As Zaxxon says, the first thing to check is the DNS service. The delay could be all caused by a very slow resolution process.
What happens if instead of
you enter
Do you still see the delay?
Otherwise, can you introduce a third system into this and see if you can tell which node is causing the problem?
Also, just noticed you are using 10.1.1.* ip addresses. Are you sure that your network knows that these ip's are local and not out in the big wide world?
I am having a strange problem...
I am trying to telnet into my Solaris m/c But it gives "Connection Closed "
Same with rlogin and rsh
But I can Login into ftp or do a finger to that m/c.
I have no hosts.allow or hosts.deny entries .
And also have one hostname in my local m/c .
Can anybody... (7 Replies)
After my previous thread, I think I found out what causes the long delays.
I run this program on several Linux computers, and the sometimes (after the file with the arrays becomes big) the fwrite takes between 100 ms to 900 ms.
This is very bad for me, as I want a timer to halt each 30 ms.... ... (5 Replies)
Hi ,
I have a Solaris 9 machine in which I can ftp but telnet/rsh/ssh is not working, although it was working before. I cannot also log in through the console. I get the banner for telnet but it kicks me out.
Any ideas?
rte (2 Replies)
We have three Oracle instances running on our Sun-Blade-T6300.
Telnet or SSH connection to one of the instance (or to user oramach) takes a lot of time whether using putty or SecureCRT but connection to any other user is very fast. Any idea what may be causing this slow connection to this... (5 Replies)
Hello,
like the title says, how can i measure the time it takes to load a module in Linux, and how how can i measure the time it takes to load a statically compiled module.
/Best Regards Olle
---------- Post updated at 01:13 PM ---------- Previous update was at 11:54 AM ----------
For... (0 Replies)
Dear experts
I have a 200MG text file in this format:
text \tab number
I try to sort using options -fd and it takes very long! is that normal or I can speed it up in some ways?
I dont want to split the file since this one is already splitted.
I use this command: sort -fd file >... (12 Replies)
When I am trying to login to a server using Putty ssh from my windows xp machine it is taking too much time for login.
My server name is http2 and when I enter this address into putty I immediately get
login as:
screen, but after I put my username root and enter the cursor moves downwards... (14 Replies)
Hi,
I wish to check the return value for wget $url.
However, some urls are designed to take 45 minutes or more to return.
All i need to check if the URL can be reached or not using wget.
How can i get wget to return the value in a few seconds ? (8 Replies)
Hello I have a LPAR AIX 6.1 on Power VM, Vio 2.2.3 and when I execute a rcp to this machine, I cant, simultaneosly, rlogin, telnet, rsh to this same LPARt. This commands stay hanged till the copy end, and Imeddiatlely the comand is executed (rlogin, telnet, rhs, etc).
Someone can give me... (1 Reply)
Discussion started by: artur_dietrich
1 Replies
LEARN ABOUT OSF1
rsh
rsh(1) General Commands Manual rsh(1)NAME
rsh - Executes the specified command at the remote host or logs into a remote host
SYNOPSIS
rsh [-dn] [-l user] remote_host [command] [argument...]
The remote shell command (rsh) executes command at the remote_host, or, if no command is specified, logs into remote_host.
OPTIONS
Turns on socket debugging (using setsockopt()) on the TCP sockets used for communication with the remote host. Specifies that rsh is to
log into the remote host as user instead of the local username. If this option is not specified, the local and remote usernames are the
same. Specifies that rsh is to ignore input from STDIN. Use this option if you put rsh in the background without redirecting its input
away from the terminal. If you do not use this option in this situation, rsh blocks even if no reads are posted by the remote command.
DESCRIPTION
The rsh command sends standard input from the local host to the remote command and receives standard output and standard error from the
remote command. If you do not specify a command, rsh executes rlogin instead.
If you do not specify the -l option, the local username is used at the remote host. If -l user is entered, the specified username is used
at the remote host. In either case, the remote host allows access only if at least one of the following conditions is satisfied: The local
user ID is not superuser, and the name of the local host is listed as an equivalent host in the remote /etc/hosts.equiv file. If either
the local user ID is superuser or the check of /etc/hosts.equiv fails, the remote user's home directory must contain a $HOME/.rhosts file
that lists the local host and username.
For security reasons, any $HOME/.rhosts file must be owned by either the remote user or the root user, and should have permissions set to
600 (read and write by owner only).
In addition to the preceding conditions, rsh also allows access to the remote host if the remote user account does not have a password
defined. However, for security reasons, use of a password on all user accounts is recommended.
While the remote command is executing, pressing the Interrupt, Terminate, or Quit key sequences sends the corresponding signal to the
remote process. However, pressing the Stop key sequence stops only the local process. Normally, when the remote command terminates, the
local rsh process terminates.
To have shell metacharacters interpreted on the remote host, place the metacharacters inside (double quotes). Otherwise, the metacharac-
ters are interpreted by the local shell.
RESTRICTIONS
The rsh command is confused by output generated by commands in a file on the remote host. In particular, the messages, where are you? and
stty: Can't assign requested address can result if output is generated by the startup file.
EXAMPLES
In the following examples, the local host host1 is listed in the /etc/hosts.equiv file at the remote host host2. To check the amount of
free disk space on the remote host host2, enter: $ rsh host2 df To append a remote file to another file on the remote host, place the >>
metacharacters in (double quotes): $ rsh host2 cat test1 ">>" test2 To append a remote file at the remote host to a local file, omit the
double quotes: $ rsh host2 cat test2 >> test3 To append a remote file to a local file and use a remote user's permissions at the remote
host, use the -l option: $ rsh host2 -l jane cat test4 >> test5
FILES
Specifies remote hosts from which users can execute commands on the local host (provided these users have an account on the local host).
Specifies remote users that can use a local user account.
SEE ALSO
Commands: rcp(1), rlogin(1), rshd(8), telnet(1)
Functions: rexec(3)
Files: rhosts(4)rsh(1)