06-20-2013
if you have already eliminated the server load as the issue, contact verizon's and at&t's business customers department for some thoughts on that matter ...
This User Gave Thanks to Just Ice For This Post:
7 More Discussions You Might Find Interesting
1. Solaris
Good Day,
I've remotely mounted a cdrom (no problems theere). The kicker is I can see the directories on the remote CD bout I can't see the files. What am I doing wrong? I'm logged in as root on both systems. All the permissions seem okay - what am I missing? Thanks (2 Replies)
Discussion started by: greg69
2 Replies
2. Solaris
Morning all,
I am attempting to load a package from a Solaris 8 CDROM.
This fails with the error :
"pkgadd: ERROR: unable to access pkgmap file </cdrom/ .........../SUNWlibC/pkgmap>
No changes were made to the system"
Any help would be appreciated
Andy (6 Replies)
Discussion started by: AndyD
6 Replies
3. IP Networking
My question is such:
I want to control the bandwidth of my users and cap there speed on the network. I was told by a Cisco rep that it is better to police or control the bandwidth at the switch and not via the router. It that the correct place to control bandwidth at the switch or would it be... (0 Replies)
Discussion started by: metallica1973
0 Replies
4. Linux
I was wondering if it is possible to setup SFTP to go through the internet proxy while connecting to an internet location.
Problem: Client system is behind internet proxy. SFTP to any internet location fails as there is no documented way to configure SFTP to connect to internet locations through... (4 Replies)
Discussion started by: toobrown1
4 Replies
5. IP Networking
Does anyone know how can I determine which user is UPLOADING via http protocol? Like sending video on youtube?
Or maybe how to throttle multimedia uploads ? Or any uploads?
maybe get packet size? (9 Replies)
Discussion started by: darkman_hr
9 Replies
6. Windows & DOS: Issues & Discussions
hi,
did anyone know how to configure a priority of dns ports (and other ports) on QOS on windows 2003? hard to understand the group policy "explain" tab on 'qos packet scheduler', no elaboration on how to use it.
thanks for any comment you may add.
---------- Post updated at 05:03 PM... (0 Replies)
Discussion started by: itik
0 Replies
7. IP Networking
Hello all my friends
Please Read to understand my problem
I have 1 MB bandwidth and two networks then i did traffic control on my two internal interfaces i.e eth1(192.168.3.0/24) and eth2(172.16.3.0/24) (internal) and eth0 (outside)
Then i divided my bandwidth using tc command with the... (3 Replies)
Discussion started by: rink
3 Replies
LEARN ABOUT FREEBSD
atmarp
ATMARP(8) Maintenance Commands ATMARP(8)
NAME
atmarp - administer classical IP over ATM connections
SYNOPSIS
atmarp -a
atmarp -c [[atm]number]
atmarp -q ip_addr [qos qos] [sndbuf bytes]
atmarp -s ip_addr [itf.]vpi.vci [qos qos] [sndbuf bytes] [temp] [pub] [null]
atmarp -s ip_addr atm_addr [qos qos] [sndbuf bytes] [temp] [pub] [arpsrv]
atmarp -d ip_addr [arpsrv]
atmarp -V
DESCRIPTION
atmarp is used to maintain the ATMARP table of the ATMARP demon. The table can be listed, new PVC and SVC entries can be added, and exist-
ing entries can be deleted. In addition to that, atmarp is also used to create new IP over ATM interfaces.
Note that the kernel has its own ATMARP table containing only entries for destinations to which a connection exists. The table of atmarpd
can also contain currently unused entries.
OPTIONS
-a list the current ATMARP table.
-c create the specified IP interface. If the interface number is omitted, the operating system assigns the next free number and atmarp
prints the resulting interface name (e.g. `atm0') on standard output.
-q sets the QOS and the send buffer size to use as the default for all VCs generated for that IP network (ip_addr must be the address
of the network).
-s set up a PVC or create an SVC entry. The following options are recognized:
qos qos
uses the specified quality of service (see qos(7) for the syntax). UBR at link speed is used by default.
sndbuf bytes
tries to set the send buffer to the specified number of bytes. A system default value is used if sndbuf is not specified.
temp does not mark the entry as permanent, i.e. it will time out and then be removed.
pub publishes the entry (only relevant for ATMARP server). ATMARP requests for entries not marked for publishing yield an
ATMARP_NAK response.
null uses NULL encapsulation instead of LLC/SNAP encapsulation on the PVC. This option is not available for SVCs, because the
LLC/SNAP header is required to identify ATMARP packets. null also implies that the entry is permanent.
arpsrv identifies the entry pointing to the ATMARP server. Note that the node acting as the ATMARP server must have no ATMARP server
entry in its ATMARP table.
-d delete the specified ARP entry. In order to prevent accidental deletion of the ATMARP server entry, the arpsrv flag must be speci-
fied when deleting it.
-V print the version number of atmarp on standard output and exit.
FILES
/var/run/atmarpd.table ATMARP table
AUTHOR
Werner Almesberger, EPFL ICA <Werner.Almesberger@epfl.ch>
SEE ALSO
atmarpd(8), clip(8), qos(7)
Linux April 26, 2000 ATMARP(8)