I have a script that connects to remote servers using a public key. Some of the servers are not set up for the public key and I receive the following when I attempt to ssh: The authenticity of host 'XXX' can't be established.
RSA key fingerprint is... (1 Reply)
Hi,
Not sure if this is possible, I have a server (SERVER1) that is currently set up as a remote SSH host. My client SSH host (SERVER2) is connecting to SERVER1 to scp a file with no password.
I now have a need to set up a third server (SERVER3) as a remote SSH host and I need SERVER1 as a... (4 Replies)
I have written the following script to update some Debian boxes.
#!/bin/bash
mxg_hosts_file="/etc/mxg/ssh-hosts"
while read line ; do
mxg_host="$(echo ${line} | awk -F":" '{print $1}')"
mxg_port="$(echo ${line} | awk -F":" '{print $2}')"
echo "Connecting and Upgrading... (3 Replies)
Hi All,
I need to prepare a script.
Description:
Currently i am in server "x(ubuntu os)", here i need to develop a script to ssh to another server "y(ubuntu os)", i have password less authentication to "y". i have done the below
#!/bin/bash
#ssh to the server "y" and confirming i am... (2 Replies)
Hi,
I have two SunOs sparc servers mac1 and mac2.
I have exchanged keys between them inorder to passwordless login ssh from mac1 to mac2.
However, it is failing after authentication.
Part of the debug is as below. Please suggest whats wrong and how do i fix that!! Note: i do not have... (1 Reply)
Hi ,
I am trying to read a list of hosts from a config file and trying to get file list from that host. For this I have used one while loop.
cat "$ARCHIVE_CFG_FILE" | sed '/^$/d' | sed '/^#/d' | while read ARCHIVE_CFG
do
SOURCE_SERVER_NAME=`echo "$ARCHIVE_CFG" | awk -F '|' '{ print... (2 Replies)
Team,
Presently I have 5 ip address kept in ip_abc1 file, for each of the ip address listed, i need to login on each ipaddress
one at a time and login as below for that specific ip address
ssh -p 8101 karaf@<ip.address_for the specific ip address as logged in>
password
features:list... (4 Replies)
Hello I am writing a script in a local machine, i am using ssh, here i am not able to using back ticks & input file to while loop. here is my script
ssh -q server1
a=`ps -ef | grep ccms | awk {print $1}`
b=`ps -ef | grep mss | awk {print $1}`
# above lines are not working, so i redirected... (12 Replies)
If I am running a bash command, and some awk getting the ethernet adapter on the local machine. It works fine. But if I will run it from the remote, it is EMPTY on echo and throwing error in grep.
Thank you
This work perfectly fine
$ f=`/sbin/ip a|grep 127.127 | awk '{print $NF }' ` ; ip... (2 Replies)
Discussion started by: kenshinhimura
2 Replies
LEARN ABOUT ULTRIX
ntp.conf
ntp.conf(5) File Formats Manual ntp.conf(5)Name
ntp.conf - Network Time Protocol configuration file
Description
The file is the configuration file for the Network Time Protocol (NTP) daemon, This file must be configured on your system before running
Any host names that you specify in the file must have an entry in the file, or an entry in the master database, if the database is being
served to your system by BIND/Hesiod or Yellow Pages.
The file has four entry formats:
trusting no
This entry guarantees that your system synchronizes only to the NTP servers identified in the peer and server entries specified. Dig-
ital recommends that all systems include the entry.
peer server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system may also provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP servers should be configured with entries.
server server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system can not provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP clients should be configured with entries.
peer /dev/null LOCL 1 -5 local
This entry identifies your system as a local reference clock. A local reference clock is the most accurate system clock available at
your site. If you receive time synchronization from the Internet NTP service, you should not include this entry on any of your sys-
tems. At most, one system in a set of nodes running should be identified as a local reference clock.
A host which specifies this entry should not specify any or entries.
Examples
This is a sample configuration file for an NTP client which receives time synchronization from the NTP servers: and Lines beginning with a
number sign (#) are comments.
#
# NTP Configuration File
# This file is mandatory for the ntpd daemon
#
#
#
# ** A L L **
#
# "trusting no" prevents this host from synchronizing
# to any host that is not listed below. It is recommended
# that all hosts include the line "trusting no".
#
trusting no
#
#
# ** S E R V E R **
#
# If you are configuring a server, use "peer" entries to
# synchronize to other NTP servers. For example, server1,
# server2, and server3.
#
#peer server1
#peer server2
#peer server3
#
#
#
#
# ** C L I E N T **
#
# If you are configuring a client, use "server" entries to
# synchronize to NTP servers. For example, server1, server2,
# and server3.
#
server server1
server server2
server server3
#
#
#
# ** L O C A L R E F E R E N C E C L O C K **
#
# If you are configuring a local reference clock, include the
# following entry and the "trusting no" entry ONLY.
#
#peer /dev/null LOCL 1 -5 local
#
See Alsontp(1), ntpd(8), ntpdc(8)
RFC 1129--Internet time synchronization: The Network Time Protocol
Introduction to Networking and Distributed System Services
ntp.conf(5)