[SOLVED] Help with new disk but don't know how to add
Hi,
This Linux server is a VM, on the VMware, I added new disk for this system. I was not able to see the new disk. I did try the scan command but didn't work. I then rebooted the system. Now when I do
On the Vmware, I added another disk for 150 Gig.
Here is the output from df -h
where is my new disk? how do I add that.
---------- Post updated at 04:47 PM ---------- Previous update was at 04:25 PM ----------
I was able to add the new...
but when I do mkfs, I get error message. Any idea?
Previously , i remove the disk by
#vxdg -g testdg -k rmdisk testdg02
But i got error when i -k adddisk
bash-2.03# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online invalid
c0t1d0s2 auto:none ... (1 Reply)
Hi All,
We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear:
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run... (4 Replies)
Hi,
Anyone can help me, just want to confirm, if possible adding a disk storage that we have a RAWDATA with +ASM in our database. If possible, what would you recommend "workaround used" from us to do and the preparation. And also how long the downtime will take.
Our disk continuous to grow,... (0 Replies)
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
I've googled the hell out of this, and in my quest to advance my knowledge and expertise in modifying phones to make them more awesome, I ended up here.
I've found answers about patterns and whatnot that seem really complex for what I am trying to do, and basically it is this:
if the line says... (2 Replies)
Hi ,
during 2 weeks i´ve been trying to find them.
i need DCMU packets for managing internal disks on sun fire x4500 and sun fire x4600 on rhel. i have opened to tickets to myoraclesupport but no answer.
please anybody could tell me a link or anythiing?? i´ve been searching and searching... (1 Reply)
Hi,
Trying to add a row of numbers. There are 24 number across. Would like to have column 25 sum each row.
10 3 45 49 0 24... Sum
3 200 3 9 1 3 ...... Sum
9 7 20 9 8 10 ...... Sum
Thank you. (5 Replies)
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Update:
The / file system (/dev/rdsk/c1t0d0s0) is being checked
fsck unable to stat
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F ufs /dev/rdsk/c1t0d0s0).
Root password for system maintenance (control-d to bypass):
I am unable to hit control-d to by pass.
I... (50 Replies)
Discussion started by: br1an
50 Replies
LEARN ABOUT OSF1
disklabel
disklabel(4) Kernel Interfaces Manual disklabel(4)NAME
disklabel - Disk pack label
SYNOPSIS
#include <sys/disklabel.h>
DESCRIPTION
Each disk or disk pack on a system may contain a disk label which provides detailed information about the geometry of the disk and the par-
titions into which the disk is divided. It should be initialized when the disk is formatted, and may be changed later with the disklabel
program. This information is used by the system disk driver and by the bootstrap program to determine how to program the drive and where
to find the file systems on the disk partitions. Additional information is used by the file system in order to use the disk most effi-
ciently and to locate important file system information. The description of each partition contains an identifier for the partition type
(standard file system, swap area, etc.). The file system updates the in-core copy of the label if it contains incomplete information about
the file system.
The label is located in sector number LABELSECTOR of the drive, usually sector 0 (zero) where it may be found without any information about
the disk geometry. It is at an offset LABELOFFSET from the beginning of the sector, to allow room for the initial bootstrap. The disk
sector containing the label is normally made read-only so that it is not accidentally overwritten by pack-to-pack copies or swap opera-
tions; the DIOCWLABEL ioctl, which is done as needed by the disklabel program, allows modification of the label sector.
A copy of the in-core label for a disk can be obtained with the DIOCGDINFO ioctl; this works with a file descriptor for a block or charac-
ter (raw) device for any partition of the disk. The in-core copy of the label is set by the DIOCSDINFO ioctl. The offset of a partition
cannot generally be changed, nor made smaller while it is open. One exception is that any change is allowed if no label was found on the
disk, and the driver was able to construct only a skeletal label without partition information. Finally, the DIOCWDINFO ioctl operation
sets the in-core label and then updates the on-disk label; there must be an existing label on the disk for this operation to succeed.
Thus, the initial label for a disk or disk pack must be installed by writing to the raw disk. All of these operations are normally done
using the disklabel program.
RELATED INFORMATION
Files: disktab(4)
Commands: disklabel(8) delim off
disklabel(4)