04-25-2016
Looks like you have to go and see on the server if there are no flashing led on the drive also, and take a cleaning tape with you I think it needs a feew passes of cleaning tape...
did you try offl option of mt to kick the tape out? As I suspect it will not give you back the tape... But if it works - quick give a clean, and check the drive, and be prepared to call HP support...
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
/dev/rmt/0: No such device or address
I get this when I do a "mt -f /dev/rmt/0 rewind"
This is on a Solaris 7 system.
I tried
devfsadm -c tape
and
drvconfig ; tape
and both didn't work.
Help please....... :confused: (4 Replies)
Discussion started by: shorty
4 Replies
2. UNIX for Dummies Questions & Answers
Hello guys,
on my Red Hat machine the /bin/mt status command gives the output dev/tape: inappropriate ioctl for device. This messages comes up after the Server has been rebooted.
Anybody an idea?
Thx
masterofdesaster (8 Replies)
Discussion started by: masterofdesaste
8 Replies
3. UNIX Desktop Questions & Answers
Ciao a tutti!!!
il mio problema è questo: sto cercando di inviare dei comandi AT da PC a cellulare utilizzando il bluetooth e cygwin e vorrei visualizzare le risposte nella shell bash. Per farlo apro due terminali utilizzando le seguente istruzioni:
xterm &
Sul primo scrivo
cat /dev/ttyS2
... (0 Replies)
Discussion started by: blianna
0 Replies
4. UNIX and Linux Applications
Ciao a tutti!!!
il mio problema è questo: sto cercando di inviare dei comandi AT da PC a cellulare utilizzando il bluetooth e cygwin e vorrei visualizzare le risposte nella shell bash. Per farlo apro due terminali utilizzando le seguente istruzioni:
xterm &
Sul primo scrivo
cat /dev/ttyS2
... (1 Reply)
Discussion started by: blianna
1 Replies
5. SuSE
Dear all,
we are running SLES 11 where an iscsi tape library is
attached. To load the tape in a slot we are using for
instance the command #mtx -f /dev/sg1 load 2 which is doing
very well.
But after a server's reboot the device name of the loader is now
/dev/sg4 or /dev/sg5 I mean it is... (1 Reply)
Discussion started by: xunil321
1 Replies
6. Solaris
I have an HP Proliant DL380 with Intel Processors that I recently loaded Solaris 10 with latest patches on it. I'm trying to do a ufsdump to an HP DAT 40 tape drive via SCSI, but I can't get it to do anything because /dev/rmt is empty. I've tried the following with luck:
touch /reconfigure,... (7 Replies)
Discussion started by: cvaughn
7 Replies
7. Hardware
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (1 Reply)
Discussion started by: vickyingle5
1 Replies
8. Solaris
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (5 Replies)
Discussion started by: vickyingle5
5 Replies
9. Hardware
hello to everybody
I have Ubuntu Lucid 10.04 installed on my Desktop and I have a PCI serial card in my computer and it has only one serial port.
Actually I want to use this serial port for the serial communication and for that I executed this command :
$ setserial -g /dev/ttyS
and I... (0 Replies)
Discussion started by: piyush011
0 Replies
10. UNIX for Advanced & Expert Users
Is there a trick to mounting swap in n a lvm? I can't get it to work.
# swapon -va
swapon on /dev/mapper/VG-lv_swap
swapon: /dev/mapper/VG-lv_swap: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/mapper/VG-lv_swap: pagesize=4096, swapsize=4294967296,... (1 Reply)
Discussion started by: cokedude
1 Replies
tz(4) Kernel Interfaces Manual tz(4)
Name
tz - SCSI magnetic tape interface
Syntax
VAX NCR 5380:
adapter uba0 at nexus?
controller scsi0 at uba0 csr 0x200c0080 vector szintr
tape tz0 at scsi0 drive 0
VAX DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC KZQ:
adapter uba0 at nexus?
controller kzq0 at ibus? csr 0761300vector sii_intr
tape tz0 at kzq0 drive 0
RISC NCR ASC:
adapter ibus0 at nexus?
controller asc0 at ibus? vector ascintr
tape tz0 at asc0 drive 0
Description
The SCSI tape driver provides a standard tape drive interface as described in This is a driver for any Digital SCSI tape device.
For the TZK10 QIC format tape drive, the densities supported are QIC-24 (read only) block size of 512 byte blocks, QIC-120, and QIC-150
read/write block size of 512 byte blocks, and QIC-320 read/write block size of 1024 byte blocks. With QIC format style tapes all reads and
writes must be in multiple of the block size. This is a requirement of fixed block tape drives because record boundaries are not pre-
served. The QIC densities are selected using the following special device names:
QIC-24 Fixed block size.
QIC-120 Fixed block size.
QIC-150 Fixed block size.
QIC-320 Fixed block size.
With all fixed block tape devices a of a file to the tape must be padded out. An example of this is a of which has a size of approximately
3800 bytes.
dd if=/etc/gettytab of=/dev/rmt0h bs=10k conv=sync
or
dd if=/etc/gettytab of=/dev/rmt0l bs=512 conv=sync
The option of pads the output to block size.
This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape drives). See for further
details.
Tape Support
TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
Diagnostics
All diagnostic messages are sent to the error logger subsystem.
Files
See Also
mtio(4), nbuf(4), SCSI(4), MAKEDEV(8), uerf(8), tapex(8)
Guide to the Error Logger
tz(4)