Has anyone had any experience with VXFS and ACL's? For some reason when these two are used together ACL's don't seem to work properly (i.e. sometimes ACL's won't be applied to files in a directory so that when trying to move the directory, the new directory is created but the old directory still... (3 Replies)
hi guys,
I am studying for the solaris scsa and i want to practice with ufsdump and restores, fssnaps etc...
my question is, i finally found a server with a tape drive attached that i can mess arouund with because its not a critical box.
its running solaris 8, and i want to do a ufsdump, but... (2 Replies)
Dear all,
What should I do with the following error message:
vxfs: mesg 001: vx_nospace - /dev/root file system full (1 block extent)
Thanks for your advises, (1 Reply)
Hello,
Am basically working on VxFS filesystem and while tracking the file, I got stuck at one point.
As I am able to locate the superblock(it is at offset 1024 from the start of partition). And from superblock I got the sector no. of "OLT extent".
By jumping to the sector no where OLT... (1 Reply)
Hi,
How do I determine the free space below?
# vxdg -g msb_db_dg free
DISK DEVICE TAG OFFSET LENGTH FLAGS
msb_db_dg01 sdb sdb 312475648 316571392 n
Thanks! (1 Reply)
Discussion started by: itik
1 Replies
LEARN ABOUT HPUX
vxbootsetup
vxbootsetup(1M)vxbootsetup(1M)NAME
vxbootsetup - set up system boot information on a Veritas Volume Manager disk
SYNOPSIS
/etc/vx/bin/vxbootsetup [-g diskgroup] [medianame ... ]
DESCRIPTION
The vxbootsetup utility configures physical disks so that they can be used to boot the system. Before vxbootsetup is called to configure a
disk, the required volumes, standvol, rootvol and swapvol (and optionally, dumpvol) must be created on the disk. All of these volumes must
be contiguous with only one subdisk.
The -g option may be used to specify the boot disk group.
If no medianame arguments are specified, all disks that contain usable mirrors of the root, swap, /usr and /var volumes are configured to
be bootable.
If medianame arguments are given, only the disks that are associated with the specified disk names are configured to be bootable.
vxbootsetup requires that:
o The root volume must be named rootvol and must have a usage type of root.
o The swap volume must be named swapvol and must have a usage type of swap.
o The volumes containing /usr and /var (if any) must be named usr and var, respectively.
See the chapter "Recovery from Boot Disk Failure" in the Veritas Volume Manager Troubleshooting Guide for detailed information on how the
system boots and how VxVM impacts the system boot process. The vxmirror, vxrootmir, and vxresize utilities call vxbootsetup automatically.
If you use vxassist, or vxmake and vxplex to create mirrors of the root volume on a disk, you must run vxbootsetup explicitly to make the
disk bootable.
ARGUMENTS
medianame
Specifies the disk name (disk media name) of a VM disk that is to be configured as bootable.
SEE ALSO disksetup(1M), edvtoc(1M), vxassist(1M), vxevac(1M), vxinstall(1M), vxintro(1M), vxmake(1M), vxmirror(1M), vxplex(1M), vxresize(1M),
vxrootmir(1M)
Veritas Volume Manager Troubleshooting Guide
VxVM 5.0.31.1 24 Mar 2008 vxbootsetup(1M)