06-15-2013
Have you tried specifying the block device you want to work with, instead of allowing it to scan? The bug report indicates that as a workaround.
gparted is a front-end to parted. Perhaps calling the backend directly offers you more control? For more info, man parted may be useful. (Disclaimer: I don't use [g]parted.)
Alternatively, you can try a different partition table editing program, such as fdisk followed by the appropriate filesystem creation command (some variant of mkfs, I imagine).
Regards,
Alister
This User Gave Thanks to alister For This Post:
9 More Discussions You Might Find Interesting
1. Solaris
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Discussion started by: civic2005
12 Replies
2. UNIX for Dummies Questions & Answers
Hello,
i am using finch (unix commandline instant messaging client using libgnt) which is running connected to /dev/pts/1
Now I would like to "remote control" the program by sending the key combinations normally typed on the keyboard from a programm in another shell. So I tried:... (0 Replies)
Discussion started by: mentos
0 Replies
3. UNIX for Dummies Questions & Answers
How are these two different? They both prevent output and error from being displayed. I don't see the use of the "&"
echo "hello" > /dev/null 2>&1
echo "hello" > /dev/null 2>1 (3 Replies)
Discussion started by: glev2005
3 Replies
4. Solaris
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Discussion started by: DustinT
13 Replies
5. AIX
Hi,
How can i check that i am using RAW devices for storage in my AIX machine...
Also after adding a LUN from storage to a aix host, when i check /dev in the host, i can see both rhdisk and hdisk with same number
eg:
dcback1(root):/dev>ls -lrt | grep disk12
crw------- 1 root ... (4 Replies)
Discussion started by: jibujacob
4 Replies
6. AIX
Hello AIXians,
I can't boot my AIX, it hangs and stops at the code error: 0518
After searching google, I knew the problem is due to problems in File Systems.
So the solution is booting from any bootable media, then run these commands in maintenance mode:
#fsck -y /dev/hd4
#fsck -y... (3 Replies)
Discussion started by: Mohannad
3 Replies
7. Shell Programming and Scripting
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
Discussion started by: RogerBaran
12 Replies
8. Red Hat
Hi,
Please suggest steps to change grub from /dev/sda to /dev/sdb, (1 Reply)
Discussion started by: manoj.solaris
1 Replies
9. HP-UX
Hi,
In our HP-UX B.11.11. I could not find dev/urandom and dev/random
Are all pseudo-devices implemented as device drivers, or in need to run /configure some package to install the package to have dev/urandom.
Please help (4 Replies)
Discussion started by: rashi
4 Replies
LEARN ABOUT DEBIAN
opensc-tool
OPENSC-TOOL(1) OpenSC tools OPENSC-TOOL(1)
NAME
opensc-tool - generic smart card utility
SYNOPSIS
opensc-tool [OPTIONS]
DESCRIPTION
The opensc-tool utility can be used from the command line to perform miscellaneous smart card operations such as getting the card ATR or
sending arbitrary APDU commands to a card.
OPTIONS
--info, -i
Print information about OpenSC, such as version and enabled components
--atr, -a
Print the Answer To Reset (ATR) of the card, output is in hex byte format
--name, -n
Print the name of the inserted card (driver)
--serial
Print the card serial number (normally the ICCSN), output is in hex byte format
--send-apdu apdu, -s apdu
Sends an arbitrary APDU to the card in the format AA:BB:CC:DD:EE:FF...
--list-files, -f
Recursively lists all files stored on card
--list-readers, -l
Lists all configured readers
--list-drivers, -D
Lists all installed card drivers
--reader num, -r num
Use the given reader number. The default is 0, the first reader in the system.
--card-driver driver, -c driver
Use the given card driver. The default is auto-detected.
--wait, -w
Wait for a card to be inserted
--verbose, -v
Causes opensc-tool to be more verbose. Specify this flag several times to enable debug output in the opensc library.
SEE ALSO
opensc-explorer(1)
opensc 06/03/2012 OPENSC-TOOL(1)