When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
I've got an RS6K B50, and i've installed AIX 5.3, TL5. It installs fine, the only customisations i make to the BOS are to change the locale / keyboard layout to UK, and to choose not to install graphical software.
I have no video card in this box, and i connect via a serial console (null modem... (4 Replies)
Hi all,
I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console .
Both the IP adresses of the server and the console are in a private network (address 10.67.xxx).
For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that... (2 Replies)
Hi guys,
Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot.
The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
To All:
I have this AIX machine (see boot process below). The problem was it hangs at:
The ctrmc Subsystem has been started. Subsystem PID is 11906..
I checked with other forums but their advise were just "strong punches in the air" with no specific explanation.
I really appreciate if... (6 Replies)
Boot process hangs after reaching the following line:
Adding 5853176k swap on /dev/mapper/mch-swap_1. Priority:-1 extents:1 across:5853176kUsing knoppix 6.2 as LiveCD, and mounting the partitions, I got the following:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s... (0 Replies)
Hi all,
We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Got a strange problem.
I have 4 Solaris servers all configured the same, Solaris 10 x86 update 10.
When I try to ssh from one Solaris 10 server to another server ssh hangs.
I have an identical server and when I try this everything works fine.
The weird thing is if I am root on the server... (1 Reply)
Hi Guys,
I have a SunBlade 1500 which I use to practice at home. Suddenly when I power on the server it just displays the solaris banner and Boot device: disk File and args: Then it stops and says " rebooting with command: boot"
It doesn't boot to the kernel. Is there anyway I can possibly... (5 Replies)
Discussion started by: cjashu
5 Replies
LEARN ABOUT DEBIAN
cdde.xml
cdde.xml(5)cdde.xml(5)NAME
cdde.xml - Configuration file for cdde
DESCRIPTION
When cdde is run for the first time, an example xml configuration file (~/.cdde.xml) is created for you:
<?xml version="1.0"?>
<cdde delay="5000000">
<drive path="/dev/cdrom">
<audio command="echo An audio cd was inserted."/>
<data command="echo A data cd was inserted."/>
<dvd command="echo A dvd was inserted."/>
<vcd command="echo A vcd was inserted."/>
<svcd command="echo A svcd was inserted."/>
<blank command="echo A blank cdr/dvdr was inserted."/>
<mixed command="echo A mixed (audio/data) cd was inserted."/>
</drive>
</cdde>
This default file is not very useful, and so I suggest you to edit it to your needs before running cdde again. You may add as many drive
entries, or commands as you like. If multiple entries are found for a type of disc then all entries will be run in the order they are
found.
The specific device in use can be passed to the command with one of the following special tags:
%dev% - is replaced with the device name of the cdrom that
just had a disc inserted
%mnt% - is replaced with the listed mount point for the
cdrom that just had a disc inserted
Note: %mnt% is determined through your fstab (usually located in /etc) file. If you do not have a listing for each <drive> in the fstab
this will cause problems.
This way, you can tell your video player which device to use when playing a VCD, for example.
EXAMPLE
This is an example of ~/.cdde.xml file:
<?xml version="1.0"?>
<cdde delay="5000000">
<drive path="/dev/cdroms/cdrom0"/>
<audio command="xmms %mnt%"/>
<data command="mount %mnt%"/>
<dvd
command="xterm -iconic -e mplayer -fs -xineramascreen 1 -dvd 1"/>
<vcd
command="xterm -iconic -e mplayer -fs -xineramascreen 1 -vcd 1"/>
<svcd
command="xterm -iconic -e mplayer -fs -xineramascreen 1 -vcd 1"/>
<blank command="gcombust"/>
<mixed command="mount %mnt%"/>
</drive>
</cdde>
FILES
~/.cdde.xml
SEE ALSO cdde(1)AUTHORS
Eric Lathrop <eric@ericlathrop.com>
Stanislav Maslovski <stanislav.maslovski@gmail.com>
WEBSITE
For the latest release of cdde, see:
http://cdde.sourceforge.net/
Eric Lathrop 0.3.1 cdde.xml(5)