Hello!
I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
Hi, I have a AIX 4.3 box here with problems cause of a disk in below VG.
volume group: workvg
lspv
hdisk4 000166789869ab2d workvg
hdisk5 000166789869b96b workvg
now hdisk4 disk has failed and cause the quorum was set, workvg became varied off.
I have to replace the... (2 Replies)
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
hi guys,
I've got a strange issue, may be one of you has experienced this.
SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440
everything is mirrored.
My issue is that I have a umpty directory but seems to have data on. Let me show you
# df -h /data
Filesystem size used... (10 Replies)
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (3 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Hello all,
Our Solaris 9? Sun Fire 480R backup server(in another city) is throwing disk errors such as these repeatedly.
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 24037056: Uncorrectable read error
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 7767072: Uncorrectable write error
... (18 Replies)
Discussion started by: RyanV
18 Replies
LEARN ABOUT FREEBSD
zfsloader
ZFSLOADER(8) BSD System Manager's Manual ZFSLOADER(8)NAME
zfsloader -- kernel bootstrapping final stage
DESCRIPTION
zfsloader is an extended variant of loader(8) with added support for booting from ZFS. This document describes only differences from
loader(8).
ZFS FEATURES
zfsloader supports the following format for specifying ZFS filesystems which can be used wherever loader(8) refers to a device specification:
zfs:pool/filesystem:
where pool/filesystem is a ZFS filesystem name as described in zfs(8).
If /etc/fstab does not have an entry for the root filesystem and vfs.root.mountfrom is not set, but currdev refers to a ZFS filesystem, then
zfsloader will instruct kernel to use that filesystem as the root filesystem.
ZFS COMMAND EXTENSIONS
lsdev [-v]
Lists ZFS pools in addition to disks and partitions. Adding -v shows more ZFS pool details in a format that resembles zpool status
output.
lszfs filesystem
A ZFS extended command that can be used to explore the ZFS filesystem hierarchy in a pool. Lists the immediate children of the
filesystem. The filesystem hierarchy is rooted at a filesystem with the same name as the pool.
FILES
/boot/zfsloader zfsloader itself.
EXAMPLES
Set the default device used for loading a kernel from a ZFS filesystem:
set currdev=zfs:tank/ROOT/knowngood:
SEE ALSO gptzfsboot(8), loader(8), zfs(8), zfsboot(8), zfsloader(8), zpool(8)HISTORY
The zfsloader first appeared in FreeBSD 7.3.
AUTHORS
This manual page was written by Andriy Gapon <avg@FreeBSD.org>.
BSD September 15, 2014 BSD