I will provide the "start command", someone else can provide the parsing bit.
Note: I am not mirrored.
What to look for!
There are two columns labeled LP and PP. Here is can determine how many copies there are. If PP == LP, one copy; if PP is double LP - 2 copies, if PP is three times LP - then three copies of the data (not copies of the first copy, copies is the number of copies of data - 1, 2 or 3).
The magic command to start this is:
Last edited by MichaelFelt; 03-21-2013 at 01:42 PM..
Reason: updated to add -o flag - thanks to bakunin for the reminder!
Hello All,
I am a newbee in HP UX wanted to know how to configure DNS,NFS,NIS,LDAP and LVM(mirror,sparing and multipathing) in HP UX 11iv2 and v3 and i did go through some of the docs on hp.com but i think those are for experience UX users and i am new to this so if some one could just mention... (1 Reply)
I've looked a little but haven't found a solid answer, assuming there is one.
What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other... (3 Replies)
Hi all,
I have the following code:
if ; then echo 'folder not exist'; else echo 'folder exist'; fi
The "testing" folder is not exist in /home/batch , but thhe result is 'folder exist'. It seems that the code cannot detect that the folder "testing" not exist.
ANybody know the... (1 Reply)
Hi Guys,
I have a mirrored LVM volume, and wish to break the mirror leaving only copy1 (effectively removing copy 0).
Here's the config:
# lvs -a -o +devices
lvdata vg01 mwi-ao 2.19T lvdata_mlog 100.00 lvdata_mimage_0(0),lvdata_mimage_1(0)
vg01... (0 Replies)
Hello there ULF,
Good day! Just want to share my code and as well as my problem on why I'm not getting the output that I want. My original code was:
#!/usr/bin/sh
echo
echo -n "Please input an IP-Pool: "
read ip
echo
echo "Please wait....."... (8 Replies)
I apologize is this isn't an appropriate post for the 'advanced' UNIX, so please let me know if I should post this under UNIX for dummies, but here's my problem in a nutshell: I having problems creating a mirrored logical volume.
I have created two new physical volumes
... (2 Replies)
Hi
I am getting the following error while executing any command related to LVM -
# vgs
vgs: symbol lookup error: vgs: undefined symbol: pvcreate
Can any one please advise how to get rid of this problem?
Thanks (6 Replies)
Hi,
I have old server hp rp 3440 hp-ux 11.11. One mirrored disk is faulty. I need spesial patch PHKL_31216 and PHCO_30698, which give to correctly remove disk. Unfortunately I don't have access to hp support site. Please help me find it patch.
regards,Andre (0 Replies)
Hello,
I am trying to convert a single-drive Centos 7.2 installation with LVM into a two-disk mdadm mirror with mrrored LVM. I was able to follow the excellent instructions at:
http://www.dgoradia.com/creating-a-raid1-mirrored-on-an-existing-centos-on-lvm/and did create a two-disk mirror... (1 Reply)
Discussion started by: Clovis_Sangrail
1 Replies
LEARN ABOUT OSF1
volrootmir
volrootmir(8) System Manager's Manual volrootmir(8)NAME
volrootmir - Mirror areas necessary for booting to a new disk
SYNOPSIS
/usr/sbin/volrootmir [-a] [nconfig=count] target_disk [swap=target_partition]
OPTIONS
Specifies that all volumes on the system disk be mirrored, not just the root and swap volumes, rootvol and swapvol.
DESCRIPTION
The volrootmir script causes a mirror copy of areas of the root disk involved in booting to be made on the specified target disk.
When used without the -a option, volrootmir adds mirrors of the root and swap volumes and allocates them on the new disk. In addition, all
disk regions required for booting are set up and partitions for the new volume mirrors are created.
When used with the -a option, volrootmir mirrors all in-use partitions on the system disk.
To mirror a swap volume that is on a separate disk from the root volume, the swap attribute must be used to specify a separate target for
the swap mirror.
The target disk(s) must be at least as large as the sum of the sizes of rootvol and swapvol. Also, the physical disk should not have any
disk partition in use.
This script can be called from the voldiskadm menus by choosing the Mirror volumes on a disk operation.
ATTRIBUTES
Specifies the number of log copies and copies of the configuration database, for example, nconfig=2. Specifies that the swap volume,
swapvol, be mirrored on a separate disk, as specified by target_partition.
EXAMPLES
The following command mirrors the rootvol and swapvol volumes onto the target disk, dsk3. This command will fail if swapvol is on a differ-
ent disk from rootvol.
# volrootmir dsk3 The following command mirrors rootvol, swapvol, and any other volumes on the root disk onto the target disk, dsk3.
This command will fail if swapvol is on a different disk from rootvol.
# volrootmir -a dsk3 The following command mirrors rootvol on disk dsk3, swapvol onto partition dsk7d, and any other volumes on the
root disk onto disk dsk3. This command will fail if swapvol is on the same disk as rootvol.
# volrootmir -a dsk3 swap=dsk7d The following command mirrors rootvol onto disk dsk3 and swapvol onto partition dsk7d. This command
will fail if swapvol is on the same disk as rootvol.
# volrootmir dsk3 swap=dsk7d
SEE ALSO volintro(8), voldiskadm(8)volrootmir(8)