Sponsored Content
Operating Systems SCO Sco Openserver Starting TCP/IP Services Post 302774137 by jgt on Friday 1st of March 2013 08:30:58 AM
Old 03-01-2013
Failed network card.
Network cable not plugged in correctly.
Faulty port on the hub/concentrator.
Network speed not synchronized

Check all the cables, then power down and do a cold boot.
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO TCP/IP runtime System for SCO Unix

Hi everyone i have a question for all of you. It may be basic or it may be a good one. I recently aquired a copy of "SCO TCP/IP runtime System for SCO Unix" (thats what the disks say) and for the life of me i can not get it to load. i have tried opening the disk in linux and it can not determine... (0 Replies)
Discussion started by: Cerberus
0 Replies

2. UNIX for Dummies Questions & Answers

Starting sshd error messages SCO 5.0.6 openserver

Hi guys i'm trying to start sshd by doing this "/usr/local/sbin/sshd &" i'm getting this messages # This platform does not support both privilege separation and compression Compression disabled I loaded this 3 files 1-zlib- 1.1.40-vols... (2 Replies)
Discussion started by: josramon
2 Replies

3. IP Networking

stopping and starting network services

Solaris v5.6 how do you stop and start the network services? (4 Replies)
Discussion started by: Westy564
4 Replies

4. UNIX for Dummies Questions & Answers

SCO Openserver 6.0

Hi there guys. I just got this new SCO version and i'm having some problem printing from shell, This is what i'm typing at the # sign : lp -dHP /etc/hosts and it prints no problem but when i use any other user at the $ sign it gives me this error. /dev/fd/7: /usr/lib/lp/sysv/7: not found. ... (1 Reply)
Discussion started by: josramon
1 Replies

5. HP-UX

The server is not starting all services

Hi everybody When I Boot/restart my HP-UX server when it reaches the step described below doesn't go through. When I kick a key in the console it show me the login prompt and a can log on but I cannot access the server from the network, I can only do it via LAN console. Please, can you help... (3 Replies)
Discussion started by: cgege
3 Replies

6. UNIX for Dummies Questions & Answers

Starting & Stop print services in Unix

Hi There Kindly inform me on how to start and stop the print services in Unix from the command line. (2 Replies)
Discussion started by: esh
2 Replies

7. UNIX for Dummies Questions & Answers

Unix stopping the tcp services

Hi There We currently experiencing a problem on our Unix server Sco 5.07 , whereby the tcp services stops on it own and even if we restart the services manually the services still does not come up,We loose the printer and pc connections to the server we then need to restart the Unix server in... (1 Reply)
Discussion started by: esh
1 Replies

8. Solaris

Problem in connecting TCP services between 2 Solaris Servers

Hi, I have 3 solaris servers. Two servers of differnet network and one gateway. Server1 --> 192.168.0.1 --> Solaris 9 Server2 --> 10.27.40.2 --> Solaris 10 Server3 --> Iface1 --> 192.168.0.5 --> Solaris 10 --> Gateway Iface2 --> 10.27.40.5 Now I am able to ssh... (36 Replies)
Discussion started by: neel.gurjar
36 Replies

9. SCO

Starting up stunnel on SCO Openserver 5.0.7

Hi there I have compiled a binary of stunnel for SCO Openserver 5.0.7 At the moment the binary is in /u/testroom/sbin/stunnel as root I cd to /u/testroom/sbin and start the stunnel daemon up with ./stunnel The stunnel log shows when users successfully connect or disconnect, so... (1 Reply)
Discussion started by: The_Librarian
1 Replies

10. Linux

Application services not starting with server reboot

Hi All, My application uses three different sub-services to make complete application up and running to normal. The entry of all the three services are present in /etc/init.d directory with proper softlink created to application home path where it actually exists. In one rare case one of the... (3 Replies)
Discussion started by: hk_kamozalwar
3 Replies
APCSMART(8)						      Network UPS Tools (NUT)						       APCSMART(8)

NAME
apcsmart - Driver for American Power Conversion Smart Protocol UPS equipment NOTE
This man page only documents the hardware-specific features of the apcsmart driver. For information about the core driver, see nutups- drv(8). SUPPORTED HARDWARE
apcsmart should recognize all APC models that use a serial protocol at 2400 bps. This is primarily the Smart-UPS and Matrix-UPS lines, but some Back-UPS Pro models are also supported. Some older hardware may only report a handful of variables. This is usually not a bug - they just don't support anything else. CABLING
This driver expects to see a 940-0024C cable or a clone by default. You can switch to the 940-0095B dual-mode cable support with the cable= definition described below. If your 940-0024C cable is broken or missing, use this diagram to build a clone: http://www.exploits.org/nut/library/cables/940-0024C.jpg EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5): cable=940-0095B Configure the serial port for the APC 940-0095B dual-mode cable. sdtype=num Use shutdown type num, according to this table: 0: soft shutdown or powerdown, depending on battery status 1: soft shutdown followed by powerdown 2: instant power off 3: power off with grace period Modes 0 and 1 will power up the load when power returns. Modes 2 and 3 will keep the load turned off when the power returns. BUGS
Some older APC UPS models return bogus data in the status register during a front panel test. This is usually detected and discarded, but some other unexpected values have occasionally slipped through. AUTHOR
Russell Kroll SEE ALSO
The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/ NUT mailing list archives and information: http://lists.exploits.org/ Tue Oct 22 2002 APCSMART(8)
All times are GMT -4. The time now is 08:51 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy