I'm in the process of migrating a system to some newer hardware (Power 5 to Power 7). I've done these migrations in the past, and have not had any problems. But this system does not see the new network controllers on the Power 7 system. The system was running AIX 5.3 before, I've upgraded it to AIX 6.1 TL6 which is the latest supported TL that the software I need to run supports.
When I run a cfgmgr, I get a message saying that the following packages are missing. I'm assuming this is what is stopping the network cards from being detected. But I cannot find these packages anywhere.
Can someone point me in the right direction on where I can find and install these packages?
Thanks.
Last edited by acascianelli; 02-19-2013 at 01:33 PM..
Reason: SOLVED
Please, I'm From Argentina, And I Need To Know If The Drivers Of Program Unix, Version 5.01 Is Compatible Whit Drivers Of The Printer Epson Fx-2190
Thanks, And I Hope Yuor Answer. (0 Replies)
I was hoping someone ould help me with the following.
I have 2 files in a directory FILEA and FILEB. i am running a process on these 2 files but before the process can run both FILEA and FILEB need to be present.
If one or both the files are missing i need to know what file(s) is(are)... (10 Replies)
So, I've got a ton of files that I want to go through (ie something like 300,000), and they're all labeled sequentially. However I'm not 100% positive that they are all there.
Is there any way of running through a sequence of numbers, checking if the file is in the folder, if not appending it... (2 Replies)
Hello
I am new to Perl, in fact I am on chapter one of the book. :) However I am in need of a Perl Script faster than I can finish the book. Perhaps someone can help me with my immediate need while I read my book.
I have a directory with hundreds of files that are all named like... (4 Replies)
I have a need to compare 2 files, then print results to file. Need to find items from file2 that are not found in file 1. thanks in advance!
example:
file 1:
abcde=12
fffff=6
bbbb=35
file2:
abcde=12
fffff=6
bbbb=35
ccccc=10
kkkkk=45 (8 Replies)
I have a list containing strings. All strings should have either "smp" or "drw" else it is considered an error. I have written this code below. Any better ideas to tackle this?
set fdrw = 0
set fsmp = 0
foreach f ($Lst)
set fdrwtag = `echo $f | awk '/drw/'`
set fsmptag = `echo $f | awk... (1 Reply)
Hello,
This is a programming question as well as a suse question, so let me know if you think I should post this in programming.
I have an application that I compiled under opensuse 12.2 using g77-3.3/g++3.3. The program compiles and runs just fine. I gave the application to a colleague who... (2 Replies)
I am trying to install VirtualBox on RHEL 5 but I need the 32 bit version for 32 bit Windows. When I run yum I get the following:
sudo yum localinstall /auto/spvtg-it/spvss-migration/Software/VirtualBox-4.3-4.3.2_90405_el6-1.i686.rpm
Loaded plugins: fastestmirror
Setting up Local Package... (13 Replies)
I have a fixed width file. The records looks something similar to below:
Type ID SSN NAME .....AND SOME MORE FIELDS
A1 1234 .....
A1 1234 .....
B1 1234 .....
M2 4567 .....
M2 4567 .....
N2 4567 .....
N2 4567 .....
A1 9999
N2 9999
Now if A1 is present then B1 has to be present.... (2 Replies)
Discussion started by: Saanvi1
2 Replies
LEARN ABOUT SUNOS
pmconfig
pmconfig(1M) System Administration Commands pmconfig(1M)NAME
pmconfig - Configure the Power Management system
SYNOPSIS
/usr/sbin/pmconfig [-r]
DESCRIPTION
The pmconfig utility sets the Power Management and suspend-resume configuration. User has permission to change Power Management configu-
ration using pmconfig only if he is allowed to do so according to PMCHANGEPERM keyword of /etc/default/power. User has permission to change
the suspend-resume configuration using pmconfig only if he is allowed to do so according to the CPRCHANGEPERM keyword of
/etc/default/power. See FILES section below for a description of the PMCHANGEPERM and CPRCHANGEPERM keywords of /etc/default/power.
Based on user permissions, pmconfig first resets the Power Management and/or suspend-resume state back to its default and then reads
the new Power Management and/or suspend-resume configuration from /etc/power.conf and issues the commands to activiate the new configu-
ration. The pmconfig utility is run at system boot. This utility can also be run from the command line after manual changes have been made
to the /etc/power.conf file. For editing changes made to the /etc/power.conf file to take effect, users must run pmconfig.
The preferred interface for changing Power Management and suspend-resume configuration is dtpower(1M).
OPTIONS
The following options are supported:
-r Reset Power Management and suspend-resume state to default and exit. User must have both Power Management and suspend-resume
configuration permission for this option.
EXIT STATUS
The following exit values are returned:
0 Upon successful completion
>0 An error occurred
FILES
/etc/power.conf System Power Management configuration file
/etc/default/power File that controls permissions for system's Power Management and suspend-resume features. The PMCHANGEPERM key-
board controls the Power Management configuration permissions, while the CPRCHANGEPERM keyword controls the sus-
pend-resume configuration permissions.
Allowed values are:
all Any user can change the configuration.
- No one except super-user can change the configuration.
<user1, user2,...> A user in this user list or a super-user can change the configuration. The user list is a space and/or comma (,)
separated list. You must enclose the list in < and > characters.
console-owner A user who owns the system console device node or a super-user can change the configuration.
The default values are PMCHANGEPERM=console-owner and CPRCHANGEPERM=console-owner.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpmu |
+-----------------------------+-----------------------------+
|Interface stability |Unstable |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), powerd(1M), power.conf(4), svcadm(1M), attributes(5), smf(5), cpr(7), pm(7D)
Using Power Management
NOTES
The pmconfig service is managed by the service management facility, smf(5), under the service identifier:
svc:/system/power:default
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
DIAGNOSTICS
If the program cannot open the configuration file, it prints an error message to standard error. If the program encounters a syntax error
in the configuration file, it prints an error message and the line number of the error in the configuration file. It then skips the rest
of the information on that line and processes the next line. Any configuration information already processed on the line containing the
error is used. If user does not have permission to change Power Management and/or suspend-resume configuration, and configuration file has
entries for which user doesn't have permission, it process the entries for which user has permissions and prints error on rest.
SunOS 5.10 12 Aug 2004 pmconfig(1M)