Script Checking LVM Mirror not Working Post: 302781045

10 More Discussions You Might Find Interesting

1. HP-UX

Configure DNS,NFS,NIS,LDAP and LVM(mirror,sparing and multipathing)

Hello All, I am a newbee in HP UX wanted to know how to configure DNS,NFS,NIS,LDAP and LVM(mirror,sparing and multipathing) in HP UX 11iv2 and v3 and i did go through some of the docs on hp.com but i think those are for experience UX users and i am new to this so if some one could just mention...

2. Solaris

ZFS Mirror versus Hardware Mirror

I've looked a little but haven't found a solid answer, assuming there is one. What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other...

3. Shell Programming and Scripting

The checking of folder existance is not working...

Hi all, I have the following code: if ; then echo 'folder not exist'; else echo 'folder exist'; fi The "testing" folder is not exist in /home/batch , but thhe result is 'folder exist'. It seems that the code cannot detect that the folder "testing" not exist. ANybody know the...

4. Linux

LVM - break mirror taking out orignal copy

Hi Guys, I have a mirrored LVM volume, and wish to break the mirror leaving only copy1 (effectively removing copy 0). Here's the config: # lvs -a -o +devices lvdata vg01 mwi-ao 2.19T lvdata_mlog 100.00 lvdata_mimage_0(0),lvdata_mimage_1(0) vg01...

5. Shell Programming and Scripting

My Script For Process Checking is NOT Working

Hello there ULF, Good day! Just want to share my code and as well as my problem on why I'm not getting the output that I want. My original code was: #!/usr/bin/sh echo echo -n "Please input an IP-Pool: " read ip echo echo "Please wait....."...

6. UNIX for Advanced & Expert Users

LVM mirror creation problem

I apologize is this isn't an appropriate post for the 'advanced' UNIX, so please let me know if I should post this under UNIX for dummies, but here's my problem in a nutshell: I having problems creating a mirrored logical volume. I have created two new physical volumes ...

7. HP-UX

What is the difference between DRD and Root Mirror Disk using LVM mirror ?

what is the difference between DRD and Root Mirror Disk using LVM mirror ?

8. Red Hat

[Solved] Problem while working with LVM

Hi I am getting the following error while executing any command related to LVM - # vgs vgs: symbol lookup error: vgs: undefined symbol: pvcreate Can any one please advise how to get rid of this problem? Thanks

9. HP-UX

Patch PHKL_31216 and PHCO_30698 HP-UX 11.11 for replace a LVM mirror boot disk

Hi, I have old server hp rp 3440 hp-ux 11.11. One mirrored disk is faulty. I need spesial patch PHKL_31216 and PHCO_30698, which give to correctly remove disk. Unfortunately I don't have access to hp support site. Please help me find it patch. regards,Andre

10. Linux

Centos 7.2 Convert single LVM to RAID Mirror Reinstall BootLoader

Hello, I am trying to convert a single-drive Centos 7.2 installation with LVM into a two-disk mdadm mirror with mrrored LVM. I was able to follow the excellent instructions at: http://www.dgoradia.com/creating-a-raid1-mirrored-on-an-existing-centos-on-lvm/and did create a two-disk mirror...

LEARN ABOUT DEBIAN

pvck

PVCK(8) 						      System Manager's Manual							   PVCK(8)

NAME

       pvck - check physical volume metadata

SYNOPSIS

       pvck [-d|--debug] [-h|--help] [-v|--verbose] [--labelsector] PhysicalVolume [PhysicalVolume...]

DESCRIPTION

       pvck checks physical volume LVM metadata for consistency.

OPTIONS

       See lvm for common options.

       --labelsector sector
	      By  default, 4 sectors of PhysicalVolume are scanned for an LVM label, starting at sector 0.  This parameter allows you to specify a
	      different starting sector for the scan and is useful for recovery situations.  For example, suppose the partition table is corrupted
	      or  lost	on  /dev/sda, but you suspect there was an LVM partition at approximately 100 MB.  This area of the disk may be scanned by
	      using the --labelsector parameter with a value of 204800 (100 * 1024 * 1024 / 512 = 204800):

	      pvck --labelsector 204800 /dev/sda

	      Note that a script can be used with --labelsector to automate the process of finding LVM labels.

SEE ALSO

       lvm(8), pvcreate(8), pvscan(8) vgck(8)

Sistina Software UK					 LVM TOOLS 2.02.95(2) (2012-03-06)						   PVCK(8)

10 More Discussions You Might Find Interesting

1. HP-UX

Configure DNS,NFS,NIS,LDAP and LVM(mirror,sparing and multipathing)

Discussion started by: coolsami

2. Solaris

ZFS Mirror versus Hardware Mirror

Discussion started by: Lespaul20

3. Shell Programming and Scripting

The checking of folder existance is not working...

Discussion started by: suigion

4. Linux

LVM - break mirror taking out orignal copy

Discussion started by: badoshi