information to keep it accurate between mea-
surements from the reference.
The reference time can be derived from either Network Time Protocol (NTP) servers, reference clocks, or wristwatch-and-keyboard (via
chronyc). The main source of information about the Network Time Protocol is http://www.eecis.udel.edu/~ntp.
It is designed so that it can work on computers which only have intermittent access to reference sources, for example computers which use a
dial-up account to access the Internet. Of course, it will work on computers with permanent connections too.
In addition, for Linux 2.0.x (for x >= 32) or 2.2 onwards, chronyd can monitor the system's real time clock performance, so the system can
maintain accurate time even across reboots.
Typical accuracies available between 2 machines are
On an ethernet LAN : 100-200 microseconds, often much better On a V32bis dial-up modem connection : 10's of milliseconds (from one session
to the next)
With a good reference clock the accuracy can reach one microsecond.
chronyd can also operate as an RFC1305-compatible NTP server and peer.
SEE ALSO
chronyc(1), chrony(1)
http://chrony.tuxfamily.org/
AUTHOR
Richard Curnow <rc@rc0.org.uk>
This man-page was written by Jan Schaumann <jschauma@netmeister.org> as part of "The Missing Man Pages Project". Please see
http://www.netmeister.org/misc/m2p2/index.html for details.
The complete chrony documentation is supplied in texinfo format.
chrony December 04, 2009 CHRONY(1)