Device eth0 issue Post: 302540449

5 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Eth err: "3c501 device eth0 does not seem to be present"

HI, When I do 'service network restart' , I am getting the following error. "3c501 device eth0 does not seem to be present, delaying initialization" Can any one suggest me the cause/solution for this? When I do 'lspci' it is showing the ehternet card as " Ethernet controller"Marvell...

2. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

3. Solaris

Global device issue in sun cluster3.2

In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ? VM1:/>cd /dev/global -bash: cd: /dev/global: No...

4. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

5. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

LEARN ABOUT DEBIAN

aoe-discover

aoe-discover(8) 					      System Manager's Manual						   aoe-discover(8)

NAME

       aoe-discover - tell aoe driver to discover AoE devices

SYNOPSIS

       aoe-discover

DESCRIPTION

       The  aoe-discover  command tells the aoe driver to discover ATA over Ethernet (AoE) devices on the network.  All network interfaces will be
       probed with a AoE config query broadcast.

       If the aoe-interfaces command has limited the allowable network interfaces, only devices discovered via allowable  interfaces  will  become
       available.  The default is to make available all AoE devices found on all accessible ethernet networks.

       It's good to run the aoe-discover command after running aoe-interfaces.

EXAMPLE

       In  this  example, the root user on a host named nai loads the aoe module with only eth0 allowable for AoE traffic.  After remembering that
       shelf 7 is on eth3, this sysadmin uses aoe-interfaces to add eth3 to the list of allowable network interfaces and then  calls  aoe-discover
       to ask the aoe driver to look for new AoE devices.

	      nai:~# modprobe aoe aoe_iflist="eth0"
	      nai:~# aoe-stat
		 e10.9		  eth0		    up
	      nai:~# aoe-interfaces eth0 eth3
	      nai:~# aoe-discover
	      nai:~# aoe-stat
		  e7.0		  eth3		    up
		  e7.1		  eth3		    up
		  e7.2		  eth3		    up
		  e7.3		  eth3		    up
		  e7.4		  eth3		    up
		  e7.5		  eth3		    up
		  e7.6		  eth3		    up
		  e7.7		  eth3		    up
		  e7.8		  eth3		    up
		  e7.9		  eth3		    up
		 e10.9		  eth0		    up

SEE ALSO

       aoe-interfaces(8), aoe-stat(8), aoetools(8).

AUTHOR

       Ed L. Cashin (ecashin@coraid.com)

																   aoe-discover(8)