Hi all, this is my first question on this forum, so if it isn't in the correct location, please let me know where to post.
We are using Solaris 8 and with the power setting enabled the monitor will not wake up. It can take anywhere from 5 to 30 minutes for the monitor to display.
One of the individuals here thinks that the machine needs to have the configuration reset and then reconfigure to disable. I thought this was kind of extreme and since it has been over 20 years since I worked on UNIX and have never really done much with Solaris, I wasn't comfortable doing this.
After doing some research, I noticed that the power settings for the display are enabled, when I disable them the monitor responds better. But, after a while it goes back to the original settings. Especially when rebooting.
I contacted a collage colleague who has worked on Solaris for most of her career. She talked to someone that she works with who was having the same problem some time ago. He suggested using the following commands:
When I enter these commands in the term window the monitor works fine and never goes to sleep. We turn off the monitor by hand. The problem comes in when we reboot the system; the commands need to be manually re-entered.
So, the question is what script(s) needs to be modified with these commands so they are executed on startup? A link to where this could be done will help greatly.
Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg:
ð
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #56338483.
Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833.
... (1 Reply)
We have a RS6000, model B50, type 7046, where I installed AIX 4.3.3
But, if the power goes off, the operating system does not restart,
and I have to go there and push the button to start AIX again.
Is there any way this procedure to be avoided,
this is, I want the AIX to start automatically... (9 Replies)
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
Hello,
I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization.
So when booted , it goes into OPEN Firmware
I/O Hosting requires a hosting partition boot not permitted exit called
> ok
Panel shows > IO... (3 Replies)
Hello Forum,
I am very newbie with AIX.
We have 2 AIX 9111-285 servers. The OS version is 5.3.
After the power outage, they did not come up.
I try to unplug the power cable and re-connect after 1 minutes but do not help.
Both display the same reference code 110000AC on the front panel... (6 Replies)
A team member installed the wrong version of License Code on a Power 740 system used in our Development environment.
The system will no longer boot.
Does anyone have IBM documentation or experience to share on recovering a system that currently reports "Unsupported License Code version... (1 Reply)
Discussion started by: kevinedailey
1 Replies
LEARN ABOUT DEBIAN
livedings
LIVEDINGS(1) User Commands LIVEDINGS(1)NAME
livedings - graphical frontend for mididings
SYNOPSIS
livedings -p control_port -l listen_port [options]
DESCRIPTION
livedings is a graphical frontend for mididings that allows users to monitor and trigger scene changes. It runs as a separate application
that uses OSC to communicate with mididings. To use it, enable the OSCInterface hook in a mididings script, specifying two unused UDP
ports:
from mididings.extra.osc import OSCInterface
hook(OSCInterface(56418, 56419))
...
Then run livedings with the same port numbers:
$ livedings -p 56418 -l 56419
The first port is used by mididings to listen for commands, the second one is used to notify livedings of scene changes.
OPTIONS -h, --help
show this help message and exit
-p CONTROL_PORT
OSC port mididings is listening on
-l LISTEN_PORT
OSC port for notifications from mididings
-T enable custom theme and larger fonts
-x WIDTH
width of window in pixels (640)
-y HEIGHT
height of window in pixels (400)
-w LIST_WIDTH
width of scene list in pixels (240)
-F FONT
display font (Sans 14 bold)
-f LIST_FONT
scene list font (Sans 10)
-c COLOR
text color (gray50)
-C COLOR_HIGHLIGHT
highlight text color (black)
-b COLOR_BACKGROUND
background color
SEE ALSO mididings(1)AUTHOR
livedings was written by Dominic Sacre <dominic.sacre@gmx.de>.
This manual page was written by Alessio Treglia <alessio@debian.org>, for the Debian project (and may be used by others).
November 2010 LIVEDINGS(1)