Hi all, this is my first question on this forum, so if it isn't in the correct location, please let me know where to post.
We are using Solaris 8 and with the power setting enabled the monitor will not wake up. It can take anywhere from 5 to 30 minutes for the monitor to display.
One of the individuals here thinks that the machine needs to have the configuration reset and then reconfigure to disable. I thought this was kind of extreme and since it has been over 20 years since I worked on UNIX and have never really done much with Solaris, I wasn't comfortable doing this.
After doing some research, I noticed that the power settings for the display are enabled, when I disable them the monitor responds better. But, after a while it goes back to the original settings. Especially when rebooting.
I contacted a collage colleague who has worked on Solaris for most of her career. She talked to someone that she works with who was having the same problem some time ago. He suggested using the following commands:
When I enter these commands in the term window the monitor works fine and never goes to sleep. We turn off the monitor by hand. The problem comes in when we reboot the system; the commands need to be manually re-entered.
So, the question is what script(s) needs to be modified with these commands so they are executed on startup? A link to where this could be done will help greatly.
Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg:
ð
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #56338483.
Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833.
... (1 Reply)
We have a RS6000, model B50, type 7046, where I installed AIX 4.3.3
But, if the power goes off, the operating system does not restart,
and I have to go there and push the button to start AIX again.
Is there any way this procedure to be avoided,
this is, I want the AIX to start automatically... (9 Replies)
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
Hello,
I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization.
So when booted , it goes into OPEN Firmware
I/O Hosting requires a hosting partition boot not permitted exit called
> ok
Panel shows > IO... (3 Replies)
Hello Forum,
I am very newbie with AIX.
We have 2 AIX 9111-285 servers. The OS version is 5.3.
After the power outage, they did not come up.
I try to unplug the power cable and re-connect after 1 minutes but do not help.
Both display the same reference code 110000AC on the front panel... (6 Replies)
A team member installed the wrong version of License Code on a Power 740 system used in our Development environment.
The system will no longer boot.
Does anyone have IBM documentation or experience to share on recovering a system that currently reports "Unsupported License Code version... (1 Reply)
Discussion started by: kevinedailey
1 Replies
LEARN ABOUT DEBIAN
mdbfontencoding
mdbFontEncoding(5) The m17n Library mdbFontEncoding(5)NAME
mdbFontEncoding - Font Encoding
DESCRIPTION
The m17n library loads information about the encoding of each font form the m17n database by the tags <font, encoding>. The data is loaded
as a plist of this format.
FONT-ENCODING ::= PER-FONT *
PER-FONT ::= '(' FONT-SPEC ENCODING [ REPERTORY ] ')'
FONT-SPEC ::=
'(' [ FOUNDRY FAMILY
[ WEIGHT [ STYLE [ STRETCH [ ADSTYLE ]]]]]
REGISTRY ')'
ENCODING ::= SYMBOL
FONT-SPEC is to specify properties of a font. FOUNDRY to REGISTRY are symbols corresponding to Mfoundry to Mregistry property of a font.
See m17nFont for the meaning of each property.
For instance, this FONT-SPEC:
(nil alice0 lao iso8859-1)
should be applied to all fonts whose family name is 'alice0 lao', and registry is 'iso8859-1'.
ENCODING is a symbol representing a charset. A font matching FONT-SPEC supports all characters of the charset, and a character code is
mapped to the corresponding glyph code of the font by this charset.
REPERTORY is a symbol representing a charset or 'nil'. Omitting it is the same as specifying ENCODING as REPERTORY. If it is not 'nil', the
charset specifies the repertory of the font, i.e, which character it supports. Otherwise, whether a specific character is supported by the
font or not is asked to each font driver.
For so called Unicode fonts (registry is 'iso10646-1'), it is recommended to specify 'nil' as REPERTORY because such fonts usually supports
only a subset of Unicode characters.
COPYRIGHT
Copyright (C) 2001 Information-technology Promotion Agency (IPA)
Copyright (C) 2001-2011 National Institute of Advanced Industrial Science and Technology (AIST)
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License
<http://www.gnu.org/licenses/fdl.html>.
Version 1.6.2 12 Jan 2011 mdbFontEncoding(5)