Netapp iscsi lun Post: 302776099

10 More Discussions You Might Find Interesting

1. Solaris

Netapp filer LUN Resize. Commands to run on Solaris afterwards.

Hi, I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to...

2. Solaris

Can't see Netapp LUN on Solaris using LPFC after reboot.

Hi, I've just edited this post. I found the solution for this. Thanks.

3. AIX

Help growing iscsi lun

Hi, I have an iSCSI LUN of 200GB. I increased it to 250GB and when I try to increase the size of the vg, I'm getting an error that none of the volumes have increased in size. How can I get the OS to see the additional 50GB? ---------- Post updated at 03:22 PM ---------- Previous update...

4. Solaris

Set up iscsi LUN on solaris 9?

Hi, I need to set up iscsi LUN on Solaris 9. I've done it on Solaris 10 with iscsiadm. How do you do it on Solaris 9 though? Currently using Solaris 9 update 2. Your help is appreciated. Thanks, Sparcman

5. Solaris

Solaris10 -> iscsi -> equiliogic lun

We "lose" the iscsi device after a reboot - i.e., it appears in /dev/rdsk and /dev/dsk but format cannot find it. Obviously, it won't mount either. This happens for two separately defined luns. We must be missing a step in iscsiadm. The luns are defined as targets, we can see them in...

6. AIX

Any tips to grow iSCSI LUN

Hi, I have an iSCSI LUN attached to an AIX 5.3 box. It's initial size is 250GB, I just grew it on the SAN to 300GB, but AIX is not seeing the change. Right now I have some processes going and it's eating up the disk space. I need to grow this lun by atleast 30GB otherwise the process with bomb...

7. Red Hat

DM multipath :iscsi lun shows by diff names on two server where its exported

Hi, I am trying to setup multipathing (using DM multipath) for a redhat cluster setup ...all setup is done but issue is : node 1 shows the shared iscsi lun as sdc node 2 shows the same as sdg (changes on reboots) Due to this (i guess) i get i/o error & i can not read files created by...

8. Solaris

Make an iSCSI LUN clone bootable

trying to do this for a DR situation. I've cloned an iSCSI LUN to another server. I've created an LDOM on it. set the LDOM to auto-boot=false and exported the LUN as a raw disk to the new LDOM. After starting the LDOM and telnetting to it. I can get to the OK prompt and see the disk but when I try...

9. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the...

10. Linux

Identify newly attached LUN from NetApp

Hi I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o GNU/Linux I have first run the df -h and got the following: df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_outsystemdb-lv_root 50G 2.7G 45G ...

LEARN ABOUT HPUX

fcd_disable_mgmt_lun

fcd_disable_mgmt_lun(5) 					File Formats Manual					   fcd_disable_mgmt_lun(5)

NAME

       fcd_disable_mgmt_lun - select whether or not management luns are discovered in the legacy representation of mass storage devices

VALUES

   Failsafe
   Default
   Allowed values
       Enable discovery of management luns for array devices.

       Disable discovery of management luns for array devices.

   Recommended values
DESCRIPTION

       Management  luns  provide  the means to access the control ports of Fibre Channel disk arrays.  They are represented in both the legacy and
       the agile view of storage devices.  The legacy representation of a management lun is typically created under a separate	virtual  extension
       bus node.  The entry for a legacy management lun looks like this:

       On  a  system with a large number of storage devices connected, creation of management luns can result in an insufficient number of virtual
       extension buses for the legacy representation of data luns.  Since the number of extension buses on  a  system  is  limited  to	256,  luns
       requiring  virtual extension buses above 256 will be unusable through legacy device special files.  Disabling the discovery and creation of
       management luns will free up virtual extension buses for use by data luns.

       The default value for this tunable is

   Who Is Expected to Change This Tunable?
       System administrators who expect to use a large number of storage devices requiring more than 256 extension  buses  through  legacy  device
       special files.

   Restrictions on Changing
       Changes to this tunable take effect immediately.  However, existing management luns will not be removed.

   When Should the Tunable Be Turned On?
       This tunable should be turned on when the system runs out of extension buses for configuring the legacy representation of data luns.

   What Are the Side Effects of Turning the Tunable Off?
       None.

   When Should the Tunable Be Turned Off?
       When the functionality provided by the management lun is desired.

   What Are the Side Effects of Turning the Tunable On?
       Existing management luns in the legacy representation will show up in the state.

   What Other Tunables Should Be Changed at the Same Time?
       None.

WARNINGS

       All  HP-UX kernel tunable parameters are release specific.  This parameter may be removed or have its meaning changed in future releases of
       HP-UX.

       Installation of optional kernel software, from HP or other vendors, may cause changes to tunable  parameter  values.   After  installation,
       some  tunable  parameters may no longer be at the default or recommended values.  For information about the effects of installation on tun-
       able values, consult the documentation for the kernel software being installed.	For information about optional kernel  software  that  was
       factory installed on your system, see at

AUTHOR

       was developed by Hewlett-Packard Company.

SEE ALSO

       ioinit(1M), ioscan(1M), kctune(1M).

							     Tunable Kernel Parameters					   fcd_disable_mgmt_lun(5)