The following was obtained by the "save" command in "format" on a Blade 1500.
If you append it to /etc/format.dat then "format" should offer the "DEFAULT" in the "type" command. Then you can write the Sun disk label with the "label" command.
The OS then will see a 127.5 GB disk.
This User Gave Thanks to MadeInGermany For This Post:
Hi,
I am attempting to configure my ethernet interface on a Sun Blade 1500. I am testing out my network interface my connecting a crossover cable from my blade to a windows box. I would like to assign an ip address of 10.0.0.2 to "bge0" and netmask of "255.0.0.0". I have typed the following:
... (1 Reply)
I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks... (1 Reply)
Hi
I'm completely new in solaris,and don't know many about it.
I was installed solaris 10 on sun blade 1500,and also I need to install oracle on it.
Now I stuck on some thing and i'm sure that you help me.
When i started Oracle installation system told me that I don't have enogh swap space.... (1 Reply)
Hello,
I'm trying to compile PHP 5.3.6 with Apache2 and MySql 5.5.12. I hit a problem that I can't seem to resolve by myself and I could not find a solution on the web.
It looks like Apache and MySql installed ok, I can start/stop them with no problem.
When I try to compile PHP the... (4 Replies)
Hello,
I need to copy 1500+ files (total of 170mb) from our /tmp/directory to a different directory /application/program/files
I issue the command:
user@host> cp * /application/program/files
I am getting the follwing error:
ksh: /usr/bin/cp: arg list too long
being new to aix, I... (6 Replies)
Good afternoon all,
First, sorry for my English, this is not my first language but I try my best :).
So, here we go.
A friend of mine gave me an old Sun Blade 1500 he wasn't using. He said it was working fine except for the missing hard drive.
I had in my IT personnal box an old IDE... (33 Replies)
HI,
How do we figure out if the server is half blade server or full blade server?
Anything we need to look at to know on this?
thanks in advance (9 Replies)
Discussion started by: snchaudhari2
9 Replies
LEARN ABOUT DEBIAN
halt
HALT(8) Linux System Administrator's Manual HALT(8)NAME
halt, reboot, poweroff - stop the system.
SYNOPSIS
/sbin/halt [-n] [-w] [-d] [-f] [-i] [-p] [-h]
/sbin/reboot [-n] [-w] [-d] [-f] [-i]
/sbin/poweroff [-n] [-w] [-d] [-f] [-i] [-h]
DESCRIPTION
halt notes that the system is being brought down in the file /var/log/wtmp, and then either tells the kernel to halt, reboot or power-off
the system.
If halt or reboot is called when the system is not in runlevel 0 or 6, in other words when it's running normally, shutdown will be invoked
instead (with the -h or -r flag). For more info see the shutdown(8) manpage.
The rest of this manpage describes the behaviour in runlevels 0 and 6, that is when the systems shutdown scripts are being run.
OPTIONS -n Don't sync before reboot or halt. Note that the kernel and storage drivers may still sync. This implies -d.
-w Don't actually reboot or halt but only write the wtmp record (in the /var/log/wtmp file).
-d Don't write the wtmp record.
-f Force halt or reboot, don't call shutdown(8).
-i Shut down all network interfaces just before halt or reboot.
-h Put all hard drives on the system in stand-by mode just before halt or power-off.
-p When halting the system, switch off the power. This is the default when halt is called as poweroff.
DIAGNOSTICS
If you're not the superuser, you will get the message `must be superuser'.
NOTES
Under older sysvinit releases , reboot and halt should never be called directly. From release 2.74 on halt and reboot invoke shutdown(8) if
the system is not in runlevel 0 or 6. This means that if halt or reboot cannot find out the current runlevel (for example, when
/var/run/utmp hasn't been initialized correctly) shutdown will be called, which might not be what you want. Use the -f flag if you want to
do a hard halt or reboot.
The -h flag puts all hard disks in standby mode just before halt or power-off. Right now this is only implemented for IDE drives. A side
effect of putting the drive in stand-by mode is that the write cache on the disk is flushed. This is important for IDE drives, since the
kernel doesn't flush the write cache itself before power-off.
The halt program uses /proc/ide/hd* to find all IDE disk devices, which means that /proc needs to be mounted when halt or poweroff is
called or the -h switch will do nothing.
AUTHOR
Miquel van Smoorenburg, miquels@cistron.nl
SEE ALSO shutdown(8), init(8)
Nov 6, 2001 HALT(8)