I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system
and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which is like this:
Whereas the c1d1s7 is visible in format o/p.
Please help me how to proceed on this.
Thanks
Laxxi
Last edited by Scrutinizer; 01-23-2013 at 08:01 AM..
Reason: code tags
Hi Guys,
Need to add 2 disks into a JBOD array (3310).
Does anyone see anything wrong with my Procedure / Doco below?
1> Logon to system, check system logs for abnormal entries.
2> Make backups of related system files:
A>cp -p /etc/system /etc/system.backup.081505
B>cp -p /etc/vfstab... (3 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Hi all,
we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this?
In the past we have always kept slice 7 free -... (8 Replies)
Really sorry for the long posting. But i would really want to clear all the doubts.
I have 2 disk c0t0d0 & c0t1d0, i wanted to mirror c0t1d0 (mirror) to c0t0d0 (main).
Creating state database replica:
metadb -a -c3 -f c0t0d0s7
... (3 Replies)
Hello All,
I am trying to mirror two non-root hard drives using zfs. But "fmthard" fails when I try to copy the vtoc due to disk mismatch. Please help me.
--- iostat command shows the disk to be similiar
--- format command shows disk to be different :confused:
--- c1t2d0 is the active... (8 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
We have two node cluster with OS disk mirrored under SVM. There is slight disk problem on one of the mirror disk causing cluster to panic.
Failure of one mirror disk causing VCS to panic the node. Why VCS is not able to write /var filesystem, as one of the disk is healthy.
... (1 Reply)
Discussion started by: amlanroy
1 Replies
LEARN ABOUT OSF1
volreattach
volreattach(8) System Manager's Manual volreattach(8)NAME
volreattach - Reattaches disk drives that have once again become accessible
SYNOPSIS
/usr/sbin/volreattach [-rb] [accessname...]
/usr/sbin/volreattach -c accessname
OPTIONS
The volreattach utility has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
failed disk. Performs the reattach operation in the background. Checks whether a reattach is possible. No operation is performed, but the
name of the disk group and disk media name at which the disk can be reattached is displayed.
DESCRIPTION
The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.
This operation may be necessary if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
Storage Manager is started, causing disks to enter the failed state.
If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as long as the
reattach happens before any volumes on the disk are started.
The volreattach command is called from the voldiskadm menus as part of disk recovery.
The volreattach utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.
EXIT CODES
A zero exit status is returned if it is possible to perform a reattach. Otherwise, non-zero is returned.
SEE ALSO volintro(8), voldiskadm(8), volrecover(8)volreattach(8)