07-21-2011
Ok I am using RHEL 5.4 so there is no "rpmbuild / --rebuild".
I created a repo from my DVD and managed to install the necessary packages.
So I have run a "make install" on the e1000 src dir and all seem good until I try and include/add the module I get the following error:
insmod: error inserting <path_to_e1000.ko>: -1 Invalid module format
Has anybody seen this before or know what the problem might be?
5 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
HI,
When I do 'service network restart' , I am getting the following error.
"3c501 device eth0 does not seem to be present, delaying initialization"
Can any one suggest me the cause/solution for this?
When I do 'lspci' it is showing the ehternet card as
" Ethernet controller"Marvell... (2 Replies)
Discussion started by: praveen_b744
2 Replies
2. AIX
I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570? (4 Replies)
Discussion started by: rainbow_bean
4 Replies
3. Solaris
In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ?
VM1:/>cd /dev/global
-bash: cd: /dev/global: No... (1 Reply)
Discussion started by: fugitive
1 Replies
4. Red Hat
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
Discussion started by: Tanmoy
0 Replies
5. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
LEARN ABOUT DEBIAN
aoe-discover
aoe-discover(8) System Manager's Manual aoe-discover(8)
NAME
aoe-discover - tell aoe driver to discover AoE devices
SYNOPSIS
aoe-discover
DESCRIPTION
The aoe-discover command tells the aoe driver to discover ATA over Ethernet (AoE) devices on the network. All network interfaces will be
probed with a AoE config query broadcast.
If the aoe-interfaces command has limited the allowable network interfaces, only devices discovered via allowable interfaces will become
available. The default is to make available all AoE devices found on all accessible ethernet networks.
It's good to run the aoe-discover command after running aoe-interfaces.
EXAMPLE
In this example, the root user on a host named nai loads the aoe module with only eth0 allowable for AoE traffic. After remembering that
shelf 7 is on eth3, this sysadmin uses aoe-interfaces to add eth3 to the list of allowable network interfaces and then calls aoe-discover
to ask the aoe driver to look for new AoE devices.
nai:~# modprobe aoe aoe_iflist="eth0"
nai:~# aoe-stat
e10.9 eth0 up
nai:~# aoe-interfaces eth0 eth3
nai:~# aoe-discover
nai:~# aoe-stat
e7.0 eth3 up
e7.1 eth3 up
e7.2 eth3 up
e7.3 eth3 up
e7.4 eth3 up
e7.5 eth3 up
e7.6 eth3 up
e7.7 eth3 up
e7.8 eth3 up
e7.9 eth3 up
e10.9 eth0 up
SEE ALSO
aoe-interfaces(8), aoe-stat(8), aoetools(8).
AUTHOR
Ed L. Cashin (ecashin@coraid.com)
aoe-discover(8)