Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Where are my other disks on T5220 ?
Operating Systems Solaris Where are my other disks on T5220 ? Post 302987783 by solaris_1977 on Thursday 15th of December 2016 06:01:55 PM
Old 12-15-2016
Where are my other disks on T5220 ?
Hi,
I got a (used) server to install Solaris 11 and wipe out every information on existing disks. There are 6 disks of 300GB and two disks of 146GB. I am not able to figure out, how to find out RAID (if there is any) and break it. Can anybody help me with that ? Below is configuration. I have installed OS on c2t0d0.

HTML Code:
root@predb-dev2:~# echo|format
Searching for disks...done
 
AVAILABLE DISK SELECTIONS:
       0. c2t0d0 <Sun-STKRAIDINT-V1.0 cyl 17831 alt 2 hd 255 sec 63>
          /pci@0/pci@0/pci@9/scsi@0/disk@0,0
       1. c2t1d0 <Sun-STKRAIDINT-V1.0 cyl 36417 alt 2 hd 255 sec 63>
          /pci@0/pci@0/pci@9/scsi@0/disk@1,0
Specify disk (enter its number): Specify disk (enter its number):
root@predb-dev2:~#
root@predb-dev2:~# iostat -En
c2t1d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: Sun      Product: STK RAID INT     Revision: V1.0 Serial No: E0A48F26
Size: 299.56GB <299562434560 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0 Non-Aligned Writes: 0
c2t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: Sun      Product: STK RAID INT     Revision: V1.0 Serial No: 13187F26
Size: 146.68GB <146684248064 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0 Non-Aligned Writes: 0
c1t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: TSSTcorp Product: CD/DVDW TS-T632A Revision: SR03 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 6 Predictive Failure Analysis: 0 Non-Aligned Writes: 0
root@predb-dev2:~#
root@predb-dev2:~# raidctl
Controller: 3
root@predb-dev2:~#
root@predb-dev2:~# raidctl -l 3
Controller      Type            Version
----------------------------------------------------------------
c3              LSI_1068E       1.22.00.00
root@predb-dev2:~# 
root@predb-dev2:~# cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
c2                             scsi-bus     connected    configured   unknown
c2::dsk/c2t0d0                 disk         connected    configured   unknown
c2::dsk/c2t1d0                 disk         connected    configured   unknown
c3                             scsi-sas     connected    unconfigured unknown
usb0/1                         unknown      empty        unconfigured ok
usb0/2                         unknown      empty        unconfigured ok
usb0/3                         unknown      empty        unconfigured ok
usb1/1                         unknown      empty        unconfigured ok
usb1/2                         unknown      empty        unconfigured ok
usb2/1                         unknown      empty        unconfigured ok
usb2/2                         usb-storage  connected    configured   ok
usb2/3                         unknown      empty        unconfigured ok
usb2/4                         usb-hub      connected    configured   ok
usb2/4.1                       unknown      empty        unconfigured ok
usb2/4.2                       unknown      empty        unconfigured ok
usb2/4.3                       unknown      empty        unconfigured ok
usb2/4.4                       unknown      empty        unconfigured ok
usb2/5                         unknown      empty        unconfigured ok
root@predb-dev2:~#
Last edited by solaris_1977; 12-15-2016 at 07:39 PM..
 

10 More Discussions You Might Find Interesting

1. Solaris

kstat on T5220

We used kstat on netra240/440 to check if the link is full duplex. So we do something like: bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2 2 The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems. However, the nxge... (2 Replies)
Discussion started by: illcar
2 Replies

2. Solaris

ILOM and sc on T5220

I 've 2 different T5220 and both are showing different prompts when i ssh to the console. 1. Shows sc> ALOM 2. Shows -> ILOM as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ? and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies

3. Solaris

SC on T5220 not responding

Hi, SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc sc> console -f Enter #. to return to ALOM. (2 Replies)
Discussion started by: fugitive
2 Replies

4. Solaris

LDOMs on T5220

We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid? I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Discussion started by: JerryHone
9 Replies

5. Solaris

T5220 server

Hi, We have two T5220 servers in our datacentre one server is showing 64 processors online and another showing 32 processors online two are newly purchased, there is no hardware faults in this server one server has 64gb memory and it shows 64 processors, and other having 32gb memory and it... (5 Replies)
Discussion started by: rajasekg
5 Replies

6. Solaris

Set up new T5220 remotely

I have a new T5220 racked at our remote office and the guys who racked it does not know how to configure the SP on the system .. is there any way i can do it remotely ? (1 Reply)
Discussion started by: fugitive
1 Replies

7. Solaris

Jumpstart Issues With T5220

I'm trying to use a V210 (sun4u) configured as a jumpstart server to flash install a number of T5220's (sunv4). The Facts: V210 - Solaris 10 (September 2010 Release / not patched) T5220's - Archive's created using prior (unknown) version of solaris 10. Flar -i <archive name> shows the... (6 Replies)
Discussion started by: Celtic_Monkey
6 Replies

8. Solaris

T5220

Hi Guys and Gals, Wondering if anyone could help me, tricky one this. Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc. But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Discussion started by: callmebob
1 Replies

9. Solaris

T5220

Hello guys, can anyone give me some advice on how to perform clean installation of Solaris 10 on T5220 ? I am connected with serial management port on the machine, i have the ok promt and now i should eject the dvdrom to insert Solaris dvd into and start the clean install. So how to do that... (3 Replies)
Discussion started by: tonijel
3 Replies

10. Solaris

Storage issue on T5220

We have one box T5220 which was assigned 2x100G Luns but i have a strange problem if i use powermt display it only shows me one card but cfgadm, fcinfo commands shows 2 dual port cards as up. What could be the reason for it. I already did a re-configure reboot but that didn't help. Can anyone help... (1 Reply)
Discussion started by: fugitive
1 Replies
All times are GMT -4. The time now is 11:26 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy