The following was obtained by the "save" command in "format" on a Blade 1500.
If you append it to /etc/format.dat then "format" should offer the "DEFAULT" in the "type" command. Then you can write the Sun disk label with the "label" command.
The OS then will see a 127.5 GB disk.
This User Gave Thanks to MadeInGermany For This Post:
Hi,
I am attempting to configure my ethernet interface on a Sun Blade 1500. I am testing out my network interface my connecting a crossover cable from my blade to a windows box. I would like to assign an ip address of 10.0.0.2 to "bge0" and netmask of "255.0.0.0". I have typed the following:
... (1 Reply)
I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks... (1 Reply)
Hi
I'm completely new in solaris,and don't know many about it.
I was installed solaris 10 on sun blade 1500,and also I need to install oracle on it.
Now I stuck on some thing and i'm sure that you help me.
When i started Oracle installation system told me that I don't have enogh swap space.... (1 Reply)
Hello,
I'm trying to compile PHP 5.3.6 with Apache2 and MySql 5.5.12. I hit a problem that I can't seem to resolve by myself and I could not find a solution on the web.
It looks like Apache and MySql installed ok, I can start/stop them with no problem.
When I try to compile PHP the... (4 Replies)
Hello,
I need to copy 1500+ files (total of 170mb) from our /tmp/directory to a different directory /application/program/files
I issue the command:
user@host> cp * /application/program/files
I am getting the follwing error:
ksh: /usr/bin/cp: arg list too long
being new to aix, I... (6 Replies)
Good afternoon all,
First, sorry for my English, this is not my first language but I try my best :).
So, here we go.
A friend of mine gave me an old Sun Blade 1500 he wasn't using. He said it was working fine except for the missing hard drive.
I had in my IT personnal box an old IDE... (33 Replies)
HI,
How do we figure out if the server is half blade server or full blade server?
Anything we need to look at to know on this?
thanks in advance (9 Replies)
Discussion started by: snchaudhari2
9 Replies
LEARN ABOUT NETBSD
apmlabel
APMLABEL(8) BSD System Manager's Manual APMLABEL(8)NAME
apmlabel -- update disk label from Apple Partition Map
SYNOPSIS
apmlabel [-fqrw] device
DESCRIPTION
apmlabel is used to update a NetBSD disk label from the Apple Partition Map found on disks that were previously used on Mac OS systems (or
other APM using systems).
apmlabel scans the APM contained in the first blocks of the disk and generates additional partition entries for the disk from the entries
found. Driver and patches partitions are ignored.
Each APM entry which does not have an equivalent partition in the disk label (equivalent in having the same size and offset) is added to the
first free partition slot in the disk label. A free partition slot is defined as one with an fstype of 'unused' and a size of zero ('0').
If there are not enough free slots in the disk label, a warning will be issued.
The raw partition (typically partition c, but d on i386 and some other platforms) is left alone during this process.
By default, the proposed changed disk label will be displayed and no disk label update will occur.
Available options:
-f Force an update, even if there has been no change.
-q Performs operations in a quiet fashion.
-r In conjunction with -w, also update the on-disk label.
-w Update the in-core label if it has been changed.
SEE ALSO disklabel(8), dkctl(8), pdisk(8)HISTORY
The apmlabel command appeared in NetBSD 5.0.
BSD May 19, 2007 BSD