Network / global zones (Solaris 10 / 8) config recommendations Post: 302864019

Sponsored Content

Operating Systems Solaris Network / global zones (Solaris 10 / 8) config recommendations Post 302864019 by BradJM on Tuesday 15th of October 2013 04:07:24 PM

10-15-2013

Registered User

ifconfig -a

Code:

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index
 1
        inet 127.0.0.1 netmask ff000000 
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 ind
ex 1
        zone server1
        inet 127.0.0.1 netmask ff000000 
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 ind
ex 1
        zone server2
        inet 127.0.0.1 netmask ff000000 
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.20.77 netmask ffffff00 broadcast 192.168.20.255
bge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        zone server1
        inet 10.10.1.21 netmask ffffff00 broadcast 10.10.1.255
bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        zone server2
        inet 10.10.1.23 netmask ffffff00 broadcast 10.10.1.255

netstat -rn

Code:

Routing Table: IPv4
  Destination           Gateway           Flags  Ref     Use     Interface 
-------------------- -------------------- ----- ----- ---------- --------- 
default              192.168.20.241       UG        1       6458           
192.168.20.0         192.168.20.77        U         1        368 bge0      
224.0.0.0            192.168.20.77        U         1          0 bge0      
127.0.0.1            127.0.0.1            UH       48    1037223 lo0

Last edited by BradJM; 10-15-2013 at 05:10 PM.. Reason: missing info - fix server names

BradJM

View Public Profile for BradJM

Find all posts by BradJM

6 More Discussions You Might Find Interesting

1. Solaris

How to access ENV variables of non global zones in global zone???

Hi Guys, My requirement is I have file called /opt/orahome/.profile in non global zone. PATH=/usr/bin:/usr/ucb:/etc:/usr/sbin:/usr/local/bin:/usr/openwin/bin:. export PATH PS1="\${ORACLE_SID}:`hostname`:\$PWD$ " export PS1 EDITOR=vi export EDITOR ENV=/opt/orahome/.kshrc export ENV...

2. Solaris

How to see global hostname by logging in non global zones?

Hi guru Could any one help me by letting me know, how to see global hostname by logging in non global zones Regards

3. Solaris

Advanced Sysconfig use when building non-global zones in Solaris 11

I'm in an LDOM. I'm building non-global IP exclusive zones. I am using manifests and profiles to configure the system after install so I don't have to tab through the sysconfig startup dialog everytime I boot a system the first time for settings that never change (DNS, regional data, NTP etc). I...

4. Solaris

Solaris non-global zone network vlan

Have 2 nics on physical system net0 phys 1500 up -- net1 phys 1500 up -- 1. I want to create a link aggregation with LACP enabled with above 2 nics 2. Create port-group(Like we create on ESXi) with VLAN-ID 2141 3. And assign this...

5. Solaris

Solaris 10 - rexplorer and Non-Global zones

Hi all - not really a problem as such, but just hoping someone can shed some light. We point rexplorer to multiple Global zones and it works as expected. However, each Non-Global zone get around a hundred of root su'ing to root messages, i.e.: SU 07/14 03:02 + ??? root-root SU 07/14 03:02 +...

6. Solaris

Solaris Global/Zones patching

Issue is : We have Solaris Global with 12 Zones and some have 15 Zones. All the OS version are10. Is it possible to apply patch at Zone level instead of patching at Global level? Please let me know.

LEARN ABOUT DEBIAN

essidscan

ESSIDSCAN(8)							     Commands							      ESSIDSCAN(8)

NAME

       essidscan - scan for ESSID corresponding to available WLAN access points

SYNOPSIS

       In /etc/network/interfaces:

       mapping <interface> script essidscan

DESCRIPTION

       The essidscan utility is used to tell the ifup and ifdown utilities about the current SSID of the WLAN currently being accessed.  It can be
       used to map the SSID name to an iface stanza.

CONFIGURATION

       A sample /etc/network/interfaces may look like this:

	  mapping hotplug
	    script /etc/network/essidscan
	    map SSIDONE  wlan-work
	    map SSIDTWO  wlan-work
	    map HOME

	  iface wlan-work inet dhcp
	    wireless-key     1234-5678-9ABC-DEF0-1234-5678-9A
	    wireless-keymode restricted

	  iface HOME inet static
	    address	     192.168.2.4
	    netmask	     255.255.255.0
	    gateway	     192.168.2.1
	    wireless-essid   HOME
	    wireless-key     s:somepassword
	    wireless-keymode open

	  iface DEFAULT inet dhcp

FILES

       /etc/network/interfaces
	      the interfaces definition file

       /etc/network/run/ifstate
	      a record of the current state of the interfaces, managed by ifup and ifdown

SEE ALSO

       interfaces(5) ifscheme(8) ifup(8) ifdown(8)

AUTHORS

       Tor Slettnes <tor@slett.net>

																      ESSIDSCAN(8)