Sponsored Content
Operating Systems Solaris Sun-Fire V440 boot disk issue Post 302821355 by cerber0 on Friday 14th of June 2013 12:09:31 PM
Old 06-14-2013
This User Gave Thanks to cerber0 For This Post:
 

10 More Discussions You Might Find Interesting

1. Solaris

Sun Fire V440 and Patch 109147-39

Got an curious issue. I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on. The patch modified mainly the linker libraries and commands. ... (2 Replies)
Discussion started by: BOFH
2 Replies

2. Solaris

Sun Fire v440 keeps shutting down

Hello, I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies

3. Solaris

Sun Fire won't boot anymore

Hi all - I have an issue with our (way old) single processor SunFire 280R, running Solaris 9.0.4. It won't boot even after multiple power cycles. There was a power outage last week end in the computer room, so this might have to do. In normal boot mode, the screen shows a single line : ... (5 Replies)
Discussion started by: bostella
5 Replies

4. Solaris

Sun Fire v440 hardware problem (can't get ok>)

First of all it's shut down 60 second after power on and write on console : SC Alert: Correct SCC not replaced - shutting managed system down! This is cured by moving out battery from ALOM card. Now server start to loop during the testing. That's on the console: >@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies

5. Solaris

error messages in Sun Fire V440

Hello, I am seeing error messages in V440 (OS = solaris 8). I have copied here : The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day.. I... (5 Replies)
Discussion started by: upengan78
5 Replies

6. Solaris

ALOM wont work when KVM connected to Sun Fire V440 server

Hi, I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection. ... (0 Replies)
Discussion started by: jimmy54321
0 Replies

7. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies

8. Solaris

Sun Fire v440 Over heat Problem.

Dear Team, I need some expert advice to my problem. We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies

9. Solaris

Removing a disk from SUN Fire V440 running Solaris 8

Hi, I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either. Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies

10. Solaris

Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1)

Hi, I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error: WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1): SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
mdlogd(1M)						  System Administration Commands						mdlogd(1M)

NAME
mdlogd - Solaris Volume Manager daemon SYNOPSIS
mdlogd DESCRIPTION
mdlogd implements a simple daemon that watches the system console looking for messages written by the Solaris Volume Manger. When a Solaris Volume Manager message is detected, mdlogd sends a generic SNMP trap. To enable traps, you must configure mdlogd into the SNMP framework. See Solaris Volume Manager Administration Guide. USAGE
mdlogd implements the following SNMP MIB: SOLARIS-VOLUME-MGR-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI DisplayString FROM SNMPv2-TC; -- Sun Private MIB for Solaris Volume Manager sun OBJECT IDENTIFIER ::= { enterprises 42 } sunSVM OBJECT IDENTIFIER ::= { sun 104 } -- this is actually just the string from /dev/log that -- matches the md: regular expressions. -- This is an interim SNMP trap generator to provide -- information until a more complete version is available. -- this definition is a formalization of the old -- Solaris DiskSuite mdlogd trap mib. svmOldTrapString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the matched string that was obtained from /dev/log." ::= { sunSVM 1 } -- SVM Compatibility ( error trap ) svmNotice TrapTRAP-TYPE ENTERPRISE sunSVM VARIABLES { svmOldTrapString } DESCRIPTION "SVM error log trap for NOTICE. This matches 'NOTICE: md:'" ::= 1 svmWarningTrap TRAP-TYPE ENTERPRISE sunSVM VARIABLES { svmOldTrapString } DESCRIPTION "SVM error log trap for WARNING.. This matches 'WARNING: md:'" ::= 2 svmPanicTrap TRAP-TYPE ENTERPRISE sunSVM VARIABLES { svmOldTrapString } DESCRIPTION "SVM error log traps for PANIC.. This matches 'PANIC: md:'" ::= 3 END ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWlvma, SUNWlvmr | +-----------------------------+-----------------------------+ |Interface Stability |Obsolete | +-----------------------------+-----------------------------+ SEE ALSO
snmpdx(1M), attributes(5) Solaris Volume Manager Administration Guide SunOS 5.10 3 Jun 2004 mdlogd(1M)
All times are GMT -4. The time now is 08:48 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy