I am using the below code to ping a code and print whehter the connection is successful or not.
For one IP address.. I received the status as "Fail" . But when tried using start->run-> cmd ->ping ipaddress .. the ping is successful.
COuld you let me know any other alternative code to ping the device.
---------- Post updated at 06:57 AM ---------- Previous update was at 06:50 AM ----------
Hi all,
I am using the below code to ping a code and print whehter the connection is successful or not.
For one IP address.. I received the status as "Fail" . But when tried using start->run-> cmd ->ping ipaddress .. the ping is successful.
COuld you let me know any other alternative code to ping the device.
I need a script to open a text file with ip's in it, ping them, split the results into the ip and time from the results and e-mail them ?
here what i've done.
its porbly wrong and not workin.its for win nt4
use Net::SMTP;
# get list of ip's to ping
open (PINGFILE, "< c:\\Documents and... (20 Replies)
Hi,
PLMN=APPLE
awk ' /is missing/ { flag=1;print > "fruit_output_m1.txt" }
END {
if( flag != 1 )
print "No $PLMN in the store." > "fruit_output_n1.txt"
} ' fruit_result.txt
The output is:
No $PLMN in the store.
Should be:
No APPLE in the store.
Please help!! (1 Reply)
I would like my script to be able to tell the difference between to lines of input, like:
Input 1:
1 2 3 4 5
Input 2:
1 2 3 4 5 6
I want the script to tell me that the difference between the two lines is the 6. Is there anyway I can have it do this?
Here's an example of what my script... (12 Replies)
Dear All
Any one able been writing any command ping in perl??basically i want to wring ping script to send 1000 packet ping then initiate "Ctrl C' terminal to ping example below:-]
#!/usr/local/bin/perl
$r=`/bin/ping 172.23.11.254`;
Thank You
---------- Post updated at 10:27 PM ----------... (2 Replies)
Hi All
i have an issue with ping, we are using dhcp and so if the machine has been offline and i ping it, i get " ping: unknown host <hostname>
is there a way i can stick a loop somewhere so it would keep trying when it got the unknown host error and then when the machine came back online... (2 Replies)
Hi There
i have little situation that i could us some help with. We have a dhcp server, but the problem is if that a machine has been offline for a while it loose it's lease and so if you ping it you get unknown host
if there a way using perl that it will continue to try and ping it, even tho... (1 Reply)
Hi All, I am trying to aggregate the NIC's,(igb2 and igb3) (igb0 is used by the physical system and igb1 is used by primary-vsw0) to create the domains on that for faster data transfer, I followed the process for creating the aggregation, dladm create-aggr -d igb2 -d igb3 1
after creating the... (2 Replies)
Hello all,
I am writing a script that pings various machines to check connectivity.
If a machine is available, the prompt returns a result immediately:
root@ops # ping 172.21.5.5
172.21.5.5 is alive
BUT
if a machine is Down , the reply takes a long time to come. The issue is I want to... (1 Reply)
I still haven't had chance to read the entire Debian manual, which I promise I will do as soon as I can, and I will start putting info back into this forum.
However, for the mean time, could someone please help with a small script? I understand what I've got to do and how to do it, but I'm... (13 Replies)
Discussion started by: MuntyScrunt
13 Replies
LEARN ABOUT DEBIAN
mrtg-ping-probe
MRTG-PING-PROBE(1) General Commands Manual MRTG-PING-PROBE(1)NAME
mrtg-ping-probe - ping probe module for Multi Router Traffic Grapher
DESCRIPTION
mrtg-ping-probe is a ping probe module for MRTG 2.x. It is used to monitor the round trip time and packet loss to networked devices. MRTG
uses the output of mrtg-ping-probe to generate graphs visualizing minimum and maximum round trip times or packet loss.
mrtg-ping-probe is not run directly, but is called by MRTG as a helper when it needs to determine ping time to a host.
Act responsibly: do not use mrtg-ping-probe to ping devices without the owner's permission. Just imagine if 10,000 people decided to ping
your hosts! mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.
OPTIONS
To use mrtg-ping-probe you need to configure MRTG to call it from within the definition of a target host. This is done in the MRTG config
file, which is usually /etc/mrtg.conf.
Here's an example snippet: change the target name and IP address to suit your needs.
Target[your.target.ping]: `/usr/bin/mrtg-ping-probe 123.456.789.123`
SetEnv[your.target.ping]: MRTG_INT_IP="123.456.789.123" MRTG_INT_DESCR="ping"
MaxBytes[your.target.ping]: 100
AbsMax[your.target.ping]: 200
Options[your.target.ping]: gauge, growright
YLegend[your.target.ping]: ping time (ms)
ShortLegend[your.target.ping]: ms
Legend1[your.target.ping]: Maximum Round Trip Time in ms
Legend2[your.target.ping]: Minimum Round Trip Time in ms
Legend3[your.target.ping]: Maximal 5 Minute Maximum Round Trip Time in ms
Legend4[your.target.ping]: Maximal 5 Minute Minimum Round Trip Time in ms
LegendI[your.target.ping]: Max:
LegendO[your.target.ping]: Min:
Pay close attention to the backticks in the first line which tell MRTG to execute the nominated external program. Note also that you need
to use the "gauge" option, since the results of subsequent ping probes are independant values and not an incrementing counter.
SEE ALSO mrtg(1).
The latest release of mrtg-ping-probe can be found on the web at http://pwo.de/projects/mrtg/
AUTHOR
This manual page was written by Jonathan Oxer <jon@debian.org>, for the Debian project (but may be used by others).
April 14, 2003 MRTG-PING-PROBE(1)