Hi all,
I am running an oracle application server but the problem is that the default port it is using is 7777 and if i want to make it port 80 i have to run the server as root which something i do not want to do. If i understand well to run on a port under 1024 the application needs root... (1 Reply)
Dear All..
I have an HP-UX server, i need to access it through certain port to run application.., but i cant access it,
I can login as root by using other port
Can anyone give me any advice how to see the list of active port? and how to block / unblock it??
Thankyou in advance
... (1 Reply)
Dear Expects,
I am facing following discrepancies on our server.
a) When we give wrong root password three times in a row, the root account has been disabled.
b) System is forced to change the old password, whenever we tried to change the password of any of the OS user and for ROOT user... (2 Replies)
Setup a site to site VPN between two cisco routers.
One of the site locations is unable to access ports such as https://example.com:9001
How do I let them go into port 9001?
They can ssh, ftp, telnet and everything else.
Is this a VPN issue or ACL access issue?
I put
permit ip host... (0 Replies)
Hi Guys,
Some of the websites are blocked in my office. And I know the root password.
I tried to unblock those sites.. Checkedcd /etc/modprobe.d
$ cat blacklist.conf
#
# Listing a module here prevents the hotplug scripts from loading it.
# Usually that'd be so that some other driver will... (8 Replies)
Hi,
I am trying to establish vpn between my linux server and cisco asa at client side.
I installed openswan on my cent os.
Linux Server
eth0 - 182.2.29.10
Gateway - 182.2.29.1
eth1 - 192.9.200.75
I have simple IPtables Like
WAN="eth0"
LAN="eth1" (0 Replies)
Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? "
A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that... (0 Replies)
Hi @all,
I try to connect 2 LANs with IPSec/Openswan
LAN 1: 192.168.0.0/24
LAN 2: 192.168.1.0/24
This is my Config:
conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ... (1 Reply)
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT CENTOS
iptables-xml
IPTABLES-XML(1) iptables 1.4.21 IPTABLES-XML(1)NAME
iptables-xml -- Convert iptables-save format to XML
SYNOPSIS
iptables-xml [-c] [-v]
DESCRIPTION
iptables-xml is used to convert the output of iptables-save into an easily manipulatable XML format to STDOUT. Use I/O-redirection pro-
vided by your shell to write to a file.
-c, --combine
combine consecutive rules with the same matches but different targets. iptables does not currently support more than one target per
match, so this simulates that by collecting the targets from consecutive iptables rules into one action tag, but only when the rule
matches are identical. Terminating actions like RETURN, DROP, ACCEPT and QUEUE are not combined with subsequent targets.
-v, --verbose
Output xml comments containing the iptables line from which the XML is derived
iptables-xml does a mechanistic conversion to a very expressive xml format; the only semantic considerations are for -g and -j targets in
order to discriminate between <call> <goto> and <nane-of-target> as it helps xml processing scripts if they can tell the difference between
a target like SNAT and another chain.
Some sample output is:
<iptables-rules>
<table name="mangle">
<chain name="PREROUTING" policy="ACCEPT" packet-count="63436" byte-count="7137573">
<rule>
<conditions>
<match>
<p>tcp</p>
</match>
<tcp>
<sport>8443</sport>
</tcp>
</conditions>
<actions>
<call>
<check_ip/>
</call>
<ACCEPT/>
</actions>
</rule>
</chain>
</table> </iptables-rules>
Conversion from XML to iptables-save format may be done using the iptables.xslt script and xsltproc, or a custom program using libxsltproc
or similar; in this fashion:
xsltproc iptables.xslt my-iptables.xml | iptables-restore
BUGS
None known as of iptables-1.3.7 release
AUTHOR
Sam Liddicott <azez@ufomechanic.net>
SEE ALSO iptables-save(8), iptables-restore(8), iptables(8)iptables 1.4.21 IPTABLES-XML(1)