Solaris Logic to transmit traffic to physical interfaces ( eg ce0 and ce1)
Just wanted to understand what is the logic being used by Solaris(kernel) to transmit data/traffic on physical interfaces.
I have seen most of the time traffic is being sent to interface ce0 and sometime to ce1.
I have removed ip address from below command for some reason.
Trying to figured out the logic/algorithm used to send traffic/data. i have gone through couple of document and understand, when system transmit a packet, it must locate the "BEST" interface over which to sent it.
but not so cleared about the algorithm or logic behind,since most of the time it uses ce0 and sometimes it use ce1 how?
Your early response will be appreciated with detailed explanation about this logic.
Thanks
Nadeem
Moderator's Comments:
edit by bakunin: Please view this code tag video for how to use code tags when posting code and data.
Hi,
Have a solaris 9 e420, one onboard nic.
Now I added a quad nic card.
I have never had more than a single interface.
Any help on setting this new card up?
or links?
PLease? ; thanks! (2 Replies)
i have ce0 and ce1 online, on 2 different networks. im getting a message that says one nic is trying to assume the others IP or something to thta effect.
I do ifconfig -a and i see they have the same mac.
How do i deal with this?
Solaris 9 i beleive 04/04
Thanks,
Brian (2 Replies)
Hi,
I am trying to configure an ip address, netmask, and default gateway on my solaris machine. For example, in Linux I would do the following command:
#ifconfig eth0 xx.xx.xx.xx netmask 255.0.0.0
#add route or route add default xxx.xxx.xxx.xxx
In Solaris 10, I believe the commands are... (7 Replies)
Hi Community,
I've a problem with IPMP: I have 2 physical interfaces, 1 "physical IP" and 1 VirtualIP.
My question is:
is it possible to have IPMP configuring 2 physical interfaces with the same "physical" IP Address?
for example:
ce0 10.10.10.10
ce5 10.10.10.10
and
VIP... (5 Replies)
hi,
Can I listdown all available net interfaces on my system like SF4800 or Netra440.
I know there are 4 port physically present but I can't see or list them using either
sysdef -v
prtconf -vp
prtdiag -v
dladm
kstat
may be I'm missing switched on these or may some other command... (8 Replies)
I have a Linux box with 3 ethernet cards:
- eth0 - connected to internet (dhcp)
- eth1 - 192.168.0.1 connected to embedded device1
- eth2 - 192.168.0.1 also connected to embedded device2
(both eth1/eth2 have to be in identical, though separate, private networks).
Also, on eth0 I have two... (1 Reply)
Hello,
I have a machine with Solaris 8, and it has multiple interfaces that are connected to the same network which means they all have metric 0 (1 hop) to the default gateway.
assume:
* e1000g0: 10.1.1.70
* e1000g2: 10.1.1.72
* e1000g4: 10.1.1.74
* e1000g5: 10.1.1.76
* gateway:... (11 Replies)
can we configure the ce0 and ce1 interface as ce4000 and ce5000 in solaris 9
I have a server configured similar way.. I need to setup another two server in such configuration find the sample output from working server.
Please help
root@judi::/dev# ifconfig -a
lo0:... (3 Replies)
Hi All
Kindly let me know how can I move Solaris 10 OS running update 10 on physical machine to another machine solaris zone running Solaris 10 update 11 (2 Replies)
Discussion started by: amity
2 Replies
LEARN ABOUT DEBIAN
gappletviewer
GAPPLETVIEWER(1) GNU GAPPLETVIEWER(1)NAME
gappletviewer - Load and runs an applet
SYNOPSIS
appletviewer [OPTION]... URL...
appletviewer [OPTION]... -code CODE
appletviewer [OPTION]... -plugin INPUT,OUTPUT
DESCRIPTION
The appletviewer tool loads and runs an applet.
Use the first form to test applets specified by tag. The URL should resolve to an HTML document from which the appletviewer will extract
applet tags. The APPLET, EMBED and OBJECT tags are supported. If a given document contains multiple applet tags, all the applets will be
loaded, with each applet appearing in its own window. Likewise, when multiple URLs are specified, each applet tag instance is given its
own window. If a given document contains no recognized tags the appletviewer does nothing.
appletviewer http://www.gnu.org/software/classpath/
Use the second form to test an applet in development. This form allows applet tag attributes to be supplied on the command line. Only one
applet may be specified using the -code option. The -code option overrides the URL form -- any URLs specified will be ignored.
appletviewer -code Test.class -param datafile,data.txt
gcjwebplugin uses the third form to communicate with the appletviewer through named pipes.
OPTIONS
URL OPTIONS
-debug
This option is not yet implemented but is provided for compatibility.
-encoding CHARSET
Use this option to specify an alternate character encoding for the specified HTML page.
APPLET TAG OPTIONS
-code CODE
Use the -code option to specify the value of the applet tag CODE attribute.
-codebase CODEBASE
Use the -codebase option to specify the value of the applet tag CODEBASE attribute.
-archive ARCHIVE
Use the -archive option to specify the value of the applet tag ARCHIVE attribute.
-width WIDTH
Use the -width option to specify the value of the applet tag WIDTH attribute.
-height HEIGHT
Use the -height option to specify the value of the applet tag HEIGHT attribute.
-param NAME,VALUE
Use the -param option to specify values for the NAME and VALUE attributes of an applet PARAM tag.
PLUGIN OPTION
-plugin INPUT,OUTPUT
gcjwebplugin uses the -plugin option to specify the named pipe the appletviewer should use for receiving commands (INPUT) and the one
it should use for sending commands to gcjwebplugin (OUTPUT).
DEBUGGING OPTION
-verbose
Use the -verbose option to have the appletviewer print debugging messages.
STANDARD OPTIONS
-help
Use the -help option to have the appletviewer print a usage message, then exit.
-version
Use the -version option to have the appletviewer print its version, then exit.
-JOPTION
Use the -J option to pass OPTION to the virtual machine that will run the appletviewer. Unlike other options, there must not be a
space between the -J and OPTION.
BUGS SEE ALSO AUTHOR 0.98 2010-07-05 GAPPLETVIEWER(1)