Multi-bit ECC Error on X4100 M2 Server Sun Fire Post: 302925277

Sponsored Content

Special Forums Hardware Multi-bit ECC Error on X4100 M2 Server Sun Fire Post 302925277 by hicksd8 on Saturday 15th of November 2014 11:07:58 AM

11-15-2014

Moderator

Please refer to the X4100 M2 manual.

The relevant page is a follows: (cut and pasted)

Changing POST Options

These instructions are optional, but you can use them to change the operations that

the server performs during POST testing.

1. Initialize the BIOS Setup utility by pressing the F2 key while the system is

performing the power-on self-test (POST).

The BIOS Main menu screen is displayed.

2. When the BIOS Main menu screen is displayed, select Boot.

The Boot Settings screen is displayed.

3. When the Boot Settings screen is displayed, select Boot Settings Configuration.

The Boot Settings Configuration screen is displayed.

4. On the Boot Settings Configuration screen, there are several options that you can

enable or disable:

■

Quick Boot: This option is disabled by default. If you enable this, the BIOS skips

certain tests while booting, such as the extensive memory test. This decreases the

time it takes for the system to boot.

■

System Configuration Display: This option is disabled by default. If you enable

this, the System Configuration screen is displayed before booting begins.

■

Quiet Boot: This option is disabled by default. If you enable this, the Sun

Microsystems logo is displayed instead of POST codes.

■

Language: This option is reserved for future use. Do not change.

■

Add On ROM Display Mode: This option is set to Force BIOS by default. This

option has effect only if you have also enabled the Quiet Boot option, but it

controls whether output from the Option ROM is displayed. The two settings for

this option are as follows:

■

Force BIOS: Remove the Sun logo and display Option ROM output.

■

Keep Current: Do not remove the Sun logo. The Option ROM output is not

displayed.

■

Boot Num-Lock: This option is On by default (keyboard Num-Lock is turned on

during boot). If you set this to off, the keyboard Num-Lock is not turned on

during boot.

■

Wait for F1 if Error: This option is disabled by default. If you enable this, the

system will pause if an error is found during POST and will only resume when

you press the F1 key.

■ Interrupt 19 Capture: This option is reserved for future use. Do not change.

hicksd8

View Public Profile for hicksd8

Find all posts by hicksd8

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

unable to telnet from win xp to sun fire v880 server

Hi everybody i am trying to telnet to sun server from win xp machine but getting message "x21 error connection closed by remote user". i had make changes in /etc/default/login & /etc/fuser file still i have not getting telnet access. my win xp machines ip is 10.205.121.177 & sun server ip is...

2. Solaris

Does the Sun fire x4100 support HVM?

I have looked all over the bios configuration to enable hardware virtualization and found nothing. Could someone tell if this server support it and if so where I go to enable that feature. By the way this is a x86 server.

3. Solaris

How to create Logical domain in Sun Fire T2000 server

Hi I am fresher in Virtualisation in solaris 10.I need to know how to install and configure guest OS, I have a server Sun T2000 with solaris 10 OS BASE. How to install logical domain, what are the prerequest for installing l domain can some one guide me what are the basic requirement to...

4. Solaris

Sun Fire V240 server Fan replacement

I have a sun fire v240 server. The output of prtdiag -v shows a failed fan. There are 3 fans for cooling system board. There is 1 fan for each of the powersupply (There are 2 powersupplies) From the below output how do i know which fan is bad and whats its location...

5. Solaris

Need Help, I want to reset password for Sun Fire T2000 Server

============================== ALOM BOOTMON v1.3.1 ALOM Build Release: 001 Reset register: f0000000 EHRS ESRS LLRS SWRS ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED. TTYC - Internal Loopback Test TTYC -...

6. Ubuntu

Ubuntu Install on Sun Fire X4100 network issues

Hi I have two Sun Fire X4100 machines with Ubuntu 12.04 installed on them. I am able to configure the Net Mgt port with an IP address and access the ILOM from the browser. I can also boot the Ubuntu installed and redirect the output. The issue i have is that when i configure the network...

7. Solaris

Help with Solaris 8 10/00 Installation on Sun Fire V490 Server

cat note Hi Sun Solaris Experts, When I try to install Solaris 8 10/00 OS via the Solaris 8 Installation Disk on our Sun Fire V490 Server using the command , I get: boot: cannot open kernel/sparcv9/unix which means it can't find the unix kernel file on the installation disk . By the way, I...

8. Solaris

Solaris 10 1/13 & Sun Fire V490 Server

Hi Solaris/Unix Experts, I've installed Oracle Solaris 10 1/13 on a Sun Fire V490 Server via its external Serial Port using a Cisco Console Cable connected to my Laptop PC running SecureCRT terminal emulation software emulating VT100 Terminal. The Sun Fire V490 server has two on-board...