05-18-2003
no, if you have DHCP enabled then you can NOT use addresses in the range of 192.168.1.100/255 , in addition, with DHCP disabled you still can not use 192.168.1.255 because that address is reserved. the address you have assigned (192.168.1.21) is fine. so for example, you said that you want to allow ssh connections to 192.168.1.21 from out side of your LAN. you would do this with port forwording, you set up on the router to forword port 22 to 192.168.1.21. then to access your ssh server from out side of your lan all you have to do is connect using your external ip address (what your isp assigns). you can also set up DNS with
www.no-ip.com like you said.
10 More Discussions You Might Find Interesting
1. Programming
What does this command exactly do
cc -static example.c (6 Replies)
Discussion started by: wojtyla
6 Replies
2. IP Networking
Hi,
I have a machine that sits on 10.2 network.
I need to ssh from this to another box that is on both 10.125 & 10.140 VLANs
what should I need to do?
Thanks! (3 Replies)
Discussion started by: chaandana
3 Replies
3. UNIX for Dummies Questions & Answers
Hi,
Request you to please tell me the command or the process to add the static route in redhat linux.
Thanks in Advance.
Regards
Arun (2 Replies)
Discussion started by: Arun.Kakarla
2 Replies
4. Shell Programming and Scripting
Hi all,
Sorry I make a mistake,the title should be "How to statistic the average value "
I do five times about "mv 123 to 456"
and do five times about "mv 456 to 123"
As we know,"time" can get the real usr sys value,
I want to get the average real,usr,sys of "mv 123 to 456" and "mv 456 to... (4 Replies)
Discussion started by: yanglei_fage
4 Replies
5. IP Networking
hello, i need help on setting my coyote linux, i've working on this for last 5 days, can't get it to work. I've been posting this message to coyote forum, and other linux forum, but haven't get any answer yet. Hope someone here can help me...... please see my attached picture first.
... (0 Replies)
Discussion started by: dlwoaud
0 Replies
6. Linux
I have some static library(libxxx.a libyyy.a).
And I want to generate my library(libzzz.a), libzzz.a will use libxxx.a and libyyy.a
I wan't my application only use libzzz.a, (means libzzz.a had include libxxx.a, libyyy.a), how can I do that? Thank you.
example:
I have zzz.c.
I do ... (4 Replies)
Discussion started by: freemagic
4 Replies
7. UNIX for Dummies Questions & Answers
Hey guys ,
YEs this is probably silly for most but i am new to this forum and solaris . i am curious to know if the ip address we have for our solaris server is static or dhcp . how can i tell ? will ifconfig -a tell me this ? or other commands?
Thanks in advance (1 Reply)
Discussion started by: xdrivex
1 Replies
8. Programming
I'm writing a program which uses curl to be run on Linux PCs which will be used by a number of different users. I cannot make the users all install curl on their individual machines, so I have tried to link curl in statically, rather than using libcurl.so. I downloaded the source and created a... (8 Replies)
Discussion started by: BrandonShw
8 Replies
9. Programming
Are the following equivalent?
static int df, dl, du, count;
static int df;
static int dl;
static int du;
static int count; (7 Replies)
Discussion started by: kristinu
7 Replies
10. Solaris
Hi,
Here is what I get within Solaris.
huamin@SOL11I:~$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
net0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask... (24 Replies)
Discussion started by: HuaMin
24 Replies
VRRPD(8) Vrrpd's Manual VRRPD(8)
NAME
vrrpd - Virtual Router Redundancy Protocol Deamon
SYNOPSIS
vrrpd -i ifname -v vrid [-f piddir] [-s] [-a auth] [-p prio] [-m ifname] [-c delta] [-nhD] ipaddr
DESCRIPTION
vrrpd is an implementation of VRRPv2 as specified in rfc2338. It run in userspace for linux. In short, VRRP is a protocol which elects a
master server on a LAN and the master answers to a 'virtual ip address'. If it fails, a backup server takes over the ip address.
A longer answer in the rfc2338 abstract : "This memo defines the Virtual Router Redundancy Protocol (VRRP). VRRP specifies an election
protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN. The VRRP router controlling the
IP address(es) associated with a virtual router is called the Master, and forwards packets sent to these IP addresses. The election
process provides dynamic fail over in the forwarding responsibility should the Master become unavailable. This allows any of the virtual
router IP addresses on the LAN to be used as the default first hop router by end-hosts. The advantage gained from using VRRP is a higher
availability default path without requiring configuration of dynamic routing or router discovery protocols on every end-host." Copyright
(C) The Internet Society (1998). All Rights Reserved.
Monitored interface functionality is useful on high availability router or firewall platforms, where single interface failure can cause
asymmetrical routing issues.
Ideally, what is required is a method for a vrrpd process to detect a failure of the 'other' network interface, and lower it's own VRRP
priority below that of the 'backup' vrrpd process. This allows failover to occur normally.
OPTIONS
-h display this short inlined help
-n Don't handle the virtual mac address
-D Go into background mode, daemonize
-i ifname
the interface name to run on. More than one interface can be monitored by the one vrrpd process, a list like "eth1 eth2 eth3 eth4
eth5" is acceptable. Losing link-beat on any of these will cause the priority of that vrrpd process to be decreased by the specified
value, or a default of 100. Note that as MII calls are used, this implementation is limited to Fast and Gigabit Ethernet chipsets
only - 10Mbps Ethernet cards will not work.
-v vrid
the id of the virtual server [1-255]
-s iqxSwitch the preemption mode (Enabled by default)
-a auth
set the authentification type auth=(none|pw/hexkey|ah/hexkey) hexkey=0x[0-9a-fA-F]+ Password is a symbolic security, anybody with a
sniffer can break it. AH is a bit stronger.
-p prio
Set the priority of this host in the virtual server (dfl: 100)
-f piddir
specify the directory where the pid file is stored (dfl: /var/run)
-d delay
Set the advertisement interval (in sec) (dfl: 1) -m ifname Interface(s) to monitor for failure. Use " " for multiple interfaces
-c delta
Set the delta to decrease priority by (dfl: 50)
ipaddr the ip address(es) of the virtual server
EXAMPLES
vrrpd -i eth0 -v 50 10.0.0.1
run vrrp on the interface eth0 with the virtual id 50 and 10.0.0.1 as virtual ip address
AUTHOR
vrrpd was written by Jerome Etienne <jetienne@arobas.net>, it was later improved by Alexandre Cassert <acassen@linux-vs.org> and David
Hunter <david.hunter@gen-i.co.nz>
BUGS
Suggestions, bugs or questions should be directed to the Sourceforge project at http://sourceforge.net/projects/vrrpd/
Bug reports regarding this package should be submitted to Debian using the reportbug or bug tool.
MORE INFO
For more information please read the documents under /usr/share/doc/vrrpd/ : README, README.Debian FAQ and TODO.
vrrpd(8) December 2002 VRRPD(8)