Hi Rudie,
Thank you very much it is working as expected , got some additional requirement on top of it.
1. records should be picked only for the movement code 26 as mentioned in top of every record header ,can be hard coded.
2. addition column only 2 digits needs to display from DOC NO so as per below record 39,36,11,11
3. To display DDMM colmmn also but with year in file records only date and month i.e 05 date and month 12 but year also needs be appended.
year logic is to read from the file name.
file name = R950CMA_01JAN15 so data is for the past month means dec14 so year is 14 in a same way go on..
Final output is expected as below.
---------- Post updated at 06:57 AM ---------- Previous update was at 01:55 AM ----------
All,
I have a task to search through several hundred files and extract duplicate detail records and keep them grouped with their header record. If no duplicate detail record exists, don't pull the header. For example, an input file could look like this:
input.txt
HA
D1
D2
D2
D3
D4
D4... (17 Replies)
Hello All,
I have a file in the following format. I want to extract the date(020090930, 020090929) in the string "STPAGE020090930" and "STPAGE020090929" and prefix it to all lines below them. The output must be put into a new file.
STPAGE020090930
xyzz aalc... (3 Replies)
hi,
I want to extract and save the cpu(s) information from top command output, but individual cpu statistics separately on a multi-processor machine.
In command line, top will show this statistics when we press the switch "1".
any ideas?
thanks,
meharo (3 Replies)
Hi Folks,
I've searched for this for quite a while, but can't find any solution - hope someone can help.
I have various files with standard headers. eg.
<HEADER>
IP: 1.2.3.4
Username: Joe
Time: 12:00:00
Date: 23/05/2010
</HEADER>
This
is
a
test
and this part can be any size... (6 Replies)
Hi,
I'm having trouble pulling out columns where the headers match a file of key ID's I'm interested in and was looking for some help.
file1.txt
I
Name
34
56
84
350
790
1215
1919
7606
9420
file2.txt
I Name 1 1 2 2 3 3 ... 34 34... 56 56... 84 84... 350 350...
M 1 A A A A... (20 Replies)
Friends,
I need help with the following in UNIX.
Merge all csv files in one folder considering only 1 header row and ignoring header of all other files.
FYI - All files are in same format and contains same headers.
Thank you (4 Replies)
Hi to all,
I have two files. File1 has no header, two columns:
sample1 A
sample2 B
sample3 B
sample4 C
sample5 A
sample6 D
sample7 D
File2 has a header, except for the first 3 columns (chr,start,end). "sample1" is the header for the 4th ,5th ,6th columns, "sample2" is the header... (4 Replies)
I have a csv which has lot of columns . I was looking for an awk script which would extract a column twice. for the first occurance the header and data needs to be intact but for the second occurance i want to replace the header name since it a duplicate and extract year value which is in ddmmyy... (10 Replies)
I've been struggling with this one for quite a while and cannot seem to find a solution for this find/replace scenario. Perhaps I'm getting rusty.
I have a file that contains a number of metrics (exactly 3 fields per line) from a few appliances that are collected in parallel. To identify the... (3 Replies)
Discussion started by: verdepollo
3 Replies
LEARN ABOUT SUSE
tracker-extract
tracker-extract(1) User Commands tracker-extract(1)NAME
tracker-extract - Extract metadata from a file.
SYNOPSYS
tracker-extract [OPTION...] FILE...
DESCRIPTION
tracker-extract reads the file and mimetype provided in stdin and extract the metadata from this file; then it displays the metadata on the
standard output.
NOTE: If a FILE is not provided then tracker-extract will run for 30 seconds waiting for DBus calls before quitting.
OPTIONS
-?, --help
Show summary of options.
-v, --verbosity=N
Set verbosity to N. This overrides the config value. Values include 0=errors, 1=minimal, 2=detailed and 3=debug.
-f, --file=FILE
The FILE to extract metadata from. The FILE argument can be either a local path or a URI. It also does not have to be an absolute
path.
-m, --mime=MIME
The MIME type to use for the file. If one is not provided, it will be guessed automatically.
-d, --disable-shutdown
Disable shutting down after 30 seconds of inactivity.
-i, --force-internal-extractors
Use this option to force internal extractors over 3rd parties like libstreamanalyzer.
-m, --force-module=MODULE
Force a particular module to be used. This is here as a convenience for developers wanting to test their MODULE file. Only the MOD-
ULE name has to be specified, not the full path. Typically, a MODULE is installed to /usr/lib/tracker-0.7/extract-modules/. This
option can be used with or without the .so part of the name too, for example, you can use --force-module=foo
Modules are shared objects which are dynamically loaded at run time. These files must have the .so suffix to be loaded and must con-
tain the correct symbols to be authenticated by tracker-extract. For more information see the libtracker-extract reference documen-
tation.
-V, --version
Show binary version.
EXAMPLES
Using command line to extract metadata from a file:
$ tracker-extract -v 3 -f /path/to/some/file.mp3
Using a specific module to extract metadata from a file:
$ tracker-extract -v 3 -f /path/to/some/file.mp3 -m mymodule
ENVIRONMENT
TRACKER_EXTRACTORS_DIR
This is the directory which tracker uses to load the shared libraries from (used for extracting metadata for specific file types).
These are needed on each invocation of tracker-store. If unset it will default to the correct place. This is used mainly for testing
purposes.
FILES
$HOME/.config/tracker/tracker-extract.cfg
SEE ALSO tracker-store(1), tracker-sparql(1), tracker-stats(1), tracker-info(1).
tracker-extract.cfg(5).
/usr/lib/tracker-0.7/extract-modules/
GNU July 2007 tracker-extract(1)