Hi all
I have a shell script that uses a stored proc to generate output from some tables and send the same in an e-mail using mailx command. Now I need to convert the output to excel format and send e-mail. How can I achieve this. Please help me in this regard, as it's very urgent and I have been... (5 Replies)
Hi,
I am using mailx command to send a mail with attachment. It's working fine, but with attachment I am getting one extra attachment like (ATT00131.txt). I have tried to use unix2dos command also. But still I am getting the extra attachment.
I am using the following code:
subject="temp... (5 Replies)
Hi All,
Can you please help me in solving this. I am facing some problem sending mails.
If I use like this, I am able to send mail the mail
echo "This is an automated e-mail; please do not reply." | mailx -s "Good Morning ." 'abc@xys.com'
But if I use like this, then I am unable to send... (1 Reply)
Hi,
Our requirement is to send an attachment and content in a single mail. I am using the below command to send attachement.
---------------------
(uuencode $exp_file $exp_file) |mailx -s "$email_subject" $EmailRecipients
--------------------
I m not able to send any message in the... (4 Replies)
i have sun machines having solaris 9 & 10 OS . Now i need to send mail from the machines to my outlook account . I have the ip adress of OUTLOOK mail server. Now what are the setting i need to do in solaris machines so that i can use mailx or sendmail.
actually i am trying to automate the high... (2 Replies)
Hi,
I am using solaris 5.9 OS and I am facing an issues with mailx.
My SMTP port is configured to listen 6190 and not the default one which is 25. I can send mail to my inbox when i do it manually through the following steps
root@<dbname> # telnet 15.12.88.10 6190
Trying 15.12.88.10...... (0 Replies)
Hi All,
I am using mailx to send the mail. Due to some changes in the requirement, I need to send the mail to CC only (an Email id in CC), with no email ID in "TO" field. Can we do that? bcz I used -c flag only and got the message:":The flags you gave make no sense since you're not sending... (2 Replies)
I have to send a couple of rows that have been returned from a SQL query. I have written the output of the query to a file and while i try to print this in the mail body the formatting goes wrong.
Intended Output in mail body:
Col1 Col2 Col3
------ ... (2 Replies)
I am unable to cause the 'mail' command to send mail from my linux ubuntu 15.10 computer. File 'mail.log' typically reports Connection timed out.
I issue the command:
mail -s "my subject" recipient@domain.com < filenamewhere filename is a file containing my message.
Specifically, the... (3 Replies)
I am having trouble getting mail to work on a red hat server. At first I was getting this message.
Diagnostic-Code: X-Postfix; delivery temporarily suspended: connect to :25: Connection refused
Then added the port to my firewall. Then I temporarily turned off selinux. I then copied this file... (1 Reply)
Discussion started by: cokedude
1 Replies
LEARN ABOUT OPENSOLARIS
sockd.route
SOCKD.ROUTE(5) File Formats Manual SOCKD.ROUTE(5)NAME
sockd.route - Route file for multi-homed SOCKS proxy server
SYNOPSIS
/etc/sockd.route
DESCRIPTION
The file /etc/sockd.route is used by the SOCKS server program sockd to determine which of its network interfaces it should use to reach a
given destination host. It is needed only if your SOCKS server host is multi-homed and your version of sockd supports RBIND. A multi-homed
host is a host with more than one network interfaces and with its IP_FORWARDING turned off. Only the multi-homed version of sockd can be
run on such hosts. You can find out the version of your sockd (or rsockd) by command
sockd -ver
or
rsockd -ver
A line in the file can be up to 1024 characters long. Lines starting with a `#' are comments. Non-comment lines must be of the form
if_addr dst_addr dst_mask
All three fields are required and are separated by spaces or tabs. Each filed is specified in the usual dotted form of IP addresses, e.g.,
128.23.16.2. if_addr must be the IP address of one of the network interfaces on the SOCKS server host. dst_addr specifies either the IP
address of a host, a network, or a subnet in the usual dotted form, e.g., 129.201.4.0, or a domain name, e.g., internic.net. dst_mask spec-
ifies mask for the IP address used in dst_addr. Bits in dst_mask that are set to 0 indicate the bit positions to be ignored during compar-
ison of IP addresses. So, specifying 255.255.255.255 in dst_mask demands an exact match with dst_addr, whereas 0.0.0.0 in dst_mask causes a
matching with any given destination address regardless of what is specified for dst_addr. If a domain name is used for dst_addr, the con-
tents of dst_mask are ignored, though it must still be supplied (simply use 0.0.0.0). If the domain name starts with a period, it speci-
fies a zone and matches all domain names within that zone, otherwise it matches only the domain name itself. For example, xyz.com matches
only xyz.comP, while .xyz.com macthes not only xyz.com, but also abc.xyz.com and this.and.that.xyz.com, among others. The special symbol
ALL (which must be entirely in uppercase) matches everything. Domain names are otherwise case-insentive.
When using a domain name in dst_addr, you have be very careful in maintaining your DNS setup. See the last few paragraphs in sockd.conf(5).
When a multi-homed sockd receives a network request, it first checks with /etc/sockd.fc (or /etc/sockd.conf) to decide whether the request
should be allowed or denied. For an allowable request, sockd then checks the given destination IP address or domain name against the
dst_addr dst_mask pair in /etc/sockd.route, one line at a line. Once a match is found, the network interface of the corresponding if_addr
field is used for connection to the destination host. Remaining lines in the file are skipped. Therefore the order of the lines in the
file is of extreme importance. If no match is found throughout the file, a line indicating the error is produced using syslog with facility
daemon and level err and the request is ignored.
You have the option of using the frozen route file /etc/sockd.fr instead of /etc/sockd.route. The frosen file is produced by make_sockdfr
and is essentially the memory image of the parsed route file. Using it can reduce the start-up delay of the SOCKS server since it eliminate
the need for parsing. Since the SOCKS server always looks for /etc/sockd.fr first, be sure that you always run make_sockdfr every time
after you modifify /etc/sockd.route.
EXAMPLES
Suppose you have a dual-homed host with interface 129.1.2.3 connecting to your internal Class B network 129.1, and interface 129.1.254.1
connecting to the outside world. If you only use the SOCKS server to provide connections to outside hosts, then the file /etc/sockd.route
only needs one line:
129.1.254.1 0.0.0.0 0.0.0.0
If you also use the SOCKS server to provide connection to internal hosts as well, then two lines would suffice:
129.1.2.3 129.1.0.0 255.255.0.0
129.1.254.1 0.0.0.0 0.0.0.0
Note that these two lines must be in the order given above.
If you prefer using domain name instead, the lines should be
129.1.2.3 .myown.com 0.0.0.0
129.1.254.1 0.0.0.0 0.0.0.0
assuming that myown.com is your domain.
SEE ALSO dump_sockdfr(8), make_sockdfr(8), sockd(8), sockd.fr(5)
May 6, 1996 SOCKD.ROUTE(5)